Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
ASTM D3923-23 establishes standard practices for detecting integrity breaches in reverse osmosis (RO) and nanofiltration (NF) devices. These practices are critical for identifying failures where there is a direct communication between the feed or concentrate and the permeate stream, which…
📐 Scope and Test Method Summary This test method covers the determination of dissolved and total recoverable strontium in water and wastewater by atomic absorption spectroscopy. The method is applicable in the range from 0.1 to 1 mg/L of strontium.…
📘 Surface and Cure Terminology This section defines terms related to surface imperfections and cure conditions in pultruded products. Barcol hardness is measured using a Barber Colman impresser, providing a relative measure of cure (Note 2 states values can differ…
ASTM D3919-15 establishes the standard practice for the quantitative determination of trace elements in water, wastewater, and various aqueous matrices using graphite furnace atomic absorption spectrophotometry (GFAAS). This technique is specifically designed for analytes present at concentration levels below the…
📐 Specimen Configuration and Testing Scope ASTM D3916-22 is the definitive standard for determining the tensile properties of pultruded glass-fiber-reinforced thermosetting plastic rods. It is specifically applicable to diameters ranging from 2.03 mm (0.08 in.) to 12.7 mm (0.5 in.),…
📐 Scope and Applicable Terminology ASTM D3917-23 defines production tolerances for standard rods, bars, shapes, and flat sheet pultruded from thermosetting glass-reinforced plastics. This specification, originally approved in 1980 and revised in 2023, provides a clear framework for evaluating profile…
ASTM D3914 – 02 (Reapproved 2016) provides a standardized method for determining the in-plane shear strength of pultruded, glass-fiber-reinforced thermosetting plastic rods. This test method is critical for assessing the reinforcement-to-resin bond quality in composites utilized across various structural applications.…
📐 Scope and Application of ASTM D3915-06 ASTM D3915-06 covers plastic compounds consisting of polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), or vinyl chloride copolymers for use in pressure piping applications. The specified compounds contain necessary ingredients such as lubricants,…
🔬 Overview and Scope of ASTM D3913-03 ASTM D3913 — Standard Test Method for Acidity in Basic Chromium Tanning Liquors provides a standardized procedure for determining the titratable acidity of chrome tanning liquors. The term “titratable acidity” specifically includes not…
🧪 Test Overview and Significance ASTM D3911 – 16 (Reapproved 2021) establishes a uniform test method for evaluating protective coating systems under simulated Design Basis Accident (DBA) conditions for light-water nuclear power plants. During a DBA, primary containment environments are…
🧪 Standard Overview and Scope ASTM D3912-10 (Reapproved 2023) establishes a standardized screening test for evaluating the chemical resistance of protective coatings and linings intended for Coating Service Level I and II applications in nuclear power plants. Issued by ASTM…
🧪 Scope and Composition of D391-94 ASTM D391-94 (Reapproved 2000) provides the standard specification for Creosote-Coal Tar Solution used in the preservative treatment of wood. The standard mandates that the solution must be a pure coal tar product derived entirely…