IEC 61152, titled “Safety of machinery — Electro-sensitive protective equipment — Part 4: Particular requirements for equipment using ultrasonic principles”, was an international standard that specified requirements for ultrasonic-based presence-sensing devices used to protect personnel near hazardous machinery. Published as…

ESPE Part 5: CCTV-Based Vision Guarding Systems for Hazardous Zone Detection ⚠️ Standard Status Notice: IEC 61153 has been withdrawn. However, its technical concepts laid the groundwork for modern machine vision safety systems. This article documents the core engineering value…

📅 Standard Edition: IEC 61145 (Withdrawn, superseded by IEC 60216-7) | Scope: Thermal endurance evaluation of electrical insulating materials | Method: Fixed Time Method The long-term thermal endurance of electrical insulating materials is a cornerstone parameter in the design and…

Standard Overview IEC 61146 is a multi-part measurement standard covering non-broadcast PAL/SECAM/NTSC video cameras. It defines standardized test conditions, test charts, and calculation methods for core parameters including resolution, sensitivity, signal-to-noise ratio, color reproduction, and geometric distortion across three camera…

Standard Overview: IEC 61148 establishes a unified identification and marking system for terminals and reference designations of power electronic equipment, including variable-frequency drives, inverters, converters, rectifiers, and cycloconverters. The current edition is IEC 61148:2019. Compliance with this standard ensures unambiguous…

💡 Standard Snapshot: IEC 61149 is the foundational standard for Electro-Sensitive Protective Equipment (ESPE) in machinery safety. It defines the general requirements for design, construction, testing, and marking of non-contact protective devices such as safety light curtains and laser scanners.…

Electric shock remains the most lethal hazard in electrical engineering. IEC 61140 serves as the foundational standard for protection against electric shock, establishing a unified framework that applies to all electrical equipment, installations, and systems — from household appliances to…

📌 Standard Snapshot: IEC 61141 established the system of preferred frequencies for acoustical measurements, defining octave-band and fractional-octave-band center frequencies that underpin modern sound level meters, noise monitoring instruments, and acoustic test equipment. Although withdrawn and superseded by ISO 266,…

📅 2026-05-16🏷️ IEC Standards | X-Y Recorders | Precision Measurement | Analog Instrumentation⏱ 15 min read 📑 Table of Contents 1. Standard Architecture: From IEC 61028 to the Two-Part IEC 61143 Framework 2. Part 1: Definitions and Requirements in Detail…

📅 2026-05-16 · 📂 Category: IEC Standards · 🏷️ Insulating Materials · Thermal Aging · Temperature Index 1️⃣ Standard Overview and Historical Context IEC 61144, titled “Test method for the determination of the temperature index of electrical insulating materials”, is…

🏷️ Railway Engineering 🏷️ Rolling Stock Testing 🏷️ Brake Systems 🏷️ Running Dynamics 🏷️ Safety Validation 🏷️ IEC 61133 IEC 61133:2016 is a fundamental international standard in the railway sector that establishes systematic requirements for the inspection and testing of…

Standard AnalysisInsulating Materials ⚠️ Standard Status Notice: IEC 61134 has been withdrawn and replaced by IEC 60216-5. Nevertheless, the fixed time method (FTM) defined in this standard remains a fundamental approach for accelerated thermal aging assessment of electrical insulation. It…

🚗 Standard History IEC 61136 | Withdrawn · Superseded by IEC 61982 📅 Published 2026-05-16 💡 Standard Background IEC 61136 (Electric road vehicles — Specifications for on-board batteries) was one of the earliest international standards specifically addressing traction batteries for…

📅 2026-05-16  |  📂 Live Working Safety  |  ⏱ 12 min read ⚡ Safety Critical: Earthing and short-circuiting cables are the last line of defence for personnel working on de-energised power systems. A cable failure under fault conditions can result…

📅 2026-05-16  |  📂 IEC 61125  |  🏷️ Insulating Liquids Oxidation Stability Transformer Oil 💡 Standard Overview: IEC 61125 specifies test methods for evaluating the oxidation stability of insulating liquids used primarily in transformers, switchgear, and other electrical equipment. Through…

The thermal endurance of magnet wire is the single most critical factor determining the service life of motors, transformers, and solenoid coils. IEC 61126 provided the standardized method for determining the temperature index (TI) of enamelled round copper winding wires,…

Standard Overview: IEC 61127 (withdrawn) was a seminal early standard governing compliance test plans for success ratio in reliability testing. It established a rigorous statistical decision framework based on pass/fail (binomial) data, specifying methods to determine producer risk ( alpha…