Standard: IEC 61211 | Scope: Ceramic material or glass insulators for overhead lines with nominal voltage > 1 kV 💡 Key Insight: IEC 61211 specifies the impulse puncture test method in air for ceramic or glass insulators used on overhead…

✅ Standard at a Glance IEC 61202 is the international generic specification for fibre optic isolators, covering classification, performance requirements, and standardized test procedures. Prepared by IEC Technical Committee 86 (Fibre optics), this standard applies to non-reciprocal optical devices that…

✅ Standard at a Glance IEC 61203 provides the comprehensive maintenance guide for synthetic organic ester insulating liquids used in power and distribution transformers. Developed by IEC Technical Committee 10 (Fluids for electrotechnical applications), this standard supplements the product specification…

✅ Standard at a Glance IEC 61204 is the international standard governing the performance characteristics, test methods, and qualification requirements for low-voltage DC power supplies. Developed by IEC Technical Committee 22 (Power electronic systems and equipment), this standard applies to…

✅ Standard at a Glance IEC 61205 is the international standard that specifies performance characterization and test methods for ultrasonic dental descalers. Developed by IEC Technical Committee 87 (Ultrasonics) in collaboration with ISO/TC 106 (Dentistry), this standard establishes a unified…

✅ Standard at a Glance IEC 61200 is a multi-part guidance document series that serves as the explanatory companion to the IEC 60364 series (Low-voltage electrical installations). While IEC 60364 provides the normative requirements, IEC 61200 offers detailed explanations, rationale,…

✅ Standard at a Glance IEC 61201 is the definitive international standard defining the upper voltage limits for extra-low voltage (ELV) systems. Published by IEC Technical Committee 64 (Electrical installations and protection against electric shock), it establishes the boundary between…

Standard Scope: IEC 61196 is a multi-part international standard covering coaxial communication cables for telecommunications and similar electronic equipment. It establishes a comprehensive technical framework spanning cable construction, electrical performance parameters, test methods, and environmental reliability requirements. This standard serves…

Status: Withdrawn  |  Scope: Transformer oils and analogous insulating liquids  |  Core Method: Linearized modeling of tan δ temperature dependence ⚠️ Standard Background IEC 61197 specifies a dedicated test method for establishing the linear relationship between the dielectric dissipation factor…

💡 IEC 61198 is the internationally recognized analytical standard specifying methods for the determination of 2-furfural (2-FAL) and related furanic compounds in mineral insulating oils. It provides the chemical diagnostic basis for non-invasive assessment of cellulose paper insulation degradation in…

Standard: IEC 61199 Latest Edition: 2025 (Amendment 2) Scope: Safety requirements for single-capped fluorescent lamps Category: Lighting Safety Standards 💡 IEC 61199 is the dedicated safety standard for single-capped fluorescent lamps (compact fluorescent lamps, CFLs). Together with IEC 60061 (cap…

📅 Standard Status: Withdrawn · Consolidated into IEC 61191 | 📂 Category: Electronics Manufacturing Process & Quality ⚠️ Standard Status Notice The IEC 61192 series has been withdrawn and its technical content consolidated into the IEC 61191 series. This article…

📅 Technical Analysis · Updated 2026-05 · 📂 IEC 61193 | Quality Assessment | AQL | Sampling Plans 💡 Foreword IEC 61193 is a foundational international standard governing quality assessment systems for electronic components, comprising two distinct parts: Part 1…

💡 Standard Overview: IEC 61194 (First Edition, 1992) defines the principal characteristic parameters of stand-alone photovoltaic (PV) systems, covering battery capacity, autonomy days, load parameters, and standard measurement conditions. This standard serves as a foundational document for off-grid solar system…

💡 Standard Overview: IEC 61195 (Second Edition, 1999 + AMD1:2000) is the definitive international safety standard for double-capped fluorescent lamps for general lighting purposes. It establishes requirements for cap dimensions and interchangeability, electrical safety characteristics, cap temperature rise limits, mechanical…

Key Insight: IEC 61188 is the international standard family governing the design and use of printed boards (PCBs) and printed board assemblies (PCBAs). Its core document, IEC 61188-5-1, is technically identical to IPC-7351B and defines a rigorous mathematical model for…

📅 Standard Series: IEC 61189 (Parts 1–6, Active) | 🏷️ Category: PCB & Electronics Assembly Test Methods | 📖 Reading Time: 12 min If you design, manufacture, or qualify printed circuit boards and electronic assemblies, IEC 61189 is the definitive…