Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO·PART2 — BS ISO Standards Single-File Series Overview · Batch 2 — A Compilation of 150 International Standards (ISO) and Their Technical Points
This review covers 150 single-file ISO standards from BS ISO 1754 to BS ISO 3466, systematically summarising rubber and latex, iron ore sampling and chemical analysis, pulp and paper, cutting tools and machine tools, essential oils, threads and gauges, rolling bearings, hydrometry, ship windows and tobacco.
This review covers Batch 2 of the BS ISO single-file series, bringing together 150 independent International Standards (ISO) from BS ISO 1754 to BS ISO 3466. Continuing the mechanical and material foundations of Batch 1, it spans rubber and latex, iron-ore sampling and chemical analysis, pulp and paper, cutting tools and machine-tool accuracy tests, essential oils, trapezoidal threads and gauges, rolling bearings, hydrometry, ship windows, tobacco and cigars, and aerospace fasteners.
💡 This batch includes the iron-ore sampling and analysis series (3082–3087, 3271, 9507), the trapezoidal thread series (2901–2903), the synthetic rubber evaluation series (2302–2322, 2475, 2476), the needle-roller bearing series (3030, 3245) and the machine-tool accuracy test series (1985, 1986, 3070). Numerical values should be checked against the current official BSI edition.
1. Series Overview 📌
This batch covers the continuous range BS ISO 1754 to BS ISO 3466. Clusters: 1754–2031 belong to photography, pulp ash, raw rubber sampling, construction tolerances, belt drives, rubber liquid resistance, hoses, indexable inserts, conductive rubber, textile glass, rigid cellular plastics and coal size analysis; 2041–2531 belong to machine-tool accuracy, noise-induced hearing loss, natural rubber, latex sludge, synthetic latex, cork, pulp ash, closed-conduit flow, rigid foam, pipe-thread taps and rubber tension set; 2563–2969 belong to iron ores, whole-body vibration, aircraft fire, diesel engines, photographic exposure, library statistics, printing inks, vacuum quick-release couplings, antistatic rubber, nuclear-stack air sampling, trapezoidal threads, low-temperature retraction, alumina particle size, bulk-fuel hoses, cinematography, hydraulic filters, rotating-machinery vibration and cigarette diameter; 2974–3455 belong to diesel fuel injection, road-vehicle wheels, petroleum vapour pressure, building fire resistance, needle-roller bearings, corrugated fibreboard, essential oils, NDT magnifiers, boring/milling machines, ship cargo winches, iron-ore sampling, magnesium alloys, wood sampling, watch cases, aerospace nuts, drawn-cup bearing housings, pulp chlorine consumption, single-point tool corner radii, extra-long twist drills, reamers, rubber product tolerances, cigarette smoking machines, thread tools, hydraulic cylinder bores, textile glass, hardmetal inserts, rubber crystallisation and packaging dimensions; 3454–3466 belong to ship rectangular windows, subland twist drills, hydrometry and taper-pin reamers.
2. Series Composition and Main Standards
This batch has several large clusters. Rubber and latex (1795, 1817, 1823, 1827, 1853, 2000, 2004, 2005, 2028, 2285, 2302, 2303, 2322, 2475, 2476, 2878, 2921, 2939, 3302, 3387) covers raw rubber sampling, liquid resistance, shear modulus, conductive rubber, technically specified rubber, latex sludge, synthetic rubber evaluation, tension set, low-temperature retraction, product tolerances and crystallisation. Iron-ore sampling and analysis (2596, 2599, 3082, 3085, 3086, 3087, 3271, 9507, 9531, 9593, 10203) covers hygroscopic moisture, phosphorus, sampling precision and bias, lot moisture, tumble index and Si/Ca/Al/Fe content. Pulp and paper (1762, 1924, 2144, 2469, 3260) covers ash, tensile properties, diffuse reflectance and chlorine consumption. Cutting tools and machine tools (1832, 1985, 1986, 2284, 2537, 2540, 2541, 2584, 3070, 3286, 3291–3294, 3338, 3364, 3365, 3438, 3466) covers indexable inserts, grinding machines, boring/milling machines, taps, centre drills, cylindrical cutters, single-point tool corner radii, extra-long twist drills, subland drills and taper-pin reamers. Essential oils (3053, 3054, 3061, 3063, 3064, 3065, 3140) covers lavandin Abrial, black pepper, ylang-ylang, petitgrain, eucalyptus and sweet orange. Rolling bearings (3030, 3228, 3245) covers needle-roller bearings, drawn-cup housings and insert-bearing housings.
