Category ASTM Standards

📐 Scope and Terminology of the Water Reaction Test The ASTM D1094-24 standard, formally designated as the Standard Test Method for Water Reaction of Aviation Fuels, is essential for detecting water-miscible components such as surfactants and alcohols in both aviation…

ASTM D1084-16 (Reapproved 2021) provides standard test methods for determining the viscosity of free-flowing, self-leveling adhesives. These methods are designed for Newtonian and near-Newtonian materials, excluding thixotropic and plastic substances whose flow characteristics are dependent on shear rate and previous…

ASTM D1091 – 11 (Reapproved 2016) establishes standardized test methods for the determination of phosphorus in unused lubricating oils, lubricating oil additives, and their concentrates. Jointly issued under the fixed designation D1091, these methods have been approved for use by…

🏛️ Scope and Structure of ASTM D1079-24 ASTM D1079-24 represents the definitive lexicon for the roofing and waterproofing industry, under the jurisdiction of Committee D08 and the direct responsibility of Subcommittee D08.01 on Nomenclature, Definitions and Editorial. Approved in August…

📏 Scope and Specimen Thickness This test method, formally designated as ASTM D1082–17 (Reapproved 2024), covers the determination of the dissipation factor and relative permittivity of natural muscovite mica. The standard applies to two distinct material categories defined specifically by…

📐 Overview and Scope of ASTM D1083–91 Standard Test Methods ASTM D1083–91 (Reapproved 1998) establishes standardized procedures for assessing the mechanical handling integrity of unitized loads and large shipping cases and crates. The test methods simulate real-world handling stresses from…

📜 Scope and Categories of D1076–23 ASTM D1076-23, under the jurisdiction of Committee D11 on Rubber and Rubber-like Materials, provides the specification for five categories of first-grade concentrated natural rubber latex. This standard, originally approved in 1949 and updated in…

📐 Scope, Equipment, and Terminology Under D1078-11 ASTM D1078-11 (Reapproved 2019), also designated as 195/98, establishes a standardized test method for determining the distillation range of volatile organic liquids. The procedure is applicable to liquids that boil between 30 °C…

📐 Specimen Preparation and Conditioning ASTM D1074 covers the compressive strength testing of compacted asphalt mixtures. Specimens are prepared from laboratory-mixed or plant-produced materials, following strict sampling protocols per D75, D140, and D979. The standard cylindrical specimen typically measures 4.00…

🧪 Test Purpose and Scope Standard D1075 (also designated AASHTO T165) evaluates the moisture susceptibility of compacted bituminous mixtures containing asphalt cement. The test measures the loss of compressive strength resulting from the action of water. A numerical Index of…