Category ASTM Standards

ASTM D6441-05 (Reapproved 2024) provides standardized methods for assessing the hiding power of powder coatings applied by electrostatic spraying. The standard defines two distinct test methods based on reflectometric and thickness gauge measurements, offering flexibility for different quality control and…

📐 Specimen Requirements and Preparation The test method defines specific specimen weights based on the application. For chemical analysis, specimens must weigh no less than 1 gram, with a preferred weight of 2 grams, and must be in moisture equilibrium…

The ASTM D6440-10 (Reapproved 2018) standard provides a comprehensive set of definitions for the hydrocarbon resin industry. Designed to bridge communication gaps between manufacturers and consumers, this terminology standard addresses the evolving nature of the industry as it transitions from…

The ASTM D6439-23 standard serves as a comprehensive guide for ensuring the reliability of steam, gas, and hydroelectric turbine lubrication systems. It emphasizes that optimum reliability relies on a well-designed system and a pure lubricant, free from detrimental contaminants. The…

The ASTM D6438-05 (Reapproved 2022) standard outlines a test method for determining the concentration of acetone, methyl acetate, and parachlorobenzotrifluoride (PCBTF) in paints and coatings using solid phase microextraction (SPME) headspace sampling coupled with gas chromatography (GC). This method is…

ASTM D6437-22 provides a standardized method for determining trace levels of alkalinity in polyether polyols used in polyurethane manufacturing. Specifically designed for materials exhibiting very low basicity, this test method quantifies the Controlled Polymerization Rate (CPR) value. This metric is…

📐 Scope and Significance of D6435-99 This test method, under the jurisdiction of ASTM Subcommittee D20.20 on Plastic Products, establishes a standardized procedure for determining the mechanical properties of plastic lumber and plastic lumber shapes when loaded in shear at…

📜 Purpose and Scope of the Reporting Guide ASTM D6436-14 (Reapproved 2022) provides a comprehensive framework for reporting the property values of plastics and thermoplastic elastomers in published literature, data sheets, and presentations. The primary objective is to minimize confusion…

ASTM D6434-12 (Reapproved 2018), officially designated as the Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes, provides a critical framework for quality assurance in the geosynthetics industry. Under the jurisdiction of Committee D35 on Geosynthetics, this…

📐 Overview and Scope of ASTM D6433-24 ASTM D6433-24 establishes a standardized practice for conducting pavement condition index (PCI) surveys on roads and parking lots through visual inspections. The PCI provides a numerical rating from 0 (worst possible condition) to…

🔍 Purpose and Application of the Surface GPR Method ASTM D6432-19 provides a comprehensive framework for the equipment, field procedures, and interpretation methods used in the Surface Ground Penetrating Radar (GPR) method. This high-frequency electromagnetic (EM) technique operates within a…

🛠️ Equipment and Field Procedures This guide summarizes the equipment, field procedures, and interpretation methods for the assessment of the electrical properties of subsurface materials and their pore fluids, using the direct current (DC) resistivity method. Measurements are made from…