Category ASTM Standards

📜 Scope and Significance of D1071-17 ASTM D1071-17 specifies standardized test methods for the volumetric measurement of gaseous fuel samples, including liquefied petroleum gases (LPG) in the gaseous state at normal temperatures and pressures. The selection of apparatus covered in…

This article details the ASTM D1072-23 standard test method for total sulfur measurement in fuel gases. Utilizing combustion and barium chloride titration, it addresses sulfur concentrations from 25 to 700 mg/m³ for various gaseous fuels. 📐 Scope and Interferences ASTM…

🏗️ Scope, Terminology, and General Characteristics According to Section 1 of the standard, this specification covers fine aggregate intended for use in asphalt paving mixtures. It is designed to describe material from a single source. The standard defines fine aggregate…

🔬 Scope and Summary of Test Methods ASTM D1068-15 provides standardized procedures for determining the concentration of iron in water. The standard covers methods for total recoverable iron, dissolved iron, and ferrous iron. By performing the total and dissolved iron…

The ASTM D1070-03 standard provides comprehensive test methods for measuring the relative density of gaseous fuels. These methods are essential for laboratory analysis, control, and reference purposes, ensuring accuracy in gas measurement under standardized conditions. 🔬 Test Methods Overview This…

📐 Scope and Applicability of D1066-18 This standard, designated D1066-18, provides a comprehensive practice for the sampling of saturated and superheated steam. It is applicable to steam produced in fossil fired and nuclear boilers, or by any other process means…

📐 Test Method Selection and Scope ASTM D1067 −16 (Reapproved 2024) provides standardized procedures for determining the acidity or alkalinity of all types of water. Hydrogen or hydroxyl ions present by virtue of dissociation or hydrolysis of solutes are neutralized…

📐 Specimen Geometry and Bonding Variables This test method covers the determination of comparative cleavage properties of adhesive bonds when tested on standard shape metal specimens. The standard has been approved for use by the U.S. Department of Defense. The…

The ASTM D1064-97 standard specifies colorimetric methods for determining iron in rosin, tall oil fatty acids, and related naval stores products. These methods are crucial for detecting iron contamination, which can catalyze oxidation and cause discoloration in these products. Both…

🔬 Scope and Applicability ASTM D1065-18 (Reapproved 2022), under the jurisdiction of ASTM Committee D01, provides a standardized test method for determining the percentage of unsaponifiable matter in pine chemicals. As defined in Terminology D804, this includes rosin, tall oil,…