3. Representative Standards — Technical Points
3.1 BS ISO 2901–2903 — ISO metric trapezoidal screw threads
BS ISO 2901:2016 specifies the basic and design profiles of ISO metric trapezoidal screw threads, paired with BS ISO 2902:2016 (general plan) and BS ISO 2903:2016 (tolerances). Trapezoidal threads are widely used for transmission lead screws, jacks, valve stems and machine-tool feed mechanisms. The standard specifies the 30° thread angle, thread height, clearance, tolerance bands and fits, ensuring transmission accuracy and load capacity. It is identical to the GB/T 5796 series.
3.2 BS ISO 3087 — Iron ore lot moisture determination
BS ISO 3087:2011 specifies the determination of moisture in iron ore lots, a key standard for iron-ore trade measurement. It specifies sampling schemes, sample preparation, drying temperature and time, moisture calculation and reporting — used for dry-tonnage conversion and commercial settlement of seaborne iron ore, and is the basis of iron-ore quality inspection and trade.
3.3 BS ISO 2000 — Natural rubber technically specified rubber specification
BS ISO 2000:2014 provides guidelines for the specification of technically specified rubber (TSR), grading TSR by dirt, ash, nitrogen, volatiles, Mooney viscosity and colour index (e.g. TSR 3L, TSR 5, TSR 10, TSR 20). It is used for quality grading and inspection in natural-rubber trading, and is the core specification for sourcing rubber for tyres and rubber products.
3.4 BS ISO 1832 — Designation of indexable inserts
BS ISO 1832:2017 specifies the designation system for indexable hardmetal (carbide) inserts, the international naming convention for cutting tools. It defines feature codes for insert shape, clearance angle, tolerance, chip breaker, cutting-edge length, thickness, corner radius, cutting direction, mounting method and number of edges, enabling interchangeability of inserts from different manufacturers — widely used for turning, milling and boring tool selection.
3.5 BS ISO 2631-1 — Evaluation of human exposure to whole-body vibration
BS ISO 2631-1:1997 specifies requirements for evaluating human exposure to whole-body mechanical vibration (e.g. vehicles, machinery operation), the foundation of occupational health and ergonomics. It specifies frequency range, root-mean-square acceleration, crest factor, frequency weighting and exposure limits — used to assess the health effects of vibration on occupants of passenger vehicles, construction machinery and tractors.
4. Engineering Practice and Application
This batch supports practice across many fields. The rubber industry uses 2000/2004 for natural-rubber grading, 2302–2322/2475/2476 for synthetic-rubber evaluation and 3302 for product tolerances; steel raw materials use 3082, 3085–3087 and 3271 for iron-ore sampling and quality inspection; mechanical drives use 2901–2903 for trapezoidal threads and 3030/3245 for needle-roller bearings; machining uses 1832, 3364 and 3365 for indexable inserts and 1985/1986/3070 for machine-tool acceptance; ergonomics uses 2631-1 for occupant vibration exposure; petroleum products use 3007 for Reid vapour pressure; tobacco uses 2971 and 3308 for cigarette diameter and smoking-machine conditions. Users should follow the current official BSI edition.
Appendix — Full Standard List
The table below lists all 150 single-file BS ISO standards in this batch, in numerical order, with standard number and title.
