Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
The ASTM D5028-17 standard, officially titled “Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis,” provides a definitive methodology for assessing the curing behavior of thermosetting resins used in the pultrusion process. By employing Differential Scanning Calorimetryā¦
🔥 Standard Overview and Scope ASTM D5025-20a provides a definitive specification for the physical dimensions and operational characteristics of a laboratory burner used as an ignition source in small-scale flammability tests on plastic materials. The standard defines a burner suitableā¦
ASTM D5024-23 defines the standard methodology for evaluating the dynamic mechanical properties of plastics in compression. It applies to a wide range of materials, including thermoplastic and thermosetting resins, composites, and cellular plastics, using nonresonant forced-vibration techniques. 📐 Specimen Geometryā¦
ASTM D5022-07 provides specifications for the identification of small-volume containers of drugs intended to be diluted before parenteral administration. The standard addresses container shape, labeling, vial closures, and ampoule markings to ensure safe handling and prevent accidental misuse. 📦 Containerā¦
📐 Specimen Geometry and Types ASTM D5023-23 specifies the use of rectangular bar specimens for dynamic mechanical testing in flexure. These specimens may be molded directly or fabricated by cutting from sheets, plates, or molded shapes to meet the requirementsā¦
📊 Scope and Classification of TECEA Materials This specification, ASTM D 5021 – 00, outlines the requirements for Thermoplastic Elastomer–Chlorinated Ethylene Alloy (TECEA). These materials are suitable for a variety of processing methods, including injection molding, extrusion, blow molding, andā¦
📜 Scope and Significance This test method, designated D502-89 (Reapproved 2023), covers the determination of the particle size of soaps and other detergents by hand sieving and machine sieving methods. The values stated in SI units are to be regardedā¦
📐 Scope, Apparatus, and Specimen Geometry This test method, designated D5018-23, covers the determination of the apparent shear viscosity of coal-tar and petroleum-based pitches. It is specifically applicable to materials with a Mettler softening point (SP) ranging from approximately 95ā¦
📜 Scope and Application ASTM D5019-07a establishes the standard specification for reinforced non-vulcanized polymeric sheets made from Chlorosulfonated Polyethylene (CSM). These sheets are intended for use as single-ply roof membranes exposed to the weather. The sheet is reinforced with fiberā¦
🔬 Scope and Applicability of ASTM D5017-24 ASTM D5017-24 defines the standard test method for the determination of the molar composition of Linear Low Density Polyethylene (LLDPE) copolymers using high-temperature Carbon-13 Nuclear Magnetic Resonance (¹³C NMR) spectroscopy. This method appliesā¦