Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO·PART8 — BS ISO Standards Single-File Series Overview · Batch 8 — A Compilation of 150 International Standards (ISO) and Their Technical Points
This review covers 150 single-file ISO standards from BS ISO 11156 to BS ISO 12152, systematically summarising ergonomics and manual handling, iron-ore direct reduction, space systems, water-quality measurement, jewellery precious metals, surface chemical analysis, fatigue testing, cranes, library indicators, building sealants, coal and solid fuels.
This review covers Batch 8 of the BS ISO single-file series, bringing together 150 independent International Standards (ISO) from BS ISO 11156 to BS ISO 12152. The batch spans ergonomics, iron-ore direct reduction, space systems, water-quality measurement, jewellery precious metals, surface chemical analysis, fatigue testing, cranes, library indicators, building sealants, coal and solid fuels, and aerospace.
💡 This batch includes the ergonomics manual-handling series (11228), the iron-ore direct-reduction series (11256–11258), the metallic fatigue-testing series (12106–12111) and the jewellery precious-metal determination series (11427, 11494, 11495). Numerical values should be checked against the current official BSI edition.
1. Series Overview 📌
This batch covers the continuous range BS ISO 11156 to BS ISO 12152. Clusters: 11156–11262 belong to accessible packaging, hydraulic filter elements, workplace cadmium, medical supply units, ship gangways, aerospace hydraulic cleanliness, space solar panels, air quality, ergonomics manual handling, space probabilistic risk assessment, rubber accelerators, shaft-DRI iron ores, soil cyanide, ITS lane-keeping, soil redox and green tea; 11270–11398 belong to nuclear criticality safety, iron-ore vocabulary, large yachts, synthetic-rubber molecular mass, rubber dispersion, rubber lifetime, ship coating appearance, water quality, smart manufacturing, optical infrared materials, crocodile skins and ostrich skins; 11408–11513 belong to machine tools, PE pipe jointing, IC-engine rubber hoses, jewellery silver/platinum/palladium, nickel/ferronickel analysis, plastics rheology, vehicle electrical connectors, optical glass birefringence, soil pretreatment, agricultural hydraulic coding, paper optical properties, steel NDT personnel, motorcycle chassis dynamometers, glow-discharge depth profiling and gas cylinders; 11515–11657 belong to composite cylinders, building sealants, milling-cutter designation, metallic earing tests, aircraft ground equipment, iron-ore tin/multi-element, loss on ignition, insulation ageing, crude-pipeline filling, carbon-fibre filaments, financial key management, jewellery sampling, radioactive-waste encapsulation, wheeled fire extinguishers, library performance indicators, crane mass, flowmeter performance, sulfur dioxide, aerospace hose part numbering, hydrometric sediment and cardiovascular extracorporeal systems; 11658–11856 belong to crane access/guards, mobile-crane performance, ships, pattern disks for warp knitting, tractor safety signs, water scintillation counting, aluminium carbon fracture energy, soil phenols, ballast water, coal analysis, arsenic/selenium/fluorine, brazing personnel qualification, automotive V-ribbed belts, coal classification, scanning-probe cantilever constants, tractor sensor interface, concentrate sampling, archive document storage, forestry chain-saws, rubber magnesium, carpet fibre binding and building performance; 11863–12152 belong to stereomicroscopes, pile-driving equipment, hot-formed helical springs, space subsystem interface documents, fine-ceramic conductivity, plastics smoke corrosivity, building ignitability tests, nuclear measurement uncertainty, microbeam analysis, corrosion-resistant cast steels, heat-resistant cast steels, crane availability, polymer dispersions, road-vehicle crosswind, printing-ink light fastness, cylindrical roller bearings, synchronous belts, airbag vocabulary, metallic fatigue series, excavator protective structures, hearing aids, plain bearings, fire propagation, agricultural drawbar jacks, stationary emissions and lubricant foaming tendencies.
