BS EN ISO 11807 — Integrated Optics: Vocabulary (Basic Terms and Classification Terms)

Integrated Optics — Vocabulary — Part 1: Basic Terms and Symbols & Part 2: Terms Used in Classification (2005)

📐 BS EN ISO 11807 is the British Standard implementing the European standard specifying terms and symbols in the field of integrated optics. The standard was developed by ISO/TC 172 “Optics and optical instruments”, adopted as a European standard by CEN, and implemented in the UK. This batch includes Part 1: Basic terms and symbols and Part 2: Terms used in classification, superseding the withdrawn BS ISO 11807 series. Integrated optics is an important branch of photonics, involving the design and manufacture of optical waveguides, couplers, modulators, and detectors. A unified vocabulary is essential for technical communication, product standardization, and industrial collaboration.

💡 A vocabulary standard is the “common language” of technical communication. Integrated optics spans optics, materials, electronics, and communications; inconsistent terminology causes ambiguity and confusion in product specifications. BS EN ISO 11807 provides a unified specification for the terms and symbols of integrated optics.

1. Scope and Overview of the Series 📌

BS EN ISO 11807 specifies terms, symbols, and classification methods in the field of integrated optics. Part 1 gives basic terms and symbols, covering fundamental concepts such as optical waveguide, refractive index, propagation mode, optical coupling, loss, modulation, and detection, together with their symbols. Part 2 gives terms used in classification, providing a unified classification and naming scheme for integrated optics devices (e.g., waveguide devices, couplers, modulators, optical switches).

The standard applies to the design, manufacture, testing, and trade of integrated optics devices, materials, and systems, and is the basis for terminology standardization, product standardization, and quality evaluation. The vocabulary covers the complete chain from fundamental physical concepts to device classification.

⚠️ Inconsistent terminology and symbols are one of the main obstacles in cross-disciplinary communication and international trade. The terms and symbols of this standard should be used in contracts, technical agreements, and product data sheets to avoid technical disputes caused by conceptual ambiguity.

2. Series Structure and Technical Highlights 🔧

PartStandard No.TitleMain Content
Part 1BS EN ISO 11807-1:2005Basic terms and symbolsFundamental terms and symbols for waveguides, modes, coupling, loss, modulation, detection
Part 2BS EN ISO 11807-2:2005Terms used in classificationClassification terms, naming, and numbering of integrated optics devices

The series uses a “basic terms plus classification terms” two-part structure: Part 1 defines the fundamental concepts, and Part 2 defines the device classification. Together they make the vocabulary of integrated optics cover both the physical foundations and engineering applications.

3. Key Technical Requirements 🔥

3.1 Basic terms and symbols (Part 1)

Part 1 specifies the basic terms of integrated optics, such as optical waveguide, propagation mode, effective refractive index, coupling coefficient, insertion loss, propagation loss, modulation, and detector, together with their symbols and units. These terms are the linguistic basis for describing the performance of integrated optics devices.

3.2 Terms used in classification (Part 2)

Part 2 specifies the terms used to classify and name integrated optics devices, covering waveguide devices, optical couplers, optical modulators, optical switches, optical detectors, and similar categories. The classification terms allow devices of the same type from different manufacturers to be identified and compared under a unified standard, facilitating product selection and trade.

3.3 Terminology standardization

The purpose of the standard is to establish a unified terminology system that eliminates ambiguity. Using the terms and symbols of this standard in technical documents, product data sheets, test reports, and contracts ensures consistency of communication. The standard also gives corresponding terms in multiple languages (English, French, German) to support international application.

✅ Application essentials: in technical documents, purchase contracts, and product specifications for integrated optics, use the terms and symbols of this standard uniformly and cite the referenced standard version, so that all parties have a consistent understanding of device performance and classification.

4. Engineering Practice Essentials 🛠️

  • 🔍 Technical documents: adopt the standard terms and symbols in technical agreements, product data sheets, and test reports.
  • 🔧 Product selection: identify and compare integrated optics devices from different manufacturers using the classification terms of Part 2.
  • 📊 Quality evaluation: describe device performance with unified loss, coupling, and modulation terms for ease of evaluation and acceptance.
  • 📋 International collaboration: use unified terminology in bilingual technical communication and international trade to reduce ambiguity and disputes.

5. Frequently Asked Questions ❓

❓ Q: Why is an integrated optics vocabulary standard needed?
A: Integrated optics spans multiple disciplines; inconsistent terminology causes ambiguity and confusion in product specifications. A unified vocabulary is the basis for technical communication, product standardization, and industrial collaboration.
❓ Q: How do Parts 1 and 2 relate?
A: Part 1 defines the basic terms and symbols (waveguide, mode, coupling, loss, etc.), while Part 2 defines the terms used in classification (device classification and naming). Together they form a complete terminology system.
❓ Q: What is an optical waveguide?
A: An optical waveguide is a dielectric structure that guides light waves along its interior, using refractive-index differences to confine and transmit light. It is the most fundamental structural element of integrated optics.
🔍 Q: What practical benefit comes from using the standard terminology?
A: Unified terms ensure consistency across technical documents, contracts, and product data sheets, avoid conceptual ambiguity, and facilitate product selection, quality evaluation, and international trade.
🔒
正在加载下载地址,请稍候 10 秒

Leave a Reply

Your email address will not be published. Required fields are marked *