💡 Scope: IEC 62298-1-2005 introduces the TeleWeb standard, which defines a complete system for delivering web-based content and interactive applications via broadcast television channels, enabling TV receivers to display HTML pages, forms, and multimedia content without requiring a bidirectional internet…

High-Speed Optical Digital Interface for Consumer AV Equipment Using POF Technology Scope and System Architecture IEC 62300, published in 2004, specifies the principal electrical and optical parameters for a consumer audio/video equipment digital interface that uses plastic optical fibre (POF).…

💡 Scope: IEC 62290-2-2014 specifies the functional requirements for Urban Guided Transport Management and Command/Control Systems (UGTMS), covering all automation grades from GoA0 (manual) to GoA4 (unattended train operation) for metro, light rail, and automated people mover systems. 1. 🏗️…

💡 Scope: IEC TR 62291-2009 is a Technical Report that describes the file format and data structure for DVD-Video Recording (DVD-VR), the standard format used by DVD recorders and DVD streamers for real-time video recording on rewritable and recordable DVD…

💡 Scope: IEC 62295-2007 specifies a multimedia communication protocol that enables seamless interconnectivity between heterogeneous home networking technologies, including Ethernet (IEEE 802.3), IEEE 1394 (FireWire), USB, and wireless LAN (IEEE 802.11), for audio/video streaming and control. 1. 🔗 Bridging the…

IEC 62286-2003 specifies the Service Diagnostic Interface (SDI) for consumer electronics products and networks, implemented over IEEE 1394 (FireWire). Developed by IEC Technical Committee 100 (Audio, video and multimedia systems and equipment), this standard addresses the growing complexity of consumer…

IEC 62287-2-2017 specifies the operational and performance requirements for Class B shipborne Automatic Identification System (AIS) equipment employing Self-Organizing Time Division Multiple Access (SOTDMA) techniques. Developed by IEC Technical Committee 80 (Maritime navigation and radiocommunication equipment and systems), this standard…

💡 Scope: IEC 62288-2014 specifies the requirements for the presentation of navigation-related information on shipborne navigational displays, covering radar, ECDIS, and integrated bridge systems to ensure consistent, unambiguous information presentation in accordance with IMO performance standards. 1. 🗺️ Standardization of…

💡 Scope: IEC 62289-2002 defines the D-9 (also known as Digital-S) professional digital video cassette recording format, using 12.65 mm (1/2-inch) magnetic tape with 4:2:2 component digital compression, designed for broadcast and professional video production applications. 1. 🎬 The D-9…

IEC 62282-3-300-2012 establishes minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems. Published by IEC Technical Committee 105 (Fuel cell technologies), this standard specifically addresses the conditions created by the installation process that can…

IEC TR 62283-2010 is a technical report that provides comprehensive guidance for performing nuclear radiation tests on optical fibres. Published by IEC Subcommittee 86A (Fibres and cables), this document serves as a companion to IEC 60793-1-54 (gamma irradiation test method),…

IEC TR 62284-2003 is a technical report that provides standardized guidance for measuring the effective area (Aeff) of single-mode optical fibres. As fibre optic communication systems push toward higher optical powers for dense wavelength division multiplexing (DWDM) and long-haul transmission,…

IEC TR 62285-2005 provides standardized guidance for measuring the non-linear coefficient (γ, also expressed as n₂/Aeff) of single-mode optical fibres. As optical communication systems evolve toward higher launch powers and longer repeaterless spans, fibre nonlinearity becomes the dominant limiting factor…

IEC 62279:2015 — Communication, signalling and processing systems: software for railway control and protection systems Introduction to IEC 62279: Software for Railway Control and Protection IEC 62279:2015 (Edition 2.0) specifies the requirements for software used in railway communication, signalling, and…

IEC 62280-1-2002, part of the railway applications standards family, defines the fundamental requirements for achieving safety-related communication over closed transmission systems. Published by the International Electrotechnical Commission (IEC) under Technical Committee 9 (Electrical equipment and systems for railways), this standard…

IEC 62281-2016 specifies test methods and safety requirements for lithium metal and lithium-ion cells and batteries during transport. As the global demand for portable energy storage surges — powering everything from smartphones to electric vehicles — ensuring the safe transport…

Ensuring Patient Safety Through Robust Treatment Verification and Data Integrity 1. Scope and System Requirements for Radiotherapy RVS IEC 62274 is the international safety standard for Radiotherapy Record and Verify Systems (RVS), defined as Programmable Electrical Medical Systems (PEMS) or…