2. Series Composition and Main Standards
This batch has several large clusters. Iron-ore direct reduction (11256, 11257, 11258, 11323) covers clustering index, low-temperature reduction-disintegration, reducibility index/final degree of reduction/metallisation, and iron-ore/DRI vocabulary. Ergonomics (11228-1, 11228-2, 11228-3) covers manual handling (lifting and carrying, pushing and pulling, repetitive tasks). Space systems (11221, 11227, 11231, 11892, 11893) covers electrostatic discharge, hypervelocity-impact ejecta, probabilistic risk assessment, interface control documents and project organisation. Water quality (11222, 11349, 11350, 11352, 11704) covers measurement uncertainty, low-volatility lipophilic substances, fluctuation genotoxicity, uncertainty estimation and scintillation counting. Jewellery precious metals (11427, 11494, 11495, 11596) covers silver, platinum, palladium and sampling. Surface chemical analysis (11505, 11775) covers glow-discharge depth profiling and cantilever spring constants. Metallic fatigue (12106, 12107, 12108, 12111) covers axial-strain control, statistical planning, crack growth and thermomechanical fatigue. Cranes (11629, 11660-2, 11662-2, 11994) covers mass measurement, access/guards, performance determination and availability vocabulary. Coal and solid fuels (11722, 11723, 11724, 11726, 11760) covers coal moisture, arsenic/selenium, fluorine, alternative-method validation and coal classification.
3. Representative Standards — Technical Points
3.1 BS ISO 11228-1 — Ergonomics manual handling (lifting and carrying)
BS ISO 11228-1:2003 specifies ergonomic requirements for manual lifting and carrying tasks, the core standard of occupational safety and ergonomics. Based on the NIOSH lifting equation, it specifies recommended weight limits, frequency, posture, distance and population conditions for evaluating lifting-task risk and guiding workplace design, covering lifting, lowering and carrying.
3.2 BS ISO 11258 — Reducibility of shaft-DRI feedstocks
BS ISO 11258:2015 specifies the determination of the reducibility index, final degree of reduction and degree of metallisation of iron ores for shaft direct-reduction (DRI) feedstocks, paired with 11256 (clustering index) and 11257 (low-temperature reduction-disintegration) — a key standard for evaluating the reduction performance of DRI pellets and lump ore in sponge-iron production.
3.3 BS ISO 12106 — Axial-strain-controlled fatigue testing
BS ISO 12106:2017 specifies the axial-strain-controlled fatigue test method for metallic materials, the foundation of low-cycle fatigue (LCF) testing. It specifies test machines, specimens, strain-control modes, cyclic waveforms, test temperature, failure criteria and data processing — used to evaluate low-cycle and thermal fatigue properties of high-temperature components (e.g. turbine and aero-engine materials), supported by 12107 (statistics) and 12111 (thermomechanical fatigue).
3.4 BS ISO 11494 — Jewellery platinum determination by ICP-OES
BS ISO 11494:2014 specifies the determination of platinum in platinum jewellery alloys by ICP-OES (yttrium as internal standard), a standard method for precious-metal content testing of jewellery. It specifies sample dissolution, standard solutions, internal-standard selection, spectral measurement and result calculation, and with 11495 (palladium) and 11427 (silver) supports jewellery fineness certification and trade settlement.
3.5 BS ISO 11723 — Arsenic and selenium in solid mineral fuels
BS ISO 11723:2016 specifies the determination of total arsenic and selenium in solid mineral fuels (Eschka mixture and hydride-generation method), a standard method for trace-element analysis of coal. It specifies ashing and fusion, hydride generation and atomisation, spectrometric measurement and precision data — used to evaluate arsenic, selenium and other trace-element content and environmental characteristics of coal.
4. Engineering Practice and Application
This batch supports practice across many fields. Occupational safety uses 11228 for lifting-risk evaluation and workstation design; iron and steel metallurgy uses 11256–11258 for DRI feedstock performance and 11722/11723 for coal analysis; materials testing uses 12106–12111 for fatigue testing and life prediction; jewellery uses 11427, 11494 and 11495 for precious-metal content; fire services use 11601 for wheeled extinguishers; archives use 11799 for collection storage conditions; construction uses 11527/11528 for sealant performance; crude-pipeline operators use 11563 for line filling; ships use 11209/11711 for gangways and ballast water; automotive uses 12097 for airbag vocabulary. Users should follow the current official BSI edition.