| Standard | Title |
|---|---|
| BS ISO 01754:2010 | BS ISO 1754:2010 Photography — Cameras using Dimensions of picture sizes |
| BS ISO 01762:2015 | BS ISO 1762:2015 Paper, board and pulps — Determination of residue (ash) |
| BS ISO 01781:1983 | BS ISO 01781 |
| BS ISO 01787:1984 | BS ISO 01787 |
| BS ISO 01795:2017 | R u b b e r raw n a t u ra l a n d raw s yn t h e t i c S a m p l i n g a n d f u r t h e r p re p a ra t i v e p ro c e d u re s B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e P R I R a w m a t e r i a l s i n c l u d i n g l a t e x f o r u s e i n t h e r u b b e r i n d u s t r y A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O R u b b e r raw n a t u ra l a n d raw s yn t h e t i c S a m p l i n g a n d f u r t h e r p re p a ra t i v e p ro c e d u re s C a o u t c h o u c , n a t u r e l b r u t e t sy n t h t iq u e b r u t M t h o d e s d c h a n t ill o n n a g e e t d e p r p a r a t io n u lt r ie u r e I N T E R N A T I O N A L S T A N D A R D I S O F i f th e d i ti o n R e f e r e n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 01803:1997 | BS ISO 1803: Building construction — Tolerances — Expression of dimensional accuracy — Principles and terminology |
| BS ISO 01813:2014 | BS ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| BS ISO 01817:2015 | BS ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
| BS ISO 01823:2015 | BS ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service — Specification |
| BS ISO 01827:2016 | BS ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple- shear methods |
| BS ISO 01832:2017 | BS ISO 1832:2017 Indexable inserts for cutting tools — Designation |
| BS ISO 01853:2011 | BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity |
| BS ISO 01871:2009 | BS ISO 01871 |
| BS ISO 01887:2014 | BS ISO 1887:2014 Textile glass — Determination of combustible-matter content |
| BS ISO 01891:2009 | BS ISO 01891 |
| BS ISO 01922:2012 | BS ISO 1922:2012 Rigid cellular plastics — Determination of shear strength |
| BS ISO 01924-3:2005 | BS ISO Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min) |
| BS ISO 01926:2005 | BS ISO Rigid cellular plastics — Determination of tensile properties |
| BS ISO 01928:2009 | BS ISO 01928 |
| BS ISO 01952:2008 | BS ISO 01952 |
| BS ISO 01953:2015 | BS ISO 1953:2015 Hard coal — Size analysis by sieving |
| BS ISO 01977:2006 | BS ISO 01977 |
| BS ISO 01985:2015 | BS ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy |
| BS ISO 01986-1:2014 | BS ISO 1986-1:2014 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table Part 1: Machines with table length of up to |
| BS ISO 01999:2013 | BS ISO 1999:2013 Acoustics — Estimation of noise-induced hearing loss |
| BS ISO 02000:2014 | BS ISO 2000:2014 Rubber, raw natural — Guidelines for the specification of technically specified rubber |
| BS ISO 02004:2010 | BS ISO 2004:2010 Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications |
| BS ISO 02005:2014 | BS ISO 2005:2014 Rubber latex, natural, concentrate — Determination of sludge content |
| BS ISO 02006-1:2009 | BS ISO 02006 |
| BS ISO 02028:2015 | BS ISO 2028:2015 Synthetic rubber latex — Preparation of dry polymer |
| BS ISO 02031:2015 | BS ISO 2031:2015 Granulated cork — Determination of apparent bulk density |
| BS ISO 02041:2009 | BS ISO 02041 |
| BS ISO 02144:2015 | BS ISO 2144:2015 Paper, board and pulps — Determination of residue (ash) |
| BS ISO 02186:2007 | BS ISO Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements |
| BS ISO 02190:2016 | BS ISO 2190:2016 Granulated cork — Determination of moisture content |
| BS ISO 02219:2010 | BS ISO 2219:2010 Thermal insulation products for buildings — Factory-made products of expanded cork |
| BS ISO 02284:2017 | BS ISO 2284:2017 Hand taps for parallel and taper pipe threads — General dimensions and marking |
| BS ISO 02285:2013 | BS ISO 2285:2013 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
| BS ISO 02302:2014 | BS ISO 2302:2014 Isobutene-isoprene rubber (IIR) |
| BS ISO 02303:2011 | BS ISO 2303:2011 Isoprene rubber (IR) — Non- oil-extended, solution- polymerized types — Evaluation procedures |
| BS ISO 02314:2009 | BS ISO 02314 |
