Category ASTM Standards

ASTM D5267 – 97 (Reapproved 2017) describes a precise methodology for quantifying the force required to extrude an adhesive from a cartridge under controlled temperature conditions. This standard specifically addresses the application challenges posed by cold temperatures at job sites,…

🔍 Scope and Core Definitions ASTM D5266-13 (Reapproved 2020) establishes a standardized practice for the visual estimation of the percentage of wood failure in adhesive bonded joints. This practice covers plywood-shear, block-shear, and finger joint test specimens, as well as…

🧪 Overview, Scope, and Apparatus ASTM D5264 — 98 (Reapproved 2019) defines a standardized laboratory practice for evaluating the abrasion resistance of printed materials using the Sutherland Rub Tester. This test method is essential for quality assurance in the packaging…

📐 Scope, Significance, and Terminology ASTM D5265-23 specifically addresses the vulnerability of elongated packages during handling and transport. The test method determines the capability of a long package with a narrow cross-section to resist an impact near its center when…

ASTM D5263‑23 specifies a colorimetric procedure for evaluating the relative degree of oxidation in bituminous coal caused by weathering. By extracting humic acids with an alkali solution and measuring their absorbance at a specific wavelength, this test method provides a…

📘 Scope and Significance of D5262-21 ASTM D5262-21 establishes a definitive procedure for evaluating the unconfined tension creep and creep rupture behavior of planar geosynthetics used primarily in reinforcement applications. The test method is broadly applicable to all geosynthetics, including…

🧪 Scope and Application ASTM D5260-22 is a standard classification specifically designed to categorize the chemical resistance of poly(vinyl chloride) (PVC) homopolymer and copolymer compounds, as well as chlorinated poly(vinyl chloride) (CPVC) compounds. The evaluation is conducted through the simple…

📐 Scope and Specimen Preparation ASTM D5261-10 (Reapproved 2024) provides an index test method for determining the mass per unit area of all geotextiles. The procedure requires weighing test specimens of known dimensions that are cut systematically from various locations…

🔬 Scope and Purpose of D5259−24 This standard, designated D5259−24, covers a membrane filter (MF) procedure for the detection and enumeration of enterococci bacteria in water. The targeted organisms include Enterococcus faecalis, E. faecium, E. avium, and their varieties. These…

📐 Scope and Sample Preparation ASTM D5258-22 covers the closed vessel microwave acid digestion of soils and sediments for the subsequent determination of acid-extractable concentrations. The analytical sample is arbitrarily defined as material that passes a 10-mesh (approximately 2 mm…

ASTM D5256-14 (Reapproved 2022), under the jurisdiction of Committee D19 on Water, establishes a standardized protocol for determining the relative efficacy of dynamic solvent systems for dissolving water-formed deposits. The standard outlines key terminology, sampling requirements, and test procedures necessary…

🧪 Scope and Application ASTM D5257-17 specifies a standard test method for the determination of dissolved hexavalent chromium (Cr(VI)) in wastewater, surface water, and drinking water using ion chromatography. This method is validated for concentrations ranging from 1 to 1000…