Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Summary of Test Method This test method, designated as ASTM D4998-13 (Reapproved 2021), is used to screen lubricants for gear wear. It is primarily applicable to tractor hydraulic fluids but may be suitable for other applications. The…
📋 Scope and Classification of D4995-10 Solvent Grades The ASTM D4995-10 (Reapproved 2020) specification establishes the requirements for three distinct grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane solvent. This standard is critical for selecting the appropriate solvent grade based on specific cleaning and…
🔬 Scope and Significance of ASTM D4993-08 ASTM D4993-08 (Reapproved 2014) is a standard practice under the jurisdiction of ASTM Committee D19 on Water. It provides an authoritative methodology for calculating the scaling potential of silica (SiO₂) in reverse osmosis…
This standard practice, designated D4994‑24, provides standardized methodologies for the recovery of replicable viruses from municipal wastewater sludges. It specifically favors the detection of human enteroviruses and is intended to unify laboratory practices, enabling meaningful comparisons of viral data across…
📐 Scope and Defining Evaluation Principles ASTM D4992-22 provides a risk-based framework for evaluating rock intended for erosion control. A core principle of the practice is that the evaluation’s complexity must be governed by the project’s size and design requirements,…
📐 Scope and Classification This specification covers glass felt impregnated with coal-tar intended for use with coal-tar pitch in built-up roofing and waterproofing systems. The material is classified as one type under Section 4.1. Key terminology includes “net dry mass,”…
📐 Scope and Definition of Rigid Containers ASTM D4991-07 (Reapproved 2023) provides a standardized test method for evaluating the leakage resistance of empty rigid containers under differential pressure conditions simulating air transport. It is specifically suitable for containers intended for…
📐 Specimen Geometry and Requirements Test specimens are prepared using ring molds with precise dimensions. The molds are constructed from copper or brass tubing with an inside diameter of 25.40 ± 0.01 mm [1.0000 ± 0.0025 in.] and a height…
🔍 Scope and Significance of D4988-96 The ASTM D4988-96 (Reapproved 2006) standard, formally titled the “Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper),” is issued under the fixed designation D4988. It provides…
📐 Scope and Applicability of D4986-22 ASTM D4986-22 is a fire-test-response standard that establishes a small-scale laboratory procedure for assessing the horizontal burning characteristics of cellular polymeric materials. Specifically, the test method is applicable to materials with a density of…