| BS ISO 02322:2014 | BS ISO 2322:2014 Styrene-butadiene rubber solution-polymerized types — Evaluation procedures |
| BS ISO 02328:2011 | BS ISO 2328:2011 Fork-lift trucks — Hook- on type fork arms and fork arm carriages — Mounting dimensions |
| BS ISO 02332:2009 | BS ISO 02332 |
| BS ISO 02385:2015 | BS ISO 2385:2015 Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste — Sampling to determine moisture content |
| BS ISO 02386:2015 | BS ISO 2386:2015 Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste — Determination of moisture content |
| BS ISO 02393:2014 | BS ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
| BS ISO 02403:2014 | BS ISO 2403:2014 Textiles — Cotton fibres — Determination of micronaire value |
| BS ISO 02407:1997 | BS ISO 02407 |
| BS ISO 02425:2010 | BS ISO 2425:2010 Hydrometry — Measurement of liquid flow in open channels under tidal conditions |
| BS ISO 02446:2008 | B S I S O I C S N O C O P YI N G W I T H O U T B S I P E R M I S S I O N E X C E P T AS P E R M I T T E D B Y C O P Y R I G H T L A W B R I T I S H S T AN D AR D M i l k D e t e r m i n a t i o n o f f a t c o n t e n t C o n f i r m e d M a r c h T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n S e p t e m b e r B S I I S B N Ame n d me n t s c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e C o m m e n t s B S I S O N a t i o n a l f o r e w o r d T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e AW /5 C h e m i c a l a n a l y s i s o f m i l k a n d m i l k p r o d u c t s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i mm u n i t y f r o m l e g a l o b l i g a t i o n s B S I S O R e f e r e n c e n u m b e r s I S O E I D F E I S O a n d I D F I N T E R N AT I O N AL S T AN D AR D I S O I D F S e c o n d e d i t i o n M i l k D e t e r m i n a t i o n o f f a t c o n t e n t L a i t D t e r m i n a t i o n d e l a t e n e ur e n m a t i r e g r a s s e B S I S O I S O E I D F E P D F d i s c l a i m e r T h i s P D F f i l e m a y c o n t a i n e m b e d d e d t y p e f a c e s I n a c c o r d a n c e w i th A d o b e s l i c e n s i n g p o l i c y , t h i s f i l e m a y b e p r i n t e d o r v i e w e d b u t s h a l l n o t b e e d i t e d u n l e s s t h e t yp e f a c e s w h i c h a r e e m b e d d e d a r e l i c e n s e d t o a n d i n s t a l l e d o n t h e c o m p u t e r p e r f o r m i n g t h e e d i ti n g I n d o w n l o a d i n g t h i s f i l e p a r t i e s a c c e p t t h e r e i n t h e r e s p o n s i b i l i t y o f n o t i n f r i n g i n g A d o b e s l i c e n s i n g p o l i c y N e i t h e r t h e I S O C e n t r a l S e c r e t a r i a t n o r t h e I D F a c c e p t s a n y l i a b i l i t y i n t h i s a r e a A d o b e i s a t r a d e m a r k o f Ad o b e S y s t e m s I n c o r p o r a t e d D e t a i l s o f t h e s o f t w a r e p r o d u c t s u s e d t o c r e a t e t h i s P D F f i l e c a n b e f o u n d i n t h e G e n e r a l I n f o r e l a ti v e t o t h e f i l e t h e P D F c r e a t i o n p a r a m e t e r s w e r e o p t i m i z e d f o r p r i n t i n g E v e r y c a r e h a s b e e n t a k e n t o e n s u r e t h a t t h e f i l e i s s u i t a b l e f o r u s e b y I S O m e m b e r b o d i e s a n d I D F n a t i o n a l c o m m i t te e s I n th e u n l i ke l y e v e n t th a t a p r o b l e m r e l a ti n g to i t i s f o u n d p l e a s e i n f o r m t h e I S O C e n tr a l S e c r e ta r i a t a t th e |
| BS ISO 02451:2014 | BS ISO 2451:2014 Cocoa beans — Specification |
| BS ISO 02469:2014 | BS ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| BS ISO 02471:2008 | BS ISO 02471 |
| BS ISO 02475:2011 | BS ISO 2475:2011 Chloroprene rubber (CR) — General-purpose types — Evaluation procedure |
| BS ISO 02476:2014 | BS ISO 2476:2014 Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures |
| BS ISO 02531:2009 | BS ISO 02531 |
| BS ISO 02537:2007 | BS ISO Hydrometry — Rotating-element current-meters |
| BS ISO 02540:2016 | Centre drills for centre holes with protecting chamfer — Type B |
| BS ISO 02541:2016 | Centre drills for centre holes with radius form — Type R |
| BS ISO 02558:2010 | BS ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene |
