admin

Standard D4161-24 establishes the requirements for axially unrestrained bell-and-spigot gasket joints, including couplings, for machine-made “fiberglass” (glass-fiber-reinforced thermosetting-resin) piping systems. This specification is essential for ensuring joint integrity in pressure (typically up to 250 psi) and nonpressure systems conveying water,…

🛠️ Apparatus and Equipment Specifications The D4164-24 standard mandates highly specific equipment to ensure consistent and repeatable measurements of tapped packing density. The core of the setup is the tapping device, which must operate with a worm drive reduction ratio…

📐 Specimen Types and Preparation This test method applies to woven textile fabrics subjected to abrasion testing via the oscillatory cylinder method. According to Section 5.1, the resistance to abrasion is complex and depends on inherent mechanical properties of the…

This guide, officially designated D4158-08 (Reapproved 2020), provides a comprehensive methodology for assessing the abrasion resistance of a wide variety of textile materials using the uniform abrasion testing instrument. Distinct from other abrasion methods that focus on specific wear patterns,…

ASTM D4155-22 serves as the benchmark performance specification for woven fabrics intended for women’s and girls’ sportswear, shorts, slacks, and suiting fabrics. This standard establishes a comprehensive framework of test methods and acceptance criteria to ensure product durability, colorfastness, and…

📐 Scope and Referenced Standards ASTM D4156-14 provides a performance specification for knitted fabrics used in women’s and girls’ sportswear, covering any fiber type or blend. The requirements are applicable to both length and width directions for relevant properties. The…

📐 Scope and Application ASTM D4153-22 is a performance specification for woven fabrics used in the manufacture of men’s, women’s, and children’s handkerchiefs, including both utilitarian and decorative types. This standard specifies requirements for fabric properties such as tearing strength,…

📐 Scope and Application of D4154-22 ASTM D4154-22 establishes the performance specification for knitted and woven fabrics comprising any textile fiber or mixture of fibers used in the manufacture of men’s and boys’ beachwear and sports shirts. These requirements apply…

🛡️ Scope and Test Method Overview ASTM D4151-23, under the jurisdiction of Committee D13 on Textiles, provides a standardized test method for assessing the flammability of blanket fabrics. It aims to identify materials that ignite easily and propagate flame across…

📐 Scope and Classification Basis This standard, designated D4149-82 (Reapproved 2012), provides a classification of both qualitative and quantitative techniques for the collection of phytoplankton from inland surface waters. The selection of a specific technique is critically dependent upon the…