📐 Scope and Referenced Documents This standard, designated D3787 – 16 (Reapproved 2020), specifically covers the measurement of bursting strength for textiles and garments that exhibit a high degree of ultimate elongation using a Constant-Rate-of-Traverse (CRT) ball burst strength tester.…

ASTM D3790-24 defines the standard procedure for determining the volatile matter (moisture) content in all types of leather. This determination is critical for reporting the results of other chemical tests on a moisture-free basis. 📐 Scope, Significance, and Required Apparatus…

📜 Scope and Material Applicability ASTM D3785-20 defines the standard performance specification for woven necktie and scarf fabrics. It applies to fabrics made from any textile fiber or mixture of textile fibers (Section 1.1). The requirements apply to both the…

📐 Scope and Key Terminology This test method (D3786/D3786M −18 (Reapproved 2023)) describes the measurement of the bursting strength of textile fabrics using a hydraulic or pneumatic diaphragm bursting tester. It is generally applicable to a wide variety of textile…

ASTM D3783-02 establishes the minimum performance criteria for woven flat lining fabrics intended for use in men’s and boys’ apparel. This specification covers linings composed of any textile fiber or fiber blend, providing manufacturers, retailers, and quality assurance labs with…

The ASTM D3784-02 standard, issued under the fixed designation D 3784, establishes the required performance characteristics for men’s and boys’ woven bathrobe and dressing gown fabrics. Under the jurisdiction of ASTM Committee D13 on Textiles (Subcommittee D13.61 on Apparel), this…

🔍 Scope and Terminology ASTM D3781-02 specifies performance requirements for men’s and boys’ knitted rainwear and all-purpose water-repellent coat fabrics. It covers fabrics made from any textile fiber or mixture, but it is not applicable to interlinings. The standard defines…

📜 Scope and Application ASTM D3782-22 establishes the performance criteria for men’s and boys’ knitted dress suit fabrics and knitted fabrics intended for sportswear jackets, slacks, and trousers. This specification applies to fabrics composed of any textile fiber or blend,…

📐 Specimen Geometry and Types The test methods under D378-24 require precise specimen preparation from the conveyor belt. For heavy duty belts (tension ≥160 PIW), specimens are taken from both the carcass and cover layers. Light duty belts (

📜 Scope and Document Structure of D3780-22 ASTM D3780-22, titled Standard Performance Specification for Men’s and Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics, establishes the minimum performance requirements for these garment categories. Approved on…

📋 Scope and Application This performance specification covers women’s and girls’ woven rainwear and all-purpose water-repellent coat outer fabrics composed of any textile fiber or mixture of textile fibers. It is not applicable to woven fabrics used for linings and…

ASTM D3777 – 97 (Reapproved 2002) provides a comprehensive framework for drafting rigorous and technically sound specifications for textile products. The scope (Section 1.1) explicitly covers general methods for specifying textile product characteristics that may be measured or counted. This…

🧥 Scope and Key Definitions ASTM D3778-95a establishes performance criteria for woven outer fabrics used in women’s and girls’ dry-cleanable dress coats. Under the jurisdiction of ASTM Committee D13.56, this specification covers any textile fiber or mixture of fibers intended…

🧵 Overview and Scope of D3775 ASTM D3775 – 17 (Reapproved 2023) provides a standardized procedure for determining the end (warp) and pick (filling) count of woven fabrics. This test method is applicable to all types of woven fabric constructions…

ASTM D3776/D3776M-20 provides standardized test methods for measuring fabric mass per unit area, commonly referred to as fabric weight. These methods are applicable to most fabrics and include four approved options to accommodate various fabric forms and testing scenarios. 📐…

📏 Overview and Scope of D3773/D3773M ASTM D3773/D3773M provides standardized test methods for determining the length of woven fabric. The standard is applicable to full rolls or bolts of material and is essential for commercial transactions and quality assurance. It…

📐 Scope, Terminology, and Significance The ASTM D3774-18 standard, reapproved in 2024, provides a definitive test method for measuring the width of woven and knitted textile fabrics. Under the jurisdiction of Subcommittee D13.60, the method specifically addresses the measurement of…