Category SAE Standards

Selecting the right automotive lubricating grease is essential for component longevity and reliable operation. SAE J310 provides a comprehensive framework for understanding grease properties, performance requirements, and evaluation methods. This article distills key insights from the standard to help engineers…

1. Purpose and Scope of SAE J836-2018 SAE J836-2018 is a stabilized information report that provides an abbreviated summary of metallurgical joining by welding, brazing, and soldering as used in the automotive industry. It is intended to reflect current usage…

Qualifying Ethernet physical layer transceivers (PHYs) for automotive use requires a rigorous test plan that ensures performance, reliability, and electromagnetic compatibility. SAE J2962-3 (revised February 2024) provides a unified recommended practice to minimize test variation across OEMs. This article highlights…

For automotive engineers and designers, understanding fiberboard terminology is essential for selecting the right material for interior trim, structural panels, and acoustic components. SAE J947™ JUN2023 provides standardized definitions that help avoid confusion across the supply chain. This guide breaks…

1. Gasoline Composition and Refining Processes Automotive gasolines are complex blends of hydrocarbons derived from petroleum, with a boiling range of approximately 30 to 225 °C (86 to 437 °F). Refining processes are used to both increase the yield of…

The rapid evolution of rechargeable energy storage systems (RESS) has introduced a critical challenge in end-of-life management: preventing cross-contamination during recycling. With a growing mix of chemistries—lead-acid, lithium-ion, nickel-metal hydride, and others—entering the same waste streams, the risk of safety…

Understanding the Standard and Its Purpose The SAE J2598:2020 recommended practice establishes a standardized and repeatable method for measuring the first three natural frequencies and corresponding loss factors of automotive disc brake pads. This procedure applies to modes between 500…

SAE J2582-2018 establishes the hardness, chemical analysis, and microstructural requirements for ductile iron castings used in high temperature automotive and allied applications. Commonly referred to as SiMo ductile iron, these castings are typical in piston-engine exhaust manifolds and turbocharger components.…

SAE J1402 outlines the minimum requirements for air brake hose assemblies used in automotive systems. Understanding the different hose constructions, fitting options, and performance criteria is essential for engineers specifying components for heavy-duty vehicle braking systems. This article covers the…

Executive Summary of the A/C Service Ports Task Force Findings 🛠️ The SAE J3266 report, based on MACS surveys, identifies service port leaks as a top repair issue. Key problems include missing caps (often due to lack of retention), inferior…