Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📐 Product Types and Classifications This specification covers asphalt roll roofing in sheet form, typically 36 in. (914 mm) wide, used as a cap sheet in built-up roofs. The material is classified into four types based on minimum mass per…
ASTM D3708 – 88 (Reapproved 2010) specifies a standard test method for determining the weight of hot melt wax applied to corrugated board by curtain coating. This method is critical for process control in manufacturing to ensure consistent barrier properties…
ASTM D3709 – 89 (Reapproved 2010), “Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions,” provides a standardized procedure for evaluating how well water-in-oil emulsions resist breakdown when subjected to repeated freeze-thaw cycles. This…
ASTM D3706-88 (Reapproved 2000), an American National Standard, defines a standardized method for evaluating the hot tack of wax-polymer blends used in flexible packaging heat seal applications. This test method relies on the Flat Spring Test to determine the cohesive…
ASTM D3707-89 (Reapproved 2010) provides a standardized procedure for evaluating the storage stability of water-in-oil emulsions under accelerated thermal conditions. By exposing the emulsion to a controlled elevated temperature, this test method predicts its resistance to separation during storage and…
📐 Scope and Summary of the Oscillating Motion Test Method ASTM D3704-24 establishes a standard procedure for determining the wear preventive properties of lubricating greases using the Falex block-on-ring friction and wear test machine. This test method operates a steel…
ASTM D3705-14 (Reapproved 2019) is the standardized test method for determining the misting characteristics of lubricating fluids used in industrial mist lubrication systems. Administered by Subcommittee D02.L0.01 on Metal Removal Fluids and Lubricants, this method quantifies critical performance parameters such…
📐 Scope and Specimen Configuration ASTM D3702 – 24, Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine, establishes a procedure for determining the wear rate and…
⚙️ Test Method Scope and Applicability ASTM D3703 −18 (Reapproved 2024) describes the determination of the hydroperoxide content, expressed as the hydroperoxide number, of aviation turbine fuels, gasoline, and diesel fuels. The stated range of the hydroperoxide number included in…
🧪 Scope and Methodology ASTM D3701 −23 establishes a standard test method for the determination of the hydrogen content of aviation turbine fuels using low-resolution nuclear magnetic resonance (NMR) spectrometry. The method employs a continuous wave, low-resolution NMR spectrometer to…
📜 Scope and Significance ASTM D370-02 outlines a standard practice for the dehydration of oil-type preservatives prior to distillation testing. The removal of water allows for distillation results to be reported on a dry basis, significantly enhancing the accuracy of…
ASTM D3700-21 establishes the standard practice for obtaining representative samples of liquefied petroleum gas (LPG) and other natural gas liquids (NGLs) using a Floating Piston Cylinder (FPC). This method is critical for maintaining single-phase conditions, preserving the sample’s compositional integrity…