Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
ASTM D4029/D4029M-23 specifies the requirements for finished woven glass fabrics made from “E” electrical glass fiber yarns, intended for use as reinforcing materials in laminated plastics for structural applications. This standard covers terminology, general requirements, and physical properties, and it…
This test method, designated D4027 −98 (Reapproved 2019), covers the determination of shear properties of structural adhesives using a modified-rail test configuration. Developed under the jurisdiction of ASTM Committee D14 on Adhesives, it is designed to provide accurate measurements of…
📋 Scope and Key Requirements This practice, designated as D4025-18, specifies the manner in which results of examination and analysis of deposits formed from water for subsurface injection are to be reported. It covers inorganic, organic, and biological constituents, differing…
📐 Scope and Principle This test method, designated ASTM D4026-06 (Reapproved 2021), covers the determination of residual styrene monomer in styrene-butadiene (SBR) latex. The procedure is based on the direct injection of a diluted latex sample into a gas chromatograph.…
📐 Scope and Classification ASTM D4024‑22 covers machine‑made glass‑fiber‑reinforced thermosetting‑resin (RTRP) flanges, excluding contact‑molded types. It specifies requirements for materials, workmanship, performance, and dimensions. Flanges may be produced integrally with a pipe or fitting, with a socket for adhesive bonding,…
📐 Scope and Material Composition This specification, formally designated as Standard Specification for Coal Tar Roof Cement, Asbestos Containing under ASTM D4022/D4022M, establishes the requirements for cement used in trowel application for coal tar roofing and flashing systems. According to…
📐 Key Terminology for Humidity Measurements The ASTM D4023-82 standard provides essential definitions for humidity measurements. Absolute humidity (dv) is the ratio of the mass of water vapor mv to the total volume V of moist air, expressed as dv…
📐 Scope and Summary of the Distillation Test The D402/D402M-24 test method provides a standardized distillation procedure for cutback asphalts, focusing on the determination of volatile constituents. The values in this standard are expressed in either SI units or inch-pound…
🧪 Scope and Material Definition ASTM D4020-18 provides a standardized specification for the identification of virgin, natural color, unmodified homopolymer ultra-high-molecular-weight polyethylene (UHMWPE) molding and extrusion materials. Its primary purpose is to offer a framework for sellers and purchasers to…
🔬 Summary of Test Method and Scope ASTM D 4019 – 94a defines a standard procedure for determining moisture in plastics using coulometric regeneration of phosphorus pentoxide (P₂O₅). The method is applicable for moisture contents © 2026 TNLab — This…
📐 Scope and Material Applicability This test method is applicable to all paints and paint materials, including resins, monomers, and solvents, with the exception of aldehydes and certain active metals, metal oxides, and metal hydroxides. The evaluation was limited to…
📐 Specimen Preparation and Configuration According to D4018-23, tensile testing is performed on resin-impregnated and consolidated specimens made from continuous filament carbon and graphite yarns, rovings, and tows. This method ensures uniform load transfer for accurate tensile property evaluation. The…