Category SAE Standards

SAE J384 is a stabilized recommended practice that specifies performance requirements and test procedures for the strength and location of seat belt assembly anchorages. This standard applies to anchorages attached to vehicle body structure or seat assemblies and is essential…

This standard establishes essential criteria for pelvic restraint systems—including seat belts, anchorages, and fastening elements—used in off-road work machines. The 2022 revision incorporates updated ISO references, specific retractor and latch plate requirements, and new center of gravity testing for heavy…

Hardness testing is a cornerstone of quality control for brake linings, ensuring consistency in formulation and processing. The Gogan hardness test (SAE J379-2017) is a nondestructive method that measures the compression of the lining material under load. Unlike Rockwell hardness,…

1. Purpose and Scope SAE J380-2017 establishes a uniform procedure for determining the specific gravity of brake friction materials. This nondestructive test serves as a quality control check to ensure consistency in formulation and processing. It is important to note…

This article summarizes the design recommendations from SAE J383-2022 for motor vehicle seat belt anchorages. The standard provides guidance on anchorage locations to properly transfer occupant restraint forces to the strongest parts of the human anatomy. While stabilized, it remains…

SAE J376, originally issued in 1968 and revised in 1985, was reaffirmed in 2019 to align with the SAE five-year review cycle. This recommended practice establishes guidelines for load indicating devices used in lifting crane service, focusing on performance, accuracy,…

The SAE J377-2007 standard specifies performance and testing requirements for vehicular traffic sound signaling devices, commonly known as horns. This revision introduced important updates for horns intended for high or severe usage areas and refined the combined environment test to…

SAE J366:2011 is a stabilized surface vehicle standard that defines the test procedures, instrumentation, and site requirements for measuring the exterior sound level of heavy trucks and buses. Originally issued in 1969, the standard has been under the stewardship of…

The SAE J370 standard, originally issued in 1968 and cancelled in April 2006, prescribed a set of preferred bolt and capscrew diameters for use in construction and industrial machinery. The goal was to improve serviceability by encouraging designers to choose…

The latest revision of SAE J371 (January 2025) provides a recommended practice for standardizing drain, fill, and level plugs used in off-road, self-propelled work machines. Published by SAE International, this standard aims to reduce the variety of plug types and…

Purpose and Scope SAE J361-2022 is a recommended practice that specifies procedures for the visual evaluation of color and appearance of interior and exterior automotive trim parts and materials. It applies to opaque or nearly opaque materials such as topcoat…

This standard provides a repeatable method for evaluating how well trim materials resist scuffing, essential for maintaining appearance in automotive interiors. Using a Taber rotary platform abraser with a specialized scuff fixture, J365 applies controlled wear under defined conditions. This…