Category ASTM Standards

This article summarizes the ASTM D2557-98 (Reapproved 2017) standard, which provides a test method for determining the tensile-shear strength of adhesives used for bonding metals when tested at extreme subzero temperatures. The standard is essential for evaluating adhesive performance in…

📐 Apparatus and Specifications The ASTM D255-92 standard specifies the use of a steam generator with a capacity of approximately 2 gallons (7600 cm³), made of metal or glass. A metal bath is required to immerse the distilling flask to…

📐 Scope and Purpose of Standard Practice D2555 Standard Practice D2555 establishes the foundational reference for determining clear wood strength values for commercially important timber species. As outlined in the standard, this practice provides the authoritative starting point required for…

📏 Scope and Terminology This test method, ASTM D2541-93, provides procedures for determining critical diameter and detonation velocity of liquid monopropellants. Critical diameter is defined as the largest tube diameter that will not support stable detonation propagation under specified conditions.…

ASTM D2549-23 outlines a standard test method for separating representative aromatics and nonaromatics fractions from high-boiling oils using elution chromatography. This method is essential for analyzing hydrocarbon mixtures in the petroleum industry. 📐 Scope and Applicable Boiling Ranges The test…

📐 Test Overview and Scope ASTM D2539-93 addresses the shock sensitivity of liquid monopropellants, focusing on hazards from hydrodynamic shock. The possible consequences include nonpropagating explosion, low-velocity detonation, and high-velocity detonation. This test method is specifically useful for evaluating propagating…

🔬 Scope and Summary of Test Method D2540 ASTM D2540 – 93 (Reapproved 2001) covers the determination of the sensitivity of liquid monopropellants to the impact of a drop weight. It is identical in substance with the JANNAF method, “Drop…

🎯 Scope and Significance This standard test method, designated D2534 – 88 (Reapproved 2017), specifies the procedure for determining the coefficient of kinetic friction for petroleum wax coatings and wax-based hot melt coatings when sliding over themselves. This property is…

📐 Scope and Apparatus Specifications ASTM D2538-18 is the standard practice for evaluating the relative fusion characteristics of poly(vinyl chloride) (PVC) compounds using a torque rheometer. It encompasses four distinct test methods: the Fusion Test (Section 9), Thermal Stability Test…

📐 Scope and Significance of D2532-22 ASTM D2532-22, formally titled “Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants,” is a critical standard under the jurisdiction of ASTM Committee D02 on Petroleum…