Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D4099–95 defines material properties and performance characteristics for rigid PVC prime windows and sliding glass doors. It applies to complete assemblies with hardware and anchors. 🏗️ Scope and Application This standard is limited to prime windows and doors, excluding…
ASTM D41/D41M – 11 (Reapproved 2023), also designated as AASHTO No. M116, establishes the standard specification for asphalt primer used in roofing, dampproofing, and waterproofing applications. This specification covers asphaltic primers suitable for application to concrete, masonry, metal, and asphalt…
📐 Scope and Particulate Collection Parameters This standard, D4096 −17 (Reapproved 2023), specifies the high-volume sampler method for determining total suspended particulate matter (TSP) in the atmosphere. It involves drawing a large volume of air, typically 1600 m³ to 2400…
🏗️ Scope and Key Application Limitations ASTM D4097-19 provides the definitive standard specification for contact-molded, glass-fiber-reinforced thermoset resin corrosion-resistant tanks. This specification covers cylindrical tanks fabricated by contact molding specifically for above-ground vertical installation. Their primary purpose is to contain…
📐 Apparatus and Reagents Specification The apparatus and reagents prescribed in Sections 6 and 7 of ASTM D4094-07 are essential for accurate acid content determination. The tables below detail the key equipment and chemical requirements. 🔧 Equipment 📏 Specification 🎯…
ASTM D4095−97 (Reapproved 2020), titled Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes, provides a rapid, indirect analytical method for quality control. By establishing a predictable correlation between refractive index and total…
ASTM D4092-21, officially the Standard Terminology for Plastics: Dynamic Mechanical Properties, establishes the precise language for describing the viscoelastic behavior of polymer systems. Under the jurisdiction of ASTM Committee D20, this terminology applies specifically to materials in the form of…
This standard, designated D4093 −23, provides a quantitative test method for photoelastic measurements of birefringence and residual strains in transparent or translucent plastic materials. It is under the jurisdiction of ASTM Committee D20 on Plastics (Subcommittee D20.10 on Mechanical Properties)…
📐 Scope and Significance of the Hardgrove Grindability Index The ASTM D409/D409M-24 standard specifies a method for determining the relative grindability of coal, known as the Hardgrove Grindability Index (HGI). This index is crucial for assessing the ease of pulverization,…
📐 Scope and Terminology Overview This standard practice covers visual methods for detecting metamerism and estimating the magnitude of metameric color differences. It specifically addresses illuminant metamerism and observer metamerism, as defined in Section 1.2. The term “metamerism” refers to…