Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
D3678-19 – Standard Test Method Technical Guide
The ASTM D3678-19 standard establishes requirements for rigid poly(vinyl chloride) (PVC) interior-profile extrusions, focusing on material properties, dimensional stability, and extrusion quality for interior building products. It excludes cellular products, piping, tubing, and window/door profiles. Recycled PVC is permitted in accordance with Sections 6 and 7. The standard values are stated in SI units as the primary standard.
📐 Scope and Classification
This specification covers rigid PVC interior-profile extrusions for interior applications. It establishes material property requirements, including dimensional stability and extrusion quality, and provides methods for identifying compliant extrusions. Classification is based on compound types per Specification D1784. The standard is intended for producers, distributors, and users to ensure consistent quality in finished building products.
⚙️ Test Methods and Material Properties
The standard references specific test methods to verify material performance. These include conditioning, thermal expansion measurement, and dimensional change assessments. The following table summarizes key test methods integrated into the specification:
| 🟦 Test Method | 📏 Description | 🎯 Application |
|---|---|---|
| D618 | Practice for Conditioning Plastics for Testing | Standard conditioning before mechanical tests |
| D696 | Test Method for Coefficient of Linear Thermal Expansion | Measures expansion between -30°C and 30°C |
| D1042 | Test Method for Linear Dimensional Changes | Assesses changes from heat and moisture exposure |
| D1784 | Specification for PVC Compounds | Defines compound requirements for compliance |
| D3892 | Practice for Packaging/Packing of Plastics | Guidelines for packaging extrusions |
💡 SI units are the standard throughout this specification. Values shown in parentheses are for informational purposes only. All compliance testing should follow SI unit requirements.
⚠️ The test method portion (Section 8) does not address all safety concerns. Users must establish appropriate safety, health, and environmental practices prior to use.
❓ Frequently Asked Questions
🔍 What is the scope of D3678-19? It specifies requirements for rigid PVC interior-profile extrusions, including material properties, dimensional stability, and extrusion quality for interior building products.
💡 Can recycled PVC be used? Yes, recycled PVC is permitted in accordance with Sections 6 and 7 of the standard.
⚡ What test methods are referenced? Key methods include D618 for conditioning, D696 for thermal expansion, and D1042 for dimensional changes.
📌 How does D3678-19 relate to D4726? D4726 covers exterior profile extrusions for windows and doors, while D3678 focuses on interior applications.