Appendix — Full Standard List
The table below lists all 150 single-file BS ISO standards in this batch, in numerical order, with standard number and title.
| Standard | Title |
|---|---|
| BS ISO 11156:2011 | BS ISO 11156:2011 Packaging — Accessible design |
| BS ISO 11158:2009 | BS ISO 11158 |
| BS ISO 11170:2013 | BS ISO 11170:2013 Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements |
| BS ISO 11171:2016 | BS ISO 11171:2016 Hydraulic fluid power — Calibration of automatic particle counters for liquids |
| BS ISO 11174:1996 | BS ISO Implementation of ISO 11174:1996 Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electro-thermal atomic absorption spectrometric method |
| BS ISO 11195:1995 | BS ISO 11195 |
| BS ISO 11197:2016 | BS ISO 11197:2016 Medical supply units |
| BS ISO 11209:2012 | BS ISO 11209:2012 Ships and marine technology and access gangways strength requirements |
| BS ISO 11218:2017 | BS ISO 11218:2017 Aerospace — Cleanliness classification for hydraulic fluids |
| BS ISO 11221:2011 | BS ISO 11221:2011 Space systems — Space solar panels — Spacecraft charging induced electrostatic discharge test methods |
| BS ISO 11222:2002 | BS ISO Air quality — Determination of the uncertainty of the time average of air quality measurements |
| BS ISO 11227:2012 | BS ISO 11227:2012 Space systems — Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact |
| BS ISO 11228-1:2003 | BS ISO 11228-1:2003 Ergonomics — Manual handling — Part 1: Lifting and carrying |
| BS ISO 11231:2010 | BS ISO 11231:2010 Space systems — Probabilistic risk assessment (PRA) |
| BS ISO 11235:2016 | BS ISO 11235:2016 Rubber compounding ingredients — Sulfenamide accelerators — Test methods |
| BS ISO 11237-1:2004 | BS ISO Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification — Part 1: Oil-based fluid applications |
| BS ISO 11256:2015 | BS ISO 11256:2015 Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index |
| BS ISO 11257:2015 | BS ISO 11257:2015 Iron ores for shaft direct- reduction feedstocks — Determination of the low- temperature reduction- disintegration index and degree of metallization |
| BS ISO 11258:2015 | BS ISO 11258:2015 Iron ores for shaft direct- reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization |
| BS ISO 11262:2011 | BS ISO 11262:2011 Soil quality — Determination of total cyanide |
| BS ISO 11270:2014 | BS ISO 11270:2014 Intelligent transport systems systems (LKAS) — Performance requirements and test procedures |
| BS ISO 11271:2002 | BS ISO BS Soil quality — Determination of redox potential — Field method |
| BS ISO 11277:2009 | BS ISO 11277 |
| BS ISO 11287:2011 | BS ISO 11287:2011 Green tea — Definition and basic requirements |
| BS ISO 11311:2011 | BS ISO 11311:2011 Nuclear criticality safety homogeneous plutonium- uranium oxide fuel mixtures outside of reactors |
| BS ISO 11320:2011 | BS ISO 11320:2011 Nuclear criticality safety — Emergency preparedness and response |
| BS ISO 11323:2010 | BS ISO 11323:2010 Iron ore and direct reduced iron |
| BS ISO 11336-1:2012 | BS ISO 11336-1:2012 Large yachts — Strength, weathertightness and watertightness of glazed openings Part 1: Design criteria, materials, framing and testing of independent glazed openings |
| BS ISO 11344:2016 | Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography |
| BS ISO 11345:2006 | BS ISO Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods |
| BS ISO 11346:2014 | BS ISO 11346:2014 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use |
| BS ISO 11347:2012 | BS ISO 11347:2012 Ships and marine technology Measurement and assessment of the visual appearance of coatings |
| BS ISO 11349:2010 | BS ISO 11349:2010 Water quality — Determination of low-volatility lipophilic substances — Gravimetric method |
| BS ISO 11350:2012 | BS ISO 11350:2012 Water quality — Determination of the genotoxicity of water and waste water fluctuation test (Ames fluctuation test) |
| BS ISO 11352:2012 | BS ISO 11352:2012 Water quality — Estimation of measurement uncertainty based on validation and quality control data |