| BS ISO 02559:2011 | BS ISO 2559:2011 Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications |
| BS ISO 02561:2012 | BS ISO 2561:2012 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact- resistant polystyrene (PS-I) by gas chromatography |
| BS ISO 02563:2009 | BS ISO 02563 |
| BS ISO 02584:2016 | BS ISO 2584:2016 Cylindrical cutters with plain bore and key drive — Metric series |
| BS ISO 02596:2006 | BS ISO Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods |
| BS ISO 02599:2003 | BS ISO Iron ores — Determination of phosphorus content — Titrimetric method |
| BS ISO 02631-1:1997 | BS ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration Part 1: General Requirements BS ISO |
| BS ISO 02685:1998 | BS ISO 2685:1998 Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| BS ISO 02698:2016 | Diesel engines — Clamp-mounted fuel injectors, types 7 and 28 |
| BS ISO 02709:2008 | BS ISO 02709 |
| BS ISO 02721:2013 | BS ISO 2721:2013 Photography — Film-based cameras — Automatic controls of exposure |
| BS ISO 02789:2013 | BS ISO 2789:2013 Information and documentation — International library statistics |
| BS ISO 02836:2004 | BS ISO Graphic technology — Prints and printing inks — Assessment of resistance to various agents |
| BS ISO 02837:1996 | BS ISO Graphic technology — Prints and printing inks — Assessment of resistance to solvents |
| BS ISO 02861:2013 | BS ISO 2861:2013 Vacuum technology — Dimensions of clamped-type quick-release couplings |
| BS ISO 02878:2017 | R u b b e r vu l c a n i z e d o r t h e r m o p l a s t i c A n t i s t a t i c a n d c o n d u c t i v e p ro d u c t s D e t e r m i n a t i o n o f e l e c t r i c a l r e s i s t a n c e B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e P R I T e s t i n g a n d a n a l y s i s o f r u b b e r A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u n e A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O R u b b e r vu l c a n i z e d o r t h e r m o p l a s t i c A n t i s t a t i c a n d c o n d u c t i v e p ro d u c t s D e t e r m i n a t i o n o f e l e c t r i c a l r e s i s t a n c e C a o u t c h o u c v u lc a n isé o u t h e r m o p la st iq u e P r o du it s a n t ist a t iq u e s e t c o n d u ct e u r s D t e r m in a t io n d e la r sist a n c e le ct r iq u e I N T E R N A T I O N A L S T A N D A R D I S O F i f th e d i ti o n R e f e r e n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www |
| BS ISO 02889:2010 | BS ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities |
| BS ISO 02901:2016 | BS ISO 2901:2016 ISO metric trapezoidal screw threads — Basic and design profiles |
| BS ISO 02902:2016 | BS ISO 2902:2016 ISO metric trapezoidal screw threads — General plan |
| BS ISO 02903:2016 | BS ISO 2903:2016 ISO metric trapezoidal screw threads — Tolerances |
| BS ISO 02921:2011 | BS ISO 2921:2011 Rubber, vulcanized — Determination of low- temperature retraction (TR test) |
| BS ISO 02926:2013 | BS ISO 2926:2013 Aluminium oxide used for the production of primary aluminium Particle size analysis for the range 45 µm to 150 µm — Method using electro- formed sieves |
| BS ISO 02929:2014 | BS ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification |
| BS ISO 02939:2015 | BS ISO 2939:2015 Cinematography — Picture image area on 35 mm motion- picture release prints — Position and dimensions and analogue and digital photographic sound to picture record displacement |
| BS ISO 02941:2009 | BS ISO 02941 |
| BS ISO 02943:1998 | BS ISO Hydraulic fluid power — Filter elements — Verification of material compatibility with fluids |
| BS ISO 02954:2012 | BS ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| BS ISO 02962:2010 | BS ISO 02962 |
| BS ISO 02965:2009 | BS ISO 02965 |
| BS ISO 02969:2015 | BS ISO 2969:2015 Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres measurements |
| BS ISO 02971:2013 | BS ISO 2971:2013 Cigarettes and filter rods — Determination of nominal diameter — Method using a non-contact optical measuring apparatus |
| BS ISO 02974:2016 | pressure fuel injection components |
| BS ISO 03006:2015 | BS ISO 3006:2015 Road vehicles — Passenger car wheels for road use — Test methods |
