Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Engineering requirements for cable fixing systems to withstand electrodynamic forces during short-circuit conditions 📌 Scope: IEC 61914:2015 specifies requirements and tests for cable cleats used to secure cables in electrical installations. The standard focuses on the mechanical performance of cable…
Standardized parameter assemblies and monitoring formats for starters and similar networked industrial equipment 📌 Scope: IEC 61915-2:2011 specifies root device profiles for low-voltage starters and similar equipment connected to industrial communication networks. It defines parameter blocks, monitoring formats, and diagnostic…
A technical framework for global harmonization of electrical accessory standards — plugs, sockets, switches, couplers, and installation accessories 📌 Scope: IEC TR 61916:2017 provides a comprehensive technical report on the harmonization of standards for electrical accessories. It identifies gaps, overlaps,…
Engineering methods for determining hot-spot temperature, thermal stability, and cooling requirements in power capacitor banks 📌 Scope: IEC TR 61917:1998 provides guidance on temperature measurement methods for power capacitors used in reactive power compensation, harmonic filtering, and power factor correction…
A comprehensive engineering analysis of the magneto-optical MiniDisc standard and its recording/playback system 📌 Scope: IEC 61909:2000 specifies the mechanical, electrical, and optical characteristics of the MiniDisc (MD) system — a 64 mm magneto-optical disc format for digital audio recording,…
Engineering analysis of Radiation Dose Structured Reports (RDSR) for radiography and radioscopy systems 📌 Scope: IEC 61910-1:2014 specifies requirements for radiation dose documentation in medical X-ray imaging. It defines a standardized structured report format — the Radiation Dose Structured Report…
Engineering principles for main control room design, human-system interface, and operator performance in nuclear facilities 📌 Scope: IEC TR 61911:2003 provides technical guidance on the design, evaluation, and validation of control rooms for nuclear power plants. It addresses human factors…
Engineering guide to over-current protective device coordination for electrical distribution systems 📌 Scope: IEC TR 61912-2:2009 provides technical guidance on selectivity (discrimination) between over-current protective devices (OCPDs) in low-voltage electrical installations. It covers selectivity between circuit-breakers, fuses, motor protection relays,…
Standard: IEC 61904-2000 | Category: Nuclear Instrumentation | Published: 2000 💡 IEC 61904 addresses the specific requirements for CAMAC modules used in nuclear spectroscopy — analog-to-digital converters (ADCs), multichannel analyzers (MCAs), and histogramming memory modules that form the core of…
Standard: IEC PAS 61906-2005 | Category: Nuclear Instrumentation (Publicly Available Specification) | Published: 2005 💡 As a Publicly Available Specification (PAS), IEC PAS 61906 addresses a critical gap in the CAMAC ecosystem: the management of firmware in microprocessor-based and FPGA-based…