| BS ISO 11354-2:2015 | BS ISO 11354-2:2015 Advanced automation technologies and their applications — Requirements for establishing manufacturing enterprise process interoperability Part 2: Maturity model for assessing enterprise interoperability |
| BS ISO 11382:2010 | BS ISO 11382:2010 Optics and photonics — Optical materials and components materials used in the infrared spectral range from 0,78 µm to 25 µm |
| BS ISO 11396:2012 | BS ISO 11396:2012 Crocodile skins — Presentation, description of defects, grading on the basis of defects, size |
| BS ISO 11398:2012 | BS ISO 11398:2012 Raw ostrich skins — Description of defects, guidelines for presentation and grading on basis of defects |
| BS ISO 11408:1999 | BS ISO 11408 |
| BS ISO 11413:2008 | BS ISO 11413 |
| BS ISO 11414:2009 | BS ISO 11414 |
| BS ISO 11424:2017 | BS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| BS ISO 11427:2014 | BS ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys method using potassium bromide |
| BS ISO 11433:1993 | BS 6783-15: ISO 11433: Sampling and analysis of nickel, ferronickel and nickel alloys — Part 15: Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption spectrometry UDC 669.245:543.422:546.22 BS ISO Nickel alloys — Determination of titanium content — Diantipyrylmethane molecular absorption spectrometric method Amendments/corrigenda issued since publication Date Comments Implementation of ISO amendment 1:2013 to ISO 11433:1993: new Subclause 4.13 inserted. This standard has been renumbered to match ISO identifier. |
| BS ISO 11443:2014 | BS ISO 11443:2014 Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers |
| BS ISO 11446-1:2012 | Road vehicles — Connectors for the electrical connection of towing and towed vehicles Part 1: 13-pole connectors for vehicles with to cross water fords |
| BS ISO 11450:1999 | BS ISO 11450 |
| BS ISO 11455:1995 | BS ISO Implementation of ISO 11455:1995 Raw optical glass — Determination of birefringence |
| BS ISO 11464:2006 | BS ISO Soil quality — Pretreatment of samples for physico-chemical analysis |
| BS ISO 11471:1995 | BS ISO 11471:1995 Agricultural tractors and machinery — Coding of remote hydraulic power services and controls |
| BS ISO 11475:2007 | BS ISO Paper and board — Determination of CIE |
| BS ISO 11476:2016 | BS ISO 11476:2016 Paper and board — Determination of CIE illumination conditions) |
| BS ISO 11483-3:2003 | BS ISO 11483 |
| BS ISO 11484:2009 | BS ISO 11484:2009 Steel products — Employer’s qualification system for non- destructive testing (NDT) personnel |
| BS ISO 11486:2006 | BS ISO Motorcycles — Methods for setting running resistance on a chassis dynamometer BS ISO contract. Users are responsible for its correct application. |
| BS ISO 11494:2014 | BS ISO 11494:2014 Jewellery — Determination of platinum in platinum jewellery alloys — ICP-OES method using yttrium as internal standard element |
| BS ISO 11495:2014 | BS ISO 11495:2014 Jewellery — Determination of palladium in palladium jewellery alloys — ICP-OES method using yttrium as internal standard element |
| BS ISO 11500:2008 | BS ISO 11500 |
| BS ISO 11505:2012 | BS ISO 11505:2012 Surface chemical analysis quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| BS ISO 11506:2009 | BS ISO 11506 |
| BS ISO 11513:2011 | BS ISO 11513:2011 Gas cylinders — Refillable welded steel cylinders containing materials for sub- atmospheric gas packaging Design, construction, testing, use and periodic inspection |
| BS ISO 11515:2013 | BS ISO 11515:2013 Gas cylinders — Refillable composite reinforced tubes of water capacity between construction and testing |
| BS ISO 11527:2010 | BS ISO 11527:2010 Building construction — Sealants — Test method for the determination of stringiness |
| BS ISO 11528:2016 | BS ISO 11528:2016 Buildings and civil engineering works — Sealants — Determination of crazing and cracking following exposure to artificial or natural weathering |
| BS ISO 11529:2013 | BS ISO 11529:2013 Milling cutters — Designation type milling cutters of solid or tipped design or with indexable cutting edges |
| BS ISO 11531:2015 | BS ISO 11531:2015 Metallic materials — Sheet and strip — Earing test |
