Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ISO Standards Interpretation
Comprehensive terminology standard for titanium and titanium alloys covering definitions, classifications, and metallurgical terms The Need for Standardized Titanium Terminology ISO 28401:2024 provides a comprehensive vocabulary for titanium and titanium alloys, serving as the definitive terminological reference for the entire…
Standard method for determining size distribution and number concentration of ultrafine and nanoaerosols using differential electrical mobility analysis Introduction to Ultrafine Aerosol Measurement in Workplaces ISO 28439:2011 provides a standardized methodology for characterizing ultrafine aerosols (particles smaller than 100 nm)…
Standard for LNG ship-to-shore interface, mooring systems, cargo transfer, and safety requirements for port operations Overview of LNG Ship-to-Shore Interface Standardization ISO 28460:2010 addresses the critical interface between LNG carriers and port facilities, covering the entire spectrum of ship-to-shore interactions…
Normal and emergency vapour venting requirements for petroleum storage tanks Introduction to ISO 28300: Tank Venting Standards ISO 28300:2008, with its 2009 Technical Corrigendum, specifies the normal and emergency vapour venting requirements for aboveground liquid petroleum and petroleum-products storage tanks,…
Requirements and test methods for laser welding of metallic dental restorations Introduction to ISO 28319: Dental Laser Welding ISO 28319:2018 specifies requirements and test methods for laser welding and the associated filler materials used in dental laboratories for welding metallic…
General specifications for combined electrophoretic organic + anodic oxidation coatings on aluminium Introduction to Combined Coating Systems on Aluminium ISO 28340:2013 establishes the general specifications for combined coating systems on aluminium that integrate anodic oxidation with electrophoretic organic coatings. This…
Standard test method for measuring glass transition temperature of rubber process oils using differential scanning calorimetry Understanding Glass Transition in Rubber Process Oils ISO 28343:2010 provides a standardized differential scanning calorimetry (DSC) method for determining the glass transition temperature (Tg)…
Requirements for supported and unsupported monolithic and multiple glazing in SSG systems Understanding Structural Sealant Glazing and ISO 28278-1 ISO 28278-1:2011 specifies requirements for the suitability of supported and unsupported glass products used in structural sealant glazing (SSG) systems. Developed…
Quality-controlled assembly and bonding guidelines for SSG systems in building construction Introduction to ISO 28278-2 Assembly Rules for SSG ISO 28278-2:2010 provides comprehensive guidelines for the assembly and bonding of glass elements in structural sealant glazing (SSG) systems. This standard…
Determination of surface contamination levels in sintered metal materials Introduction to ISO 28279: Cleanliness Testing for PM Parts ISO 28279:2010 specifies a standardized method for determining the amount and nature of surface contamination on powder-metallurgy (PM) parts. Developed by ISO/TC…