Category CSA Standards

Standardizing Performance Evaluation for Proximity Cards and Coupling Devices Operating at 13.56 MHz Scope IEC 10373-3-12:2016 (developed jointly with ISO/IEC JTC 1/SC 17) is part of the multi-series standard covering test methods for identification cards. This specific part focuses on contactless…

Mastering Physical, Mechanical, and Environmental Test Protocols for Global Card Compliance and Reliability Scope and Structure of CAN/CSA-ISO/IEC 10373-1-07 ISO/IEC 10373-1:2006, adopted in Canada as the National Standard CAN/CSA-ISO/IEC 10373-1-07, defines the test methods for identification cards as specified by…

An in-depth look at the Canadian adoption of IEC 60745-2-15, covering scope, critical technical requirements, and compliance pathways for hedge trimmer manufacturers. CAN CSA C22.2 No. 60745-2-15-10 (2018) is the Canadian national standard for the safety of hand-held motor-operated electric…

Understanding the Scope, Requirements, and Compliance for Lightfastness Testing in Textiles Scope CAN CGSB 4.2 No. 31-2004 (2013) Textile Test Methods – Colour Fastness to Light: Xenon Arc Lamp Method is a Canadian national standard developed by the Canadian General…

Comprehensive Guide to Canadian Compliance for Motor-Operated Planers Overview and Scope CAN/CSA C22.2 No. 60745-2-14-04 (2018) is the Canadian adoption of the international standard IEC 60745-2-14:2003, which specifies particular safety requirements for hand-held motor-operated electric planers. This standard is part…

Technical Overview and Compliance Guide for ISO/IEC 10279 International standard IEC 10279-94 (also published jointly as ISO/IEC 10279:1991 and its Amendment 1:1996) provides a definitive specification for the Full BASIC programming language. Originally developed to resolve fragmentation among vendor-specific BASIC…

A Comprehensive Guide to North American Safety and Performance Standards for Gas-Fired Central Heating Equipment 1. Scope and Applicability of ANSI Z21.47-2016 / CSA 2.3-2016 The ANSI Z21.47-2016 / CSA 2.3-2016 standard, formally titled Gas-Fired Central Furnaces, serves as the…

A comprehensive guide to the Canadian national standard for electric chain saw safety, including scope, technical requirements, and compliance 1. Introduction and Scope CAN CSA C22.2 No. 60745-2-13-11 (2017) is the Canadian national adoption of the international standard IEC 60745-2-13,…

Comprehensive Guide to the Canadian Adoption of IEC 60745-2-11 for Jig and Sabre Saws Scope and General Applicability The standard CAN CSA C22.2 No. 60745-2-11-04 (2018) applies to hand-held motor-operated or magnetically driven reciprocating saws, including jig saws and sabre…

Technical Overview of the International Standard for Liquid Flow Sizing in Industrial‑Process Control Valves IEC 10279‑94 (2004) – officially titled Industrial‑process control valves – Sizing equations for liquid including choking condition – is a pivotal international standard that provides engineers with…