| BS ISO 11532:2012 | BS ISO 11532:2012 Aircraft ground equipment |
| BS ISO 11533:2009 | BS ISO 11533 |
| BS ISO 11534:2006 | BS ISO Iron ores — Determination of tin — Flame atomic absorption spectrometric method |
| BS ISO 11535:2006 | BS ISO Iron ores — Determination of various elements — Inductively coupled plasma atomic emission spectrometric method |
| BS ISO 11536:2015 | BS ISO 11536:2015 Iron ores — Determination of loss on ignition — Gravimetric method |
| BS ISO 11561:1999 | BS ISO Ageing of thermal insulation materials — Determination of the long-term change in thermal resistance of closed-cell plastics test methods) |
| BS ISO 11563:2003 | BS ISO Crude petroleum and petroleum products — Bulk cargo transfer — Guidelines for achieving the fullness of pipelines |
| BS ISO 11566:1996 | BS ISO 11566: Implementation of ISO 11566:1996 Carbon fibre — Determination of the tensile properties of single-filament specimens |
| BS ISO 11567:1995 | BS ISO Implementation of ISO 11567:1995 Carbon fibre — Determination of filament diameter and cross-sectional area |
| BS ISO 11568-2:2012 | BS ISO 11568-2:2012 Financial services — Key management (retail) Part 2: Symmetric ciphers, their key management and life cycle |
| BS ISO 11596:2008 | BS ISO 11596:2008 Jewellery — Sampling of precious metal alloys for and in jewellery and associated products |
| BS ISO 11599:1997 | BS ISO Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste |
| BS ISO 11601:2017 | F i re f i gh t i n g Wh e e l e d f i re e x t i n g u i s h e r s P e r f o r m a n c e a n d c o n s t r u c t i o n B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e F S H F i r e e x t i n g u i s h e r s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O F i r e f i gh t i n g Wh e e l e d f i r e e x t i n g u i s h e r s P e r f o r m a n c e a n d c o n s t r u c t i o n L u t t e c o n t r e in c e n d ie E x t in ct e u r s su r r o u e s P e r f o r m a n c e s e t c o n st r u ct io n I N T E R N A T I O N A L S T A N D A R D I S O T h i r d e d i ti o n R e f e re n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 11617:2014 | BS ISO 11617:2014 Buildings and civil engineering works — Sealants — Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling |
| BS ISO 11620:2014 | BS ISO 11620:2014 Information and documentation — Library performance indicators |
| BS ISO 11629:2004 | BS ISO Cranes — Measurement of the mass of a crane and its components |
| BS ISO 11631:1998 | BS ISO Measurement of fluid flow — Methods of specifying flowmeter performance |
| BS ISO 11632:1998 | BS ISO Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method |
| BS ISO 11639:2010 | BS ISO 11639:2010 Aerospace — Part numbering for hose assemblies |
| BS ISO 11657:2014 | BS ISO 11657:2014 Hydrometry — Suspended sediment in streams and canals — Determination of concentration by surrogate techniques |
| BS ISO 11658:2012 | BS ISO 11658:2012 Cardiovascular implants and extracorporeal systems surface modifications for extracorporeal perfusion systems |
| BS ISO 11660-2:2015 | BS ISO 11660-2:2015 Cranes — Access, guards and restraints Part 2: Mobile cranes |
| BS ISO 11662-2:2014 | BS ISO 11662-2:2014 Mobile cranes — Experimental determination of crane performance Part 2: Structural competence under static loading |
| BS ISO 11674:2006 | BS ISO 11674:2006 Ships and marine technology |
| BS ISO 11676:2014 | BS ISO 11676:2014 Textile machinery and accessories — Pattern disks and pattern chains for warp knitting machines — Vocabulary and symbols |
| BS ISO 11684:1995 | BS ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
| BS ISO 11704:2010 | BS ISO 11704:2010 Water quality — Measurement of gross alpha and beta activity concentration in non-saline water — Liquid scintillation counting method |
| BS ISO 11706:2012 | BS ISO 11706:2012 Carbonaceous materials for the production of aluminium Determination of the fracture energy |
| BS ISO 11709:2011 | BS ISO 11709:2011 Soil quality — Determination of selected coal-tar-derived phenolic compounds using high performance liquid chromatography (HPLC) |
