Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Material Scope and Classification The ASTM D4895-18 (Reapproved 2023) standard specifically defines the requirements for polytetrafluoroethylene (PTFE) resins that are produced by coagulating a dispersion. These materials are homopolymers of tetrafluoroethylene or modified homopolymers containing ≤1% by weight of…
📐 Scope and Classification of PTFE Granular Resins ASTM D4894-19 (Reapproved 2024) defines specifications for granular polytetrafluoroethylene (PTFE) materials used in molding and ram extrusion. These resins are homopolymers of tetrafluoroethylene or modified homopolymers containing not more than 1% by…
🔬 Overview and Significance ASTM D4893-20 covers the determination of the percent of pitch volatility. As an empirical test method, it requires strict adherence to the defined procedure to ensure repeatable and accurate results. This test method is widely used…
ASTM D4891-13 (Reapproved 2018) defines the standard test method for determining the total heating value of natural gases and gaseous mixtures within the flare gas range using stoichiometric combustion techniques. This method is extensively utilized for regulatory compliance, custody transfer,…
📐 Scope, Apparatus, and Specimen Preparation ASTM D4892 – 24, “Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method),” specifies a procedure for determining the density of solid pitch using a helium pycnometer. The standard, under the jurisdiction…
ASTM D4890-24 provides standard test methods for visually measuring the color of clear polyester and polyether liquid polyols using the Gardner and APHA (Platinum-Cobalt) color scales. These methods are essential for quality control in polyurethane raw materials, ensuring consistency and…
ASTM D4889-21 defines two standardized test methods for determining the viscosity of crude or modified isocyanates used in polyurethane production. Applicable to TDI, MDI, and polymeric MDI, these methods are essential for research, quality control, and specification testing. Method A…
ASTM D4887/D4887M-11 (Reapproved 2021) establishes a rigorous laboratory practice for preparing hot recycled bituminous binder blends. This practice is fundamental for evaluating the performance characteristics of recycled asphalt materials before field implementation. It outlines an iterative trial blend process to…
📐 Test Method Overview ASTM D4888‑20 provides a rapid field procedure for measuring water vapor in natural gas pipelines using length‑of‑stain detector tubes. The method is designed for simplicity, allowing nontechnical personnel to perform spot checks with minimal training. Detector…
The ASTM D4886-23 standard, officially titled the Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method), provides a laboratory procedure for determining the resistance of geotextile fabrics to abrasive wear. This method is specifically designed for geotextiles using…