Standard: IEC TS 62997:2017 | Edition 1.0 | TC 27: Industrial Electroheating and Electromagnetic Processing | Published: June 2017 📘 Scope: This Technical Specification provides methods for evaluating hazards caused by magnetic nearfields from industrial electroheating (EH) and electromagnetic processing…

Standard: IEC 62999:2016 | Edition 1.0 | TC 59/SC 59C: Heating Appliances | Published: February 2016 📘 Scope: This International Standard applies to electrical underfloor heating in dwellings and similar buildings with a maximum load-bearing capacity of 4 kN/m². It…

Published: July 2017 | Edition: 1.0 | Category: Technical Specification | TC 109: Insulation Coordination for Low-Voltage Equipment 💡 Key Insight: IEC TS 62993 fills a critical gap in the IEC 60664 series by extending insulation coordination guidance to the…

Standard: IEC 62995:2018 | Edition 1.0 | TC 9: Electrical Equipment and Systems for Railways | Published: May 2018 📘 Scope: This International Standard specifies rules for the installation of cabling on board railway rolling stock, covering cable selection, sizing,…

Standard: IEC TS 62996:2017 | Edition 1.0 | TC 27: Industrial Electroheating and Electromagnetic Processing | Published: September 2017 📘 Scope: This Technical Specification addresses safety assessments in the frequency range 1 kHz to 6 MHz for industrial electroheating (EH)…

Published: September 2017 | Edition: 1.0 | Category: International Standard | SC 23H: Industrial and EV Plugs and Socket-Outlets 💡 Key Insight: IEC 62986 standardizes the globally recognized locking-type plugs and connectors with arcuate contacts (commonly known as NEMA twist-lock…

Published: September 2015 | Edition: 1.0 | Category: Technical Report | SC 45A: Instrumentation and Control of Nuclear Facilities 💡 Key Insight: This technical report investigates whether FMEA methodology for nuclear I&C systems is ready for formal standardization. The conclusion…

Published: May 2018 | Edition: 1.0 | Category: International Standard | SC 45A: Instrumentation and Control of Nuclear Facilities 💡 Key Insight: IEC 62988 represents a landmark standard as it is the first international standard to address the use of…

Published: March 2018 | Edition: 1.0 | Category: Technical Specification | TC 82: Solar Photovoltaic Energy Systems 💡 Key Insight: IEC TS 62989 is the first international specification dedicated to primary optics for CPV systems, addressing a critical gap where…

Evaluation of optical performance and angular colour shift for modern display technologies Introduction to IEC TS 62977-3-1:2019 IEC TS 62977-3-1:2019, part of the IEC 62977 series on electronic displays, provides a standardized methodology for evaluating the viewing direction dependence of…

Published: September 2017 | Edition: 1.0 | Category: Technical Report | TC 115: HVDC Transmission for DC Voltages Above 100 kV 💡 Key Insight: IEC TR 62978 is the first international standard framework to provide comprehensive asset management guidelines specifically…

Published: August 2017 | Edition: 1.0 | Category: International Standard | TC 82: Solar Photovoltaic Energy Systems 💡 Key Insight: Thermal runaway in bypass diodes is a critical failure mechanism unique to Schottky barrier diodes used in PV modules. As…

Published: May 2017 | Edition: 1.0 | Category: Technical Report | TC 68: Magnetic Alloys and Steels 💡 Key Insight: This technical report reveals that the relationship between Single Sheet Tester (SST) and Epstein frame measurements is not a simple…

Performance requirements and test methods for OLED panels and modules used in general lighting applications IEC TS 62972, published in July 2016 by IEC Technical Committee 34 (Lamps and Related Equipment), establishes performance requirements and test methods for organic light…

Requirements and test methods for secondary batteries used in railway rolling stock auxiliary power systems IEC 62973-1, published in 2018 by IEC Technical Committee 9 (Electrical Equipment and Systems for Railways), specifies requirements and test methods for secondary batteries installed…

Device requirements for data collection, gathering, and analysis in predictive maintenance Introduction to IEC 62974-1:2017 IEC 62974-1:2017, formally titled “Monitoring and measuring systems used for data collection, gathering and analysis — Part 1: Device requirements,” establishes the fundamental specifications for…

Performance requirements and test methods for high-energy X-ray linac NDT systems Introduction to IEC 62976:2017 IEC 62976:2017, titled “Industrial non-destructive testing equipment — Electron linear accelerator,” defines the performance requirements and test methods for electron linear accelerators (linacs) used in…