Architectural Analysis of the WANDevice v2 Root Device in the UPnP Internet Gateway Device Framework Introduction to WANDevice v2 ISO/IEC 29341-26-16 defines the WANDevice v2 root device, the top-level UPnP device template for the WAN side of an Internet Gateway…

Extensive technical guide to the WANIPConnection:1 service, covering NAT traversal, dynamic port mapping, connection state machine, and advanced engineering patterns for UPnP IGD. Introduction to WANIPConnection:1 The ISO/IEC 29341-26-10 standard defines the WANIPConnection:1 service, the most widely used UPnP service…

Technical Deep Dive into the UPnP WANIPConnection v2 Service for IPv4/IPv6 Internet Gateway Devices Introduction to WANIPConnection v2 ISO/IEC 29341-26-11 defines the WANIPConnection v2 service, a core UPnP component within the Internet Gateway Device (IGD) architecture. This service standardizes the…

Technical Reference for the WANPPPConnection Service in UPnP Internet Gateway Devices Understanding the WANPPPConnection Service ISO/IEC 29341-26-12 specifies the WANPPPConnection service, a specialized UPnP service designed for WAN interfaces that use Point-to-Point Protocol (PPP) for link establishment. This standard is…

Multi-speed fan control, speed ratio management, and auto-mode logic for HVAC systems ISO/IEC 29341-24-11 defines the Fan Speed service within the UPnP HVAC device architecture. This service provides standardized control over fan operations in HVAC systems, supporting multiple speed levels,…

A comprehensive guide to the HVAC device template for home and building automation ISO/IEC 29341-24-1 defines the UPnP device template for Heating, Ventilation, and Air Conditioning (HVAC) systems within the UPnP Device Architecture framework. As part of the ISO/IEC 29341…

Accurate temperature measurement, multi-sensor aggregation, and calibration for UPnP networks ISO/IEC 29341-24-2 defines the Temperature Sensor service, a fundamental component of the UPnP HVAC device architecture. This service provides standardized temperature measurement capabilities that feed data to the thermostat service…

System diagnostics, configuration management, and operational status monitoring for HVAC networks ISO/IEC 29341-24-3 defines the HVAC Device Management service, which provides system-level diagnostics, configuration management, and operational status monitoring for UPnP HVAC devices. While the thermostat service (ISO/IEC 29341-24-10) and…

ISO/IEC 29341-20-3 — Telephony — Setup Service Standard for Universal Plug and Play Introduction to UPnP Telephony Setup Service The ISO/IEC 29341-20-3 standard defines the UPnP Telephony Setup service, which provides a standardized mechanism for initial provisioning and configuration of…

UPnP AV Architecture — Comprehensive Media Content Serving for Home Networks Introduction to MediaServer v2 Device Template The ISO/IEC 29341-20-4 standard defines the UPnP AV MediaServer v2 device template, a comprehensive specification for devices that provide media content to UPnP…

Setpoint management, scheduling, and multi-mode control for smart thermostats ISO/IEC 29341-24-10 specifies the Thermostat service as part of the UPnP HVAC device framework. This service defines the actions, state variables, and eventing mechanisms required for intelligent temperature control in residential…

ISO/IEC 29341-20-13 — Telephony — Device Service Standard for Universal Plug and Play Introduction to UPnP Telephony Device Service The ISO/IEC 29341-20-13 standard defines the UPnP Telephony Device service, which provides a device-level abstraction for telephony-capable hardware in a UPnP…

ISO/IEC 29341-20-14 — Telephony — Media Service Standard for Universal Plug and Play Introduction to UPnP Telephony Media Service The ISO/IEC 29341-20-14 standard specifies the UPnP Telephony Media service, which manages the media aspects of telephony sessions in a UPnP…

IEC 29341-20-1 | UPnP Telephony | Call Control Architecture UPnP Telephony Device Architecture IEC 29341-20-1 defines the UPnP Telephony device, a standardised framework for integrating telephony capabilities into the UPnP home network environment. This specification enables fixed-line phones, mobile handsets,…

ISO/IEC 29341-20-2 — Telephony — Architecture Standard for Universal Plug and Play Introduction to UPnP Telephony Architecture The ISO/IEC 29341-20-2 standard defines the overarching architecture for UPnP Telephony, establishing the framework within which all other telephony services (Call, Message, Device,…

IEC 29341-20-10 | UPnP Telephony Service | CallControl Service Template The CallControl Service Specification IEC 29341-20-10 defines the CallControl service, the mandatory service template for UPnP Telephony devices. This service-level standard specifies the complete interface for managing telephony calls: initiating…

ISO/IEC 29341-20-11 — Telephony — Call Service Standard for Universal Plug and Play Introduction to UPnP Telephony Call Service The ISO/IEC 29341-20-11 standard defines the UPnP Telephony Call service, a core component of the UPnP Telephony architecture that enables call…