| BS ISO 03007:1999 | BS ISO BS Methods of test for petroleum and its products — BS 2000-69: Petroleum products — Determination of vapour pressure — Reid method |
| BS ISO 03009:2003 | BS ISO Fire resistance tests — Elements of building construction — Glazed elements |
| BS ISO 03030:2011 | BS ISO 3030:2011 Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances |
| BS ISO 03034:2011 | BS ISO 3034:2011 Corrugated fibreboard — Determination of single sheet thickness |
| BS ISO 03039:2010 | BS ISO 3039:2010 Corrugated fibreboard — Determination of grammage of the component papers after separation |
| BS ISO 03045:2004 | BS ISO racemosa (Mill.) |
| BS ISO 03053:2004 | PRQLWRU UHODWHG LQWHUQDWLRQDO DQG (XURSHDQ GHYHORSPHQWV DQG BS ISO 3053:2004 ii BS ISO 3053:2004 LLL BS ISO 3053:2004 blank BS ISO 3053:2004 VSHFLILHV FHUWDLQ |
| BS ISO 03054:2017 | BS ISO 3054:2017 Essential oil of lavandin Abrial Lavandula latifolia Medik.), French type |
| BS ISO 03058:1998 | BS ISO Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers |
| BS ISO 03061:2008 | BS ISO Oil of black pepper |
| BS ISO 03063:2004 | BS ISO Oil of ylang-ylang Thompson forma |
| BS ISO 03064:2015 | BS ISO 3064:2015 Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay bigaradia Hook f.)) |
| BS ISO 03065:2011 | BS ISO 3065:2011 Oil of eucalyptus Australian type, containing a volume of 1,8-cineole |
| BS ISO 03070-2:2016 | BS ISO 3070-2:2016 Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 2: Machines with movable column along the X-axis (floor type) |
| BS ISO 03074:2014 | BS ISO 3074:2014 Wool — Determination of dichloromethane-soluble matter in combed sliver |
| BS ISO 03078:2016 | BS ISO 3078:2016 Shipbuilding — Cargo winches |
| BS ISO 03082:2017 | I ro n o re s S a m p l i n g a n d s a m p l e p re p a ra t i o n p ro c e d u re s B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e I S E I r o n o r e s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O I ro n o re s S a m p l i n g a n d s a m p l e p re p a ra t i o n p ro c e d u re s M in e r a is de f e r P r o c d u r e s d c h a n t illo n n a g e e t de p r p a r a t io n d e s c h a n t il lo n s I N T E R N A T I O N A L S T A N D A R D I S O F i f th e d i ti o n R e f e r e n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 03085:2002 | BS ISO Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement February 2010 |
| BS ISO 03086:2006 | BS ISO Iron ores — Experimental methods for checking the bias of sampling February 2010 |
| BS ISO 03087:2011 | BS ISO 3087:2011 Iron ores — Determination of the moisture content of a lot |
| BS ISO 03096:1996 | BS ISO 03096 |
| BS ISO 03116:2001 | BS ISO Magnesium and magnesium alloys — Wrought magnesium alloys |
| BS ISO 03129:2012 | BS ISO 3129:2012 Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| BS ISO 03140:2011 | BS ISO 3140:2011 Oil of sweet orange obtained by physical extraction of the peel |
| BS ISO 03160-2:2015 | BS ISO 3160-2:2015 Watch-cases and accessories — Gold alloy coverings Part 2: Determination of fineness, thickness, corrosion resistance and adhesion |
| BS ISO 03209:2016 | BS ISO 3209:2016 Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa MPa (at ambient Dimensions |
| BS ISO 03228:2013 | BS ISO 3228:2013 Rolling bearings — Cast and pressed housings for insert bearings — Boundary dimensions and tolerances |
| BS ISO 03245:2015 | BS ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring geometrical product specifications (GPS) and tolerance values |
| BS ISO 03260:2015 | BS ISO 3260:2015 Pulps — Determination of chlorine consumption (Degree of delignification) |
| BS ISO 03271:2015 | BS ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices |
| BS ISO 03286:2016 | BS ISO 3286:2016 Single point cutting tools — Corner radii |
| BS ISO 03291:2016 | BS ISO 3291:2016 Extra-long Morse taper shank twist drills |
| BS ISO 03292:2016 | BS ISO 3292:2016 Extra-long parallel shank twist drills |
| BS ISO 03293:2016 | BS ISO 3293:2016 Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive |
| BS ISO 03294:2016 | BS ISO 3294:2016 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive |
| BS ISO 03302-1:2014 | BS ISO 3302-1:2014 Rubber — Tolerances for products Part 1: Dimensional tolerances |