| BS ISO 11711-1:2013 | BS ISO 11711-1:2013 Ships and marine technology Ballast water sampling and analysis Part 1: Discharge sampling port |
| BS ISO 11712:2009 | BS ISO 11712 |
| BS ISO 11722:2013 | BS ISO 11722:2013 Solid mineral fuels — Hard coal in the general analysis test sample by drying in nitrogen |
| BS ISO 11723:2016 | BS ISO 11723:2016 Solid mineral fuels — Determination of arsenic and selenium — Eschka’s mixture and hydride generation method |
| BS ISO 11724:2016 | BS ISO 11724:2016 Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash |
| BS ISO 11726:2004 | BS ISO Solid mineral fuels — Guidelines for the validation of alternative methods of analysis |
| BS ISO 11727:1999 | BS ISO 11727 |
| BS ISO 11745:2010 | Brazing for aerospace applications — Qualification test for brazers and brazing operators — Brazing of metallic components |
| BS ISO 11749:2014 | BS ISO 11749:2014 Belt drive — V-ribbed belts for the automotive industry — Fatigue test |
| BS ISO 11760:2005 | BS ISO Classification of coals |
| BS ISO 11775:2015 | BS ISO 11775:2015 Surface chemical analysis — Scanning-probe microscopy — Determination of cantilever normal spring constants |
| BS ISO 11786:1995 | BS ISO Implementation of ISO 11786:1995 Agricultural tractors and machinery — Tractor mounted sensor interface — Specification |
| BS ISO 11790:2010 | BS ISO 11790:2010 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems |
| BS ISO 11794:2010 | BS ISO 11794:2010 Copper, lead, zinc and nickel concentrates — Sampling of slurries |
| BS ISO 11798:1999 | BS ISO 11798 |
| BS ISO 11799:2015 | BS ISO 11799:2015 Information and documentation — Document storage requirements for archive and library materials |
| BS ISO 11837:2011 | BS ISO 11837:2011 Machinery for forestry — Saw chain shot guarding systems — Test method and performance criteria |
| BS ISO 11839:2010 | BS ISO 11839:2010 Machinery for forestry — Glazing and panel materials used in operator enclosures for protection against thrown sawteeth — Test method and performance criteria |
| BS ISO 11852:2017 | BS ISO 11852:2017 Rubber — Determination of magnesium content of field natural rubber latex by titration |
| BS ISO 11856:2014 | BS ISO 11856:2014 Textile floor coverings — Test methods for the determination of fibre bind using a Modified Martindale Machine |
| BS ISO 11863:2011 | BS ISO 11863:2011 Buildings and building-related facilities — Functional and user requirements and performance comparison |
| BS ISO 11884-1:2006 | BS ISO Optics and photonics — Minimum requirements for stereomicroscopes — Part 1: Stereomicroscopes for general use |
| BS ISO 11886:2002 | BS ISO Building construction machinery and equipment — Pile driving and extracting equipment — Terminology and commercial specifications |
| BS ISO 11891:2012 | BS ISO 11891:2012 Hot formed helical compression springs — Technical specifications |
| BS ISO 11892:2012 | Space systems — Subsystems/units to spacecraft interface control document |
| BS ISO 11893:2011 | BS ISO 11893:2011 Space systems — Programme management — Project organization |
| BS ISO 11894-1:2013 | BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics Part 1: Oxide-ion-conducting solid electrolytes |
| BS ISO 11907-2:1995 | BS ISO Implementation of ISO 11907-2:1995 Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method |
| BS ISO 11925-3:1997 | BS ISO Amendment No. 1 Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
| BS ISO 11929:2010 | BS ISO 11929 |
| BS ISO 11933-3:1998 | BS ISO 11933 |
| BS ISO 11938:2012 | BS ISO 11938:2012 Microbeam analysis microanalysis — Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy |
| BS ISO 11972:2015 | BS ISO 11972:2015 Corrosion-resistant cast steels for general applications |
| BS ISO 11973:2015 | BS ISO 11973:2015 Heat-resistant cast steels and alloys for general applications |
| BS ISO 11994:1997 | BS ISO Cranes — Availability — Vocabulary |
| BS ISO 12000:2014 | BS ISO 12000:2014 Plastics/rubber — Polymer dispersions and rubber latices Definitions and review of test methods |
| BS ISO 12021:2010 | BS ISO 12021:2010 Road vehicles — Sensitivity to lateral wind — Open-loop test method using wind generator input |
