Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
⚠️ Cancellation Notice: SAE J1398-1996 was canceled in August 1996. While this standard is no longer active, its technical requirements remain foundational for many current regulations. Always verify the latest applicable standards for new designs. 📘 Overview and Scope SAE…
Standard Overview Originally issued in 1982, SAE J1399-2011 defined performance and testing requirements for electric tachometers used in surface vehicles. The standard covered essential specifications such as accuracy, input signal range, and environmental tolerances, providing a common reference for manufacturers…
Standard Overview and Key Requirements SAE J1394, titled “Metric Nonmetallic Air Brake System Tubing,” specifies requirements for nonmetallic tubing used in metric air brake systems. First issued in 1983 and stabilized in 2013, this SAE standard represents a mature technology…
SAE J1395-1991 specifies test procedures, performance requirements, and design guidelines for front and rear turn signal lamps intended for motor vehicles with an overall width of 2032 mm or more. While this standard is mandatory for wide vehicles, it may…
SAE J1379-2020 defines a standardized laboratory procedure for measuring the rolling resistance of highway truck and bus tires under steady-state, free-rolling conditions. The standard describes three fundamentally different measurement methods—Force, Torque, and Energy—each with specific alignment tolerances, instrumentation accuracy requirements,…
The SAE J1382-2003 standard provides a comprehensive framework for classifying, naming, and dimensionally specifying trenching machines. It applies to trenchers as categorized in SAE J1116 and supplements terms not covered in SAE J1234. This standard covers chain line trenchers, disk…
Standardized terminology is the backbone of effective engineering communication, especially in complex systems like spark-ignited internal combustion engines. SAE J139-2020 provides the definitive language for describing ignition system components, configurations, and operation. This article unpacks the essential definitions, classifications, and…
SAE J1371, cancelled in February 2002, was developed to provide a standardized method for calculating and specifying swing performance characteristics of hydraulic excavators. Although the standard is no longer active, its definitions, formulas, and rating procedures have influenced the design…
Rear cornering lamps provide supplemental illumination to the side and rearward area when backing up, improving safety for vehicles under 9.1 m overall length. This recommended practice defines test methods, performance criteria, and practical guidelines for design and installation. Key Requirements…
SAE J1374-2020 defines a standardized endurance testing and reporting procedure for reciprocating cylinder rod hydraulic seals, primarily used in off-road self-propelled work machines (SAE J1116). The procedure provides a consistent basis for seal comparison, enabling engineers to evaluate performance under…
