Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
๐ BS EN ISO 10893 is the UK adoption of EN ISO 10893, identical to ISO 10893, specifying automated non-destructive testing (NDT) methods for steel tubes, applicable to seamless and welded tubes (submerged arc-welded tubes excluded unless otherwise stated). The series supersedes the corresponding parts of the former BS EN 10246 family, unifying electromagnetic, eddy-current, flux-leakage, magnetic-particle, penetrant, radiographic and ultrasonic methods under one ISO framework โ making it the NDT standard group referenced directly by steel-tube manufacturing assurance systems.
The BS EN ISO 10893 series has twelve parts, each covering one family of automated NDT methods used to verify specific quality characteristics of tubes at the manufacturing and acceptance stage: hydraulic leaktightness, surface imperfections, internal imperfections, weld imperfections and wall thickness. The series targets automated inspection equipment on continuous production lines, defining reference-tube preparation, calibration, sensitivity setting, scanning range and acceptance levels, plus guidance on which imperfection types (longitudinal / transverse / laminar / wall-thickness variations) each method detects.
Which part applies depends on tube size (outside diameter, wall thickness), manufacturing route (seamless / ERW / submerged arc welded) and the purchase requirements. Normally the ordering technical condition (e.g. material standards EN 10216, EN 10217) cites the relevant parts and their acceptable imperfection levels. NDT equipment must be formally verified and routinely sensitivity-checked; reference tubes with artificial flaws play a decisive role here.
| Standard | Method | Application |
|---|---|---|
| BS EN ISO 10893-1:2011 | Automated electromagnetic (leaktightness) | Hydraulic leaktightness of seamless and welded tubes (except SAW) |
| BS EN ISO 10893-2:2011 | Automated eddy current | Surface-imperfection detection |
| BS EN ISO 10893-3:2011 | Automated full peripheral flux leakage | Longitudinal and/or transverse imperfections |
| BS EN ISO 10893-4:2011 | Liquid penetrant inspection | Revealing surface-breaking defects |
| BS EN ISO 10893-5:2011 | Magnetic particle inspection | Surface and near-surface flaws in ferromagnetic tubes |
| BS EN ISO 10893-6:2011 | Radiographic testing of weld seam | Internal weld defects of welded tubes |
| BS EN ISO 10893-7:2011 | Digital radiographic testing of weld seam | Digital radiography (DR) weld testing |
| BS EN ISO 10893-8:2011 | Automated ultrasonic (laminar imperfections) | Laminar flaws perpendicular to the wall |
| BS EN ISO 10893-9:2011 | Automated ultrasonic (longitudinal flaws) | Flaws along the tube length |
| BS EN ISO 10893-10:2011 | Automated full peripheral ultrasonic | Longitudinal and/or transverse flaws (full periphery) |
| BS EN ISO 10893-11:2011 | Automated ultrasonic of weld seam | Longitudinal and/or transverse flaws in the weld seam |
| BS EN ISO 10893-12:2011 | Automated full peripheral ultrasonic wall-thickness | Wall-thickness measurement |
Part 1 specifies automated electromagnetic testing to verify hydraulic leaktightness of tubes: detecting coils surround the tube and the electromagnetic response indicates penetrating flaws; it applies to seamless and welded tubes (except SAW). Part 2 covers eddy-current testing for surface and near-surface flaws with differential-coil or other probe configurations, calibrated with artificial reference flaws.
Flux leakage magnetises ferromagnetic tubes; the leakage field from flaws is captured by sensors, revealing longitudinal and transverse defects at once. Ultrasonic methods are grouped by target: laminar flaws (normal incidence), longitudinal flaws (wave propagation around the circumference), transverse flaws and full peripheral coverage, weld-seam testing (for welded tubes, specifically on the weld zone), and wall-thickness measurement (Part 12). Each part defines transducer arrangement, wave mode, coupling and reference-tube techniques.
Penetrant testing reveals surface-opening flaws by dye indication and suits non-porous tube surfaces. Magnetic particle testing is limited to ferromagnetic materials and indicates surface and near-surface flaws by particle accumulation; it is generally used for sampling or local re-verification (e.g. ends, inspection faces) and is also common in field examination of in-service pipe.
Part 6 specifies film-based radiographic testing of welded-tube weld seams for evaluation of internal flaws such as porosity, slag, lack of fusion and cracks; Part 7 introduces digital radiography, allowing digital detectors and image processing to improve efficiency and digital archiving while maintaining detection capability.