ISO Standard — Space systems — Safety materials — Engineering Technical Article 1. Overview of ISO 29661 ISO 29661 establishes requirements for safety materials used in space systems, covering material selection, flammability control, offgassing constraints, and contamination prevention. The standard…

ISO Standard — Space systems — Cleanliness — Engineering Technical Article 1. Overview of ISO 29664 ISO 29664 defines cleanliness requirements for space systems hardware, including acceptable levels of particulate and molecular contamination on critical surfaces. It establishes classification levels,…

ISO Standard — Space systems — EMC — Engineering Technical Article 1. Overview of ISO 29681 ISO 29681 establishes electromagnetic compatibility (EMC) requirements for space systems, covering both conducted and radiated emissions and susceptibility. The standard ensures that spacecraft subsystems…

ISO Standard — Space systems — Laser safety — Engineering Technical Article 1. Overview of ISO 29701 ISO 29701 establishes safety requirements for laser systems used in space applications, covering crew exposure limits, remote sensing hazards, and operational interlock controls.…

Understanding the Dual-Model Methodology: Archetype Definition Language, Clinical Governance, and Semantic Interoperability in Electronic Health Records 1. Understanding ISO 29585 and the Archetype Framework ISO 29585 specifies a framework for the representation, management, and interchange of clinical knowledge using archetypes.…

Systematic Hazard Identification, Risk Assessment, and Safety Verification for Launch Vehicles, Spacecraft, and Ground Support Systems 1. Scope and Principles of ISO 29601 ISO 29601 establishes the requirements for safety management systems for space systems throughout the entire project lifecycle…

A Practical Guide to Embedding Risk Management into Requirements, Design, Verification, and Lifecycle Management of Complex Systems 1. Introduction to ISO 29621 and Its Role in Risk Management ISO 29621 provides guidance on the application of risk management principles to…

Complete Guide to ISO_29581-2 Ion chromatography (IC) can quantify major ions in cement at sub-ppm levels in under 15 minutes — a fraction of the time required by traditional wet-chemical methods that often take several hours or even days. 1.…

Inductively Coupled Plasma Optical Emission Spectrometry for Rare Earth Element Analysis — Principles, Methods, and Engineering Applications 1. Scope and Application of ISO 29582-1 ISO 29582-1 specifies an inductively coupled plasma optical emission spectrometry (ICP-OES) method for the determination of…

Inductively Coupled Plasma Mass Spectrometry for Ultra-Trace Rare Earth Element Analysis — Methodology, Interference Control, and Applications 1. Scope and Principles of ISO 29582-2 ISO 29582-2 specifies an inductively coupled plasma mass spectrometry (ICP-MS) method for the determination of rare…

Standardized Mechanical Testing of Solid Timber, Glulam, CLT, and LVL — Bending Strength, Modulus of Elasticity, and Characteristic Value Determination 1. Overview and Scope of ISO 29584 ISO 29584 specifies the testing methods for structural timber products used in load-bearing…

A structured framework for information exchange and collaboration in BIM-enabled construction projects 1. The Role of ISO 29481-2 in BIM Ecosystems ISO 29481-2 establishes a comprehensive framework for managing information exchange throughout the lifecycle of a building or infrastructure project.…

The formal data schema specification for model view definitions and exchange requirements in BIM workflows 1. The Data Schema Layer of BIM Standards ISO 29481-3 defines the formal data schema for representing the components of the BIM collaboration framework specified…

Standardised determination of carbon, hydrogen, nitrogen, sulphur and oxygen content in coal, coke and solid biofuels 1. The Importance of Ultimate Analysis in Fuel Characterisation ISO 29541 specifies the instrumental methods for determining the carbon, hydrogen, nitrogen, sulphur, and oxygen…

Standardised XRF spectrometry procedures for the determination of major and minor oxides in cement and clinker 1. XRF in the Cement Industry: Principles and Standards ISO 29581-1 specifies the X-ray fluorescence (XRF) spectrometric method for the chemical analysis of cement,…

Accelerated environmental testing for insulation dimensional performance Purpose and Scope of ISO 29472 ISO 29472:2008 specifies a method for determining the dimensional stability of thermal insulating products when exposed to specified temperature and humidity conditions — typically more severe than…

Applying GUM methodology to fire testing: measurement uncertainty principles for fire safety engineering Introduction to Measurement Uncertainty in Fire Testing ISO 29473:2010 provides a framework for evaluating and expressing measurement uncertainty in fire test methods developed by ISO/TC 92, based…