Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
ASTM D2503‑92 (Reapproved 2016) establishes a thermoelectric method for determining the average relative molecular mass (molecular weight) of hydrocarbon oils and petroleum fractions. By measuring the vapor pressure lowering of a solution relative to a pure solvent, this test method…
📐 Scope and Application The ASTM D2500-23 standard, also designated as British Standard 4458, establishes a test method for determining the cloud point of petroleum products and biodiesel fuels. This method is specifically designed for samples that are transparent in…
The ASTM D2501-24 standard provides a calculation method for determining the Viscosity-Gravity Constant (VGC) of petroleum oils. This parameter serves as a valuable indicator of the chemical character of petroleum fractions, distinguishing between paraffinic and aromatic base stocks. This article…
📐 Scope and Terminology ASTM D2497-07 (Reapproved 2018) establishes standard tolerances for first-quality, manufactured, organic-base filament single yarns, governing permissible variations in linear density, tenacity, elongation, twist, and commercial weight (Section 1.1). The standard applies regardless of package type or…
📐 Scope and Classification of Round Timber Piles ASTM D25-12 (Reapproved 2022) establishes the specification for the physical characteristics of unused round timber piles intended for structural use, whether treated or untreated. As defined in Section 1, the specification is…
📐 Scope and Sampling Requirements ASTM D2494-13 (Reapproved 2020) specifies the test method for determining the commercial mass of a shipment of yarn or manufactured staple fiber or tow. It applies to all fiber types in yarn form except silk,…
🔍 Scope and Applicability of D2495-07 This standard, designated D2495-07 (Reapproved 2024), provides a test method for determining the amount of moisture in cotton through oven-drying. It is applicable to raw cotton, cotton stock in process, and cotton waste. By…
📜 Scope and Classification This specification covers asphalt roofing in sheet form, composed of asphalt-saturated organic felt coated on both sides with asphalt and surfaced on the weather side with mineral granules. It is intended for use in widths as…
🧪 Scope and Test Method Summary ASTM D2492-02 (Reapproved 2012) specifies the determination of sulfate sulfur and pyritic sulfur in coal, with organic sulfur calculated by difference. This method is strictly applicable to coal and is not intended for coke…
🧪 Scope and Significance ASTM D2493/D2493M-24 defines a standardized practice for the construction and application of viscosity-temperature charts specifically for asphalt binders. These charts serve as a critical graphical tool for estimating the viscosity of an asphalt binder at any…
ASTM D2488-17 is a standard practice for the description and identification of soils using visual-manual procedures, commonly used in geotechnical engineering for field classification. It outlines methods for describing soils for engineering purposes and provides an optional identification procedure based…
📐 Scope and Terminology ASTM D2489/D2489M‑24 provides a test method for estimating the degree of particle coating in asphalt‑aggregate mixtures by classifying the percentage of coarse particles that are completely coated. The standard is under the jurisdiction of Committee D04…