A comprehensive standard for formalizing diagnostic knowledge and AI service interfaces in system test environments IEC 62243, developed jointly as IEEE Std 1232, defines the Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE). This standard provides a…

Performance requirements and test methods for fixed radiation detection equipment at borders, ports, and facilities IEC 62244, published in 2006, specifies the performance requirements and test methods for installed radiation monitors designed to detect the presence of radioactive materials. These…

Fundamentals of EMC management for railway systems: from emission limits to system-wide immunity requirements IEC 62236-1 (Edition 3.0, 2018) is the foundational document of the IEC 62236 series, which addresses electromagnetic compatibility (EMC) in railway applications. This standard sets the…

Live Working — Safety Requirements, Dielectric Testing, and Engineering Best Practices Scope and Application of IEC 62237 IEC 62237 (First edition, 2003) specifies requirements for insulating hoses with fittings used in live working applications with hydraulic tools and equipment. These…

Maritime Navigation and Radiocommunication — Testing Methods and Performance Requirements Scope and Importance of IEC 62238 IEC 62238 (First edition, 2003) defines the methods of testing and required test results for VHF radiotelephone equipment incorporating Class D Digital Selective Calling…

This Technical Specification is part of the IEC 62239 series on process management for avionics, focusing on the preparation and maintenance of management plans for electronic Commercial Off-The-Shelf (COTS) assemblies used in airborne systems. Introduction to COTS Assembly Management in…

IEC 62232 (Edition 2.0, 2017) provides standardized methods for the determination of radio frequency (RF) field strength, power density, and specific absorption rate (SAR) in the vicinity of radiocommunication base stations. Its primary purpose is to evaluate human exposure to…

IEC 62233 (2005) specifies measurement methods for electromagnetic fields (EMF) generated by household appliances and similar electrical equipment in the frequency range up to 400 kHz. It covers both electric and magnetic field measurements, providing standardized test conditions, measurement distances,…

IEC TR 62235 (Technical Report, Edition 1.0, 2005) provides guidance on instrumentation and control (I&C) systems important to safety for nuclear fuel and waste storage facilities. It covers both interim storage (temporary, designed for decades) and final repositories (permanent, designed…

IEC TS 62228 (First Edition, 2007) is a Technical Specification that defines comprehensive test and measurement methods for the electromagnetic compatibility (EMC) evaluation of CAN (Controller Area Network) transceivers. Developed by IEC Subcommittee 47A (Integrated Circuits), this specification is essential…

IEC TS 62229 (Edition 2.0, 2017) is a Technical Specification that describes a comprehensive conceptual model for multimedia e-publishing and e-books. Developed by IEC Technical Committee TC 100 (Audio, Video and Multimedia Systems and Equipment), this specification provides the essential…

IEC 62230 (Edition 1.1, 2013) defines the spark-test method — also known as the sparker test — for detecting insulation defects in electric cables during the manufacturing process. It is a high-voltage online test that rapidly identifies pinholes, cracks, or…

IEC 62231-1 (Edition 1.0, 2015) specifies the dimensional, mechanical, and electrical characteristics of composite station post insulators for use in AC substations with voltages greater than 1000 V up to 245 kV. These insulators consist of a resin-impregnated fiberglass core…

IEC TR 62225 (First Edition, 2001) is a technical report providing harmonized guidance on terminology used in the field of connectors and mechanical structures for electronic equipment. Prepared by IEC Technical Committee TC 48 (Electromechanical Components and Mechanical Structures for…

IEC 62226-1 (First Edition, 2004) is an International Standard that provides methods for calculating the current density and internal electric field induced in the human body when exposed to low and intermediate frequency electric and magnetic fields (up to 100…

Permission Code Framework for Digital Content Distribution in Home Networks Permission Code Architecture and Framework IEC 62227 defines a digital rights permission code — a compact, structured set of permission information designed for multimedia home server systems. First published in…

Integrated Circuits – EMC Evaluation of Transceivers for Controller Area Network (CAN) EMC Testing Framework for CAN Transceivers IEC 62228-1 (first edition, 2018) establishes the general conditions and definitions for electromagnetic compatibility (EMC) evaluation of integrated circuit transceivers used in…