Category SAE Standards

Standard Scope and Initial Checks The SAE J2032-2023 standard specifies general requirements and test methods for non-shielded, high-voltage ignition cable assemblies used in road vehicles. It covers everything from visual examination to dielectric endurance. Visual Examination 🔍 All assemblies must…

The SAE J2022 standard has been revised in 2024 to clarify classifications and update terminology for horizontal earthboring machines. This standard provides essential definitions for machine types, dimensional terms, and performance specifications used in the trenchless industry. By encouraging common…

SAE J2024 is an information report that establishes a minimum level of uniform recipes for contaminants used in durability testing of air brake components and auxiliary pneumatic devices for trucks and buses. This standard provides test engineers with proven formulations…

The SAE J2012-2016 standard defines the framework and standardized set of Diagnostic Trouble Codes (DTCs) used in On-Board Diagnostic (OBD) systems for passenger cars and light/medium duty trucks. Technically equivalent to ISO 15031-6, this recommended practice ensures uniform diagnostic communication…

Overview of SAE J2013-2022 The SAE J2013-2022 standard, titled “Military Tire Glossary,” is a recommended practice that provides a comprehensive set of terms and definitions tailored for military tire applications. Developed as a supplement to SAE J2014, this glossary ensures…

The SAE J2014-2022 standard establishes test methods and evaluation criteria for pneumatic tire, wheel, and runflat assemblies used on military tactical wheeled vehicles. Issued by SAE International and updated in July 2022, it serves as a guide for all branches…

Overview and Scope SAE J2002, officially titled “Internal Combustion Engines—Piston Rings—Oil Control Rings,” specifies the dimensional features of four oil control ring types: S (slotted), G (double bevelled), D (bevelled edge), and DV (bevelled edge V-groove). These rings are intended…

This article summarizes the key provisions of SAE J2005-2018, a recommended practice for evaluating whether recreational motorboats are equipped with effective exhaust muffling when operating in stationary mode. The procedure is widely used by regulatory agencies, marine muffler manufacturers, and…

SAE J201, a recommended practice for in-service brake performance testing of passenger cars and light-duty trucks, was officially cancelled in July 2013 without replacement. This article explains the background, reasons for cancellation, and what engineers should consider when referencing brake…

SAE J20-2022 defines the requirements for reinforced and flexible hoses intended for water and ethylene glycol-based engine-coolant systems. This widely adopted standard ensures reliability and performance across passenger vehicles, heavy-duty trucks, and off-highway equipment. Properly interpreting hose types, material classes,…

SAE J200-2023, jointly developed with ASTM D2000, provides a standardized classification system for vulcanized rubber materials used in automotive applications. It defines materials by two primary characteristics: type (heat aging resistance) and class (oil swelling resistance). This system allows engineers…

SAE J1994-2020 provides recommended practices for laboratory testing of heat exchangers used in vehicle and industrial cooling systems. This article outlines the essential requirements for setting up tests, measuring temperature and pressure, ensuring data quality, and avoiding common errors. 🛠️…