Category SAE Standards

SAE J2566-2023 establishes uniform requirements and guidelines for displaying capacity information on personal watercraft. This recommended practice covers the marking of rated persons capacity, ensuring it is legible, visible to the operator when underway, and durable against environmental exposure. It…

The SAE J2567-2021 standard defines a repeatable and accurate method for measuring exhaust sound levels of stationary snowmobiles. It is designed to support compliance evaluations and noise control enforcement. This article provides a technical overview of the instrumentation, test site,…

SAE J2570-2019 establishes minimum performance specifications for sensors (transducers) used within anthropomorphic test devices (ATDs) during impact testing per SAE J211. The standard aims to promote uniformity in measurements, enabling meaningful comparisons of test results from different laboratories. It covers…

SAE J2560-2019 is the latest revision of the SAE Recommended Practice that defines performance requirements and test methods for replaceable halogen light sources used in motor vehicle forward lighting. This standard covers light sources for headlamps, fog lamps, and adaptive…

1. Overview and Scope The SAE J2562 (revised July 2021) recommended practice specifies uniform laboratory procedures for biaxial fatigue testing of wheels intended for passenger cars, light trucks, and temporary use. This test method applies combined radial and lateral loads…

In fluid power systems, the performance and reliability of tube assemblies directly affect safety, efficiency, and maintainability. SAE J2551-2 (2018) provides recommended practices for carbon, alloy, and high strength low alloy (HSLA) steel tubing used in fluid power and general…

SAE J2552 is a stabilized standard that defines dimensional and performance requirements for low-pressure, field-attachable push-on hoses and their mating barb-type fittings. Developed by the SAE Hydraulic Hose and Hose Fittings Committee, this standard covers applications with petroleum-base hydraulic fluids,…

Idle gear rattle is a common NVH concern in vehicles equipped with manual transmissions. This metallic tapping sound typically occurs when the vehicle is parked with the engine idling, transmission in neutral, and the clutch engaged. The SAE J2555-2017 standard…

⚠️ Cancellation Notice: SAE J2551 was cancelled in September 2013 and replaced by a three-part series. The original SAE J2551 Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications has been superseded. In 2013, SAE cancelled this standard…

SAE J2551-1-2018 provides comprehensive guidelines for designing and fabricating carbon, alloy, and high strength low alloy (HSLA) steel tube assemblies used in fluid power and general applications. This recommended practice helps engineers and fabricators ensure safety, performance, and global standardization.…