Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📜 Scope and Significance of ASTM D1348 ASTM D1348‑94 (Reapproved 2008) defines the standard procedures for determining moisture content in cellulose. This standard, approved for use by agencies of the U.S. Department of Defense, covers three distinct procedures: Test Method…
🌡️ Standard Temperature and Humidity Conditions The ASTM D1349-14 (Reapproved 2024) standard practice establishes the foundational temperature and humidity conditions required for consistent and comparable testing of rubber compounds. Reliable comparisons between different laboratories and rubber compounds hinge critically on…
The D1351-20 standard specifies thermoplastic polyethylene insulation for electrical wire and cable. This material is suitable for continuous operation at conductor temperatures up to 75 °C and voltages up to 35,000 V for power applications. 📋 Scope and Application This…
ASTM D1343-95 (Reapproved 2019), under the jurisdiction of ASTM Committee D01 on Paint and Related Coatings, provides a straightforward ball-drop method for determining the viscosity of cellulose derivatives in solution. This test is essential for characterizing materials intended for processing…
🗂️ ASTM D1347-72: Standard Test Methods for Methylcellulose ASTM D1347 – 72 (Reapproved 1995) provides a comprehensive suite of standard test methods for the characterization of methylcellulose. This standard, under the jurisdiction of ASTM Committee D01.36 on Cellulose and Cellulose…
ASTM D1338-99 (Reapproved 2021) provides a standardized methodology for determining the working life of liquid or paste adhesives that possess a relatively short usable pot life. This practice, under the jurisdiction of Committee D14 on Adhesives, is essential for quality…
🔍 Overview and Significance ASTM D1342-92 (Reapproved 2002) specifies a chromatographic test method for the determination of paraffin-type hydrocarbons in carnauba wax. This analysis is essential for quality control, allowing analysts to quantify the natural hydrocarbon content or detect adulteration…
📐 Test Scope and Specimen Types ASTM D1335-21 establishes the standard procedure for determining the tuft bind of pile yarn floor coverings. The test method quantifies the force required to either pull a tuft completely free from the backing structure…
The ASTM D1336 – 07 (Reapproved 2019) standard, under the jurisdiction of Committee D13 on Textiles, defines a specific test method for measuring the distortion of one set of yarns over another in woven cloth. This technique evaluates the propensity…
🧪 Scope and Significance of D1337-10 ASTM D1337-10 (Reapproved 2021) defines the Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength. This practice establishes a laboratory method for measuring the storage life of an adhesive by evaluating…
🧪 Overview of Test Methods ASTM D1331-20 provides four distinct test methods for determining surface tension and interfacial tension in liquid materials, including paints, solvents, and surface-active agent solutions. These methods are categorized by the type of measurement and the…
📐 Scope and Referenced Documents D1334-18 establishes a definitive referee test method for the determination of the wool base content and the clean wool fiber present in a lot of raw wool. The procedure involves commercial-scale scouring of the entire…