🔥 Test Method Overview and Scope This standard, designated jointly by ASTM International as D1322 −24 and the Energy Institute (EI) as IP 598/23, defines the two established procedures for determining the smoke point of kerosene and aviation turbine fuels.…

📌 Scope and Significance of Modified Wood This specification, formally designated as ASTM D 1324 – 83 (Reapproved 1993) e1, defines the material known as Modified Wood. An editorial note adding Section 14 was made in October 1993, indicated by…

ASTM D1318-23 provides a standardized method for the quantitative determination of sodium in residual fuel oil using flame photometry. This test is crucial for quality control and operational safety in industrial combustion systems. 🎯 Scope and Significance This test method…

The ASTM D1319-20a standard, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, provides an established procedure for determining the volume percent of total aromatics, total olefins, and total saturates. It is widely used for…

ASTM D1321-24 is a standardized test method for assessing the consistency of petroleum waxes through needle penetration. This method is crucial for quality control in wax production and applications such as coatings and candles. 📐 Scope and Summary of Test…

🧪 Overview and Scope of D1312-93 ASTM D1312-93 (Reapproved 1998) provides standardized procedures for measuring the concentration of apparent free phenol in synthetic phenolic resins or solutions formulated for coating applications. It delineates two distinct analytical approaches based on phenol…

📐 Test Method Overview and Scope This test method, designated D1316 – 20, describes the procedure for determining the fineness of grind of printing inks using an NPIRI Grindometer. It evaluates the size of the largest particles in a finished…

🧪 Overview of the Spot and Immersion Test Methods ASTM D1308 – 20 defines standardized procedures for evaluating the resistance of clear and pigmented organic coating systems to common household chemicals. The standard is built around three distinct exposure methods,…

📐 Test Apparatus and Specifications This test method, designated as D1309-93 (Reapproved 2015), simulates pigment settling that traffic paints may experience during storage. The following apparatus is required: 🟦 Component 📏 Specification Container 500 mL (1 pt) friction top can,…

ASTM D1310-14 (Reapproved 2021) specifies a precise laboratory procedure for determining the flash point and fire point of liquids using the Tag Open-Cup apparatus. This test method is fundamental for the safety classification and quality control of liquids, including solvents,…

📐 Overview and Scope of D1305-16 ASTM D1305-16 (Reapproved 2022) establishes the standard specification for electrical grade unsized, unbleached sulfate (Kraft) paper and paperboard intended for use as layer insulation in electrical apparatus such as coils and transformers. The scope…

This article provides a comprehensive overview of ASTM D1306-88 (Reapproved 1996), the Standard Test Method for the Gravimetric Determination of Phthalic Anhydride Content in Alkyd Resins and Esters Containing Other Dibasic Acids. This method is essential for quality control in…

📜 Scope and Significance of D1301-91 ASTM D1301-91 (Reapproved 2020) covers standardized test methods for the chemical analysis of basic carbonate white lead and basic sulfate white lead pigments. Developed under the jurisdiction of ASTM Committee D01 on Paint and…

ASTM D1304-99 (Reapproved 2020) provides a comprehensive suite of test methods for evaluating adhesives relative to their use as electrical insulation. The standard covers procedures for adhesives in liquid, highly viscous, solid, or set states, targeting materials intended for curing…

ASTM D1298-12 (Reapproved 2017)¹, also designated as API MPMS Chapter 9.1, defines the standard hydrometer method for the laboratory determination of density, relative density, or API gravity of crude petroleum and liquid petroleum products. This procedure relies on a glass…

📜 Scope and Classification of Turpentine ASTM D13-02 specifies the requirements for spirits of turpentine as defined by the Code of Federal Regulations (Title 7, Part 160) and Terminology D 804. The standard covers four distinct kinds of turpentine, which…

🛢️ Overview and Applicable Products ASTM D130-19 is a standard test method for determining the corrosiveness to copper of a wide range of petroleum products. It is also recognized as Federation of Societies for Paint Technology Standard No. Dt-28-65 and…