| BS ISO 03308:2012 | BS ISO 3308:2012 Routine analytical cigarette- smoking machine — Definitions and standard conditions |
| BS ISO 03315:2011 | BS ISO 3315:2011 Assembly tools for screws and nuts — Driving parts for hand- operated square drive socket wrenches — Dimensions and tests |
| BS ISO 03316:2012 | BS ISO 3316:2012 Assembly tools for screws and nuts — Attachments for hand- operated square drive socket wrenches — Dimensions and tests |
| BS ISO 03317:2015 | BS ISO 3317:2015 Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches |
| BS ISO 03318:2016 | BS ISO 3318:2016 Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads |
| BS ISO 03320:2013 | BS ISO 3320:2013 Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series |
| BS ISO 03338-2:2013 | BS ISO 3338-2:2013 Cylindrical shanks for milling cutters Part 2: Dimensional characteristics of flatted cylindrical shanks |
| BS ISO 03342:2011 | BS ISO 3342:2011 Textile glass — Mats — Determination of tensile breaking force |
| BS ISO 03343:2010 | BS ISO 3343:2010 Reinforcement yarns — Determination of twist balance index |
| BS ISO 03354:2008 | BS ISO 03354 |
| BS ISO 03364:2011 | BS ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
| BS ISO 03365:2016 | BS ISO 3365:2016 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions |
| BS ISO 03375:2009 | BS ISO 03375 |
| BS ISO 03387:2012 | BS ISO 3387:2012 Rubber — Determination of crystallization effects by hardness measurements |
| BS ISO 03394:2012 | BS ISO 3394:2012 Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages |
| BS ISO 03434:2012 | BS ISO 3434:2012 Ships and marine technology ships’ rectangular windows |
| BS ISO 03438:2013 | BS ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads |
| BS ISO 03454:2008 | BS ISO Hydrometry — Direct depth sounding and suspension equipment |
| BS ISO 03455:2007 | BS ISO Hydrometry — Calibration of current-meters in straight open tanks |
| BS ISO 03466:2016 | BS ISO 3466:2016 Machine taper pin reamers with parallel shanks |
Frequently Asked Questions
What main fields does this batch cover?
This batch is the 150 independent standards from BS ISO 1754 to BS ISO 3466, spanning rubber, iron ores, pulp and paper, cutting tools, essential oils, trapezoidal threads, rolling bearings, hydrometry and ship windows.
This batch is the 150 independent standards from BS ISO 1754 to BS ISO 3466, spanning rubber, iron ores, pulp and paper, cutting tools, essential oils, trapezoidal threads, rolling bearings, hydrometry and ship windows.
What is the significance of the trapezoidal thread standard (2901–2903)?
BS ISO 2901–2903 specify the basic profile, general plan and tolerances of ISO metric trapezoidal threads, used for lead screws, jacks and machine feed mechanisms.
BS ISO 2901–2903 specify the basic profile, general plan and tolerances of ISO metric trapezoidal threads, used for lead screws, jacks and machine feed mechanisms.
What is the role of the iron-ore moisture standard (3087)?
BS ISO 3087:2011 specifies lot moisture determination, used for dry-tonnage conversion and commercial settlement of seaborne iron ore.
BS ISO 3087:2011 specifies lot moisture determination, used for dry-tonnage conversion and commercial settlement of seaborne iron ore.
What is the purpose of the indexable insert designation standard (1832)?
BS ISO 1832:2017 specifies the designation system for indexable hardmetal inserts, enabling interchangeability between manufacturers.
BS ISO 1832:2017 specifies the designation system for indexable hardmetal inserts, enabling interchangeability between manufacturers.
What is the scope of the natural rubber grading standard (2000)?
BS ISO 2000:2014 provides guidelines for technically specified rubber (TSR) grading by dirt, ash, nitrogen, volatiles and Mooney viscosity.
BS ISO 2000:2014 provides guidelines for technically specified rubber (TSR) grading by dirt, ash, nitrogen, volatiles and Mooney viscosity.
⚠️ BS ISO 1781, 1787, 2006, 2041, 2446, 2471, 2531, 2563, 2941 and 3096 in this batch are scan editions; their content is written from public-domain knowledge in the field, and the authoritative text is the official BSI edition.