| BS ISO 12040:1997 | BS ISO 12040: Graphic technology — Prints and printing inks — Assessment of light fastness using filtered xenon arc light |
| BS ISO 12043:2007 | BS ISO Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides |
| BS ISO 12044:2014 | BS ISO 12044:2014 Rolling bearings — Single-row angular contact ball bearings outer ring non-thrust side |
| BS ISO 12046:2012 | BS ISO 12046:2012 Synchronous belt drives Determination of physical properties |
| BS ISO 12097-1:2002 | BS ISO Road vehicles — Airbag components — Part 1: Vocabulary |
| BS ISO 12106:2017 | BS ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain- controlled method |
| BS ISO 12107:2003 | BS ISO Metallic materials — Fatigue testing — Statistical planning and analysis of data |
| BS ISO 12108:2012 | BS ISO 12108:2012 Metallic materials — Fatigue testing — Fatigue crack growth method |
| BS ISO 12111:2011 | BS ISO 12111:2011 Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method |
| BS ISO 12117-2:2008 | Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t |
| BS ISO 12124:2001 | BS ISO Acoustics — Procedures for the measurement of real-ear acoustical characteristics of hearing aids |
| BS ISO 12130-2:2013 | BS ISO 12130-2:2013 Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady- state conditions Part 2: Functions for calculation of tilting pad thrust bearings |
| BS ISO 12132:2017 | BS ISO 12132:2017 Plain bearings — Quality assurance of thin-walled half bearings — Design FMEA |
| BS ISO 12136:2011 | BS ISO 12136:2011 Reaction to fire tests — Measurement of material properties using a fire propagation apparatus |
| BS ISO 12140:2013 | BS ISO 12140:2013 Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks |
| BS ISO 12141:2002 | BS ISO Stationary source emissions — Determination of mass concentration of particulate matter concentrations — Manual gravimetric method |
| BS ISO 12152:2012 | BS ISO 12152:2012 BS 2000-604:2012 Lubricants, industrial oils and related products — Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig — Flender foam test procedure |
Frequently Asked Questions
What main fields does this batch cover?
This batch is the 150 independent standards from BS ISO 11156 to BS ISO 12152, spanning ergonomics, iron-ore direct reduction, space systems, water quality, jewellery precious metals, surface analysis, fatigue testing, cranes, coal and solid fuels.
This batch is the 150 independent standards from BS ISO 11156 to BS ISO 12152, spanning ergonomics, iron-ore direct reduction, space systems, water quality, jewellery precious metals, surface analysis, fatigue testing, cranes, coal and solid fuels.
What is the role of the manual handling standard (11228-1)?
BS ISO 11228-1:2003 specifies ergonomic requirements for manual lifting/carrying based on the NIOSH lifting equation for job-risk evaluation.
BS ISO 11228-1:2003 specifies ergonomic requirements for manual lifting/carrying based on the NIOSH lifting equation for job-risk evaluation.
What does the iron-ore direct-reduction series (11256–11258) cover?
It covers clustering index, low-temperature reduction-disintegration and reducibility index of shaft-DRI feedstocks.
It covers clustering index, low-temperature reduction-disintegration and reducibility index of shaft-DRI feedstocks.
What is the purpose of the axial-strain fatigue standard (12106)?
BS ISO 12106:2017 specifies axial-strain-controlled fatigue testing for low-cycle fatigue evaluation of high-temperature components.
BS ISO 12106:2017 specifies axial-strain-controlled fatigue testing for low-cycle fatigue evaluation of high-temperature components.
Why is the As/Se in solid fuels standard (11723) important?
BS ISO 11723:2016 specifies the Eschka-hydride method for arsenic and selenium in coal for trace-element evaluation.
BS ISO 11723:2016 specifies the Eschka-hydride method for arsenic and selenium in coal for trace-element evaluation.
⚠️ BS ISO 11195, 11483, 11727 and 11933 in this batch are scan editions; their content is written from public-domain knowledge in the field, and the authoritative text is the official BSI edition.