📜 Scope, Significance, and Key Substrates ASTM D3805/D3805M −16 (Reapproved 2023) provides a standardized guide for the application of aluminum-pigmented asphalt roof coatings. This guide is specifically written for products conforming to ASTM D2824/D2824M (Aluminum-Pigmented Asphalt Roof Coatings, Non-fibered, and…

📐 Scope and Terminology This test method, designated D3802‑23, provides a procedure for determining the ball‑pan hardness number of granular activated carbons. It is applicable to carbons where 90 % of particles exceed 80 mesh (180 µm) as per Test…

🎯 Scope and Significance ASTM D3803 −91 (Reapproved 2022) defines a highly stringent procedure for evaluating the capability of nuclear-grade activated carbon to remove radio-labeled methyl iodide from air and gas streams. The test method is designed for dual application:…

The density of high-modulus fibers is a critical property influencing the specific mechanical performance of composite materials. ASTM D3800M-11 provides two standardized procedures to determine this property. This standard is under the jurisdiction of ASTM Committee D30 on Composite Materials…

📐 Specimen Geometry and Test Setup This fire-test-response standard defines a small-scale laboratory procedure for determining the comparative burning characteristics of solid plastics in a vertical position. A 20-mm (50W) premixed flame is applied to the base of the specimen,…

📐 Scope and Standard Overview Designation D3800-22, officially titled “Standard Test Method for Density of High-Modulus Fibers,” is a critical standard under the jurisdiction of ASTM Committee D30 on Composite Materials. It provides standardized procedures for determining the density of…

📏 Scope and Applicable Materials ASTM D38-94 (Reapproved 2000) establishes standardized test methods for sampling wood preservatives prior to laboratory testing. The methods are specifically designed for creosote, creosote-coal tar solutions, creosote-petroleum solutions, as well as oilborne and waterborne preservatives.…

ASTM D380-94 (Reapproved 2020) is a standard test method for rubber hose, approved for use by the U.S. Department of Defense. It covers inspection and testing of all types and constructions of rubber hose. The values stated in SI units…

ASTM D3798-03, formally titled Standard Test Method for Analysis of p-Xylene by Gas Chromatography, defines a rigorous protocol for determining the hydrocarbon impurity profile and calculating the chromatographic purity of high-grade p-xylene. Developed under the jurisdiction of ASTM Committee D16,…

🔬 Scope and Summary of the Freezing Point Method ASTM D3799-95 provides a standardized procedure for determining the purity of styrene, expressed as a weight percent. As stated in Section 1.1, all detectable impurities encountered during analysis are systematically treated…

📐 Scope and Applicability ASTM D3796-09 (Reapproved 2024) defines the standard practice for the calibration of Type S pitot tubes. This practice is specifically applicable to the determination of Type S pitot coefficients within the gas velocity range of 305…

🔬 Scope and Applicability of D3797-05 ASTM D3797-05 specifies a standard gas chromatographic test method for analyzing the purity of o-xylene and quantifying its normally occurring impurities. The impurities covered in this test method include nonaromatic hydrocarbons, benzene, toluene, p–…

🔍 Scope and Purpose of D3795-20 ASTM D3795-20 specifies a standardized methodology for determining the thermal flow, cure, and behavior properties of pourable thermosetting materials using a torque rheometer. The test method is employed as a critical tool for development,…

🧪 Test Overview and Scope ASTM D3793-06, formally titled the “Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement,” provides a comparative procedure for evaluating the film-formation ability of latex paints. The method specifically measures the…

🎯 Scope and Application of D3794-22 ASTM D3794-22, the Standard Guide for Testing Coil Coatings, provides a consolidated framework for evaluating the performance of organic coatings applied to metal coils prior to fabrication. This standard is essential for the pre-painted…

📐 Scope and Significance of Heat Evaluation ASTM D3791 / D3791M provides a standardized procedure for evaluating the effects of heat on asphalts when they are maintained at elevated temperatures in the presence of little or no air. The practice…

ASTM D3792 – 16 (Reapproved 2022) establishes a direct injection gas chromatographic (GC) method for determining the total water content in waterborne paints. This test method is a critical tool for calculating Volatile Organic Content (VOC) and has been evaluated…