Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Significance This test method covers the determination of methanol in propylene concentrates in the range of approximately 4 mg/kg to 40 mg/kg (parts-per-million by mass). The values stated in SI units are regarded as standard, with otherā¦
ASTM D4865-23 is the Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems. It describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation, and methods forā¦
📐 Scope and Purpose of D4863 Standard D4863-13, developed by ASTM Subcommittee D02.B0.06 on Two-Stroke Cycle Gasoline, provides a rigorous standardized test method for determining the lubricity of two-stroke-cycle gasoline engine lubricants. Specifically, the test evaluates the ability of aā¦
🔬 Scope and Sampling Principles ASTM D4861-23 is a standard practice for sampling air to detect pesticides and polychlorinated biphenyls (PCBs) and provides guidance on selecting analytical methods. Developed in accordance with internationally recognized standards, it covers common pesticides andā¦
ASTM D4859-13 specifies the performance requirements for two-stroke-cycle spark-ignition gasoline engine lubricants designated “TC”. This standard is aimed at engines other than outboard motors, specifically those prone to ring sticking, deposit-induced preignition, piston scuffing, and spark plug fouling. SI unitsā¦
🧪 Scope and Significance of D4860‑22 The ASTM D4860‑22 standard provides a rapid, portable method for the field and laboratory assessment of middle distillate and aviation turbine fuels. Its primary purpose is to numerically rate free water and quantify visibleā¦
📐 Scope and Referenced Apparatus ASTM D4858-13 is a standard test method developed under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants. It is specifically intended to evaluate the performance of lubricants in two-stroke-cycle spark-ignitionā¦
The ASTM D4856-23 standard describes a specific and sensitive ion chromatographic (IC) method for determining sulfuric acid mist (H₂SO₄) in workplace air samples collected on filters. This method is widely used for industrial hygiene compliance monitoring and exposure assessment. 🧪ā¦
🛢️ Overview and Scope of ASTM D4857-12 ASTM D4857-12, originally approved in 1988 and last revised in 2012, is under the jurisdiction of Subcommittee D02.B0.06 on Two-Stroke Cycle Gasoline. This standard test method evaluates the performance of lubricants intended forā¦
🎯 Purpose and Scope of D4855-97 ASTM D4855-97 (Reapproved 2002) establishes a comprehensive statistical and experimental framework for evaluating and comparing test methods under strictly controlled conditions. Administered by Committee D13 on Textiles (Subcommittee D13.93 on Statistics), this practice isā¦