Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
💉 BS EN ISO 08655 is the UK adoption by BSI of the ISO 8655 series covering piston-operated volumetric apparatus. It specifies terminology, general requirements, accuracy and precision, calibration methods and user recommendations for the piston-operated volumetric instruments widely used in laboratories, including pipettes, pipetting guns, burettes, dilutors and dispensers. It is a foundational standard for quality control in analytical chemistry and the life sciences. The series comprises seven registered parts, superseding relevant parts of BS 7653, BS 6018 and BS 7532.
Some parts of this series were sourced from scanned documents; the technical content is compiled from publicly available domain knowledge and the authoritative text remains the official BSI publication.
BS EN ISO 08655 applies to volumetric instruments that quantitatively aspirate, transfer and dispense liquids by the reciprocating motion of a piston, including single- and multi-channel pipettes, continuous dispensers, burettes and dilutors. The standard is organised as “terminology and general requirements (Part 1) + type-specific requirements (Part 2 onward) + user recommendations and calibration”, ensuring both methodological consistency and differentiation of metrological characteristics by instrument type.
The standard emphasises metrological traceability: the nominal capacity, maximum permissible error and precision should be verified by the gravimetric method (weighing the mass of water dispensed and converting to volume) or the volumetric method, with correction for temperature, pressure and liquid density, so results are comparable across laboratory conditions.
The table below lists the subject and scope of each part.
| Part | Subject | Scope | Edition |
|---|---|---|---|
| BS EN ISO 08655-1 | Terminology, general requirements and user recommendations | Terminology, general requirements, user advice | 2002/2010 |
| BS EN ISO 08655-2 | Piston pipettes | Piston pipettes (pipetting guns) | 2002/2009 |
| BS EN ISO 08655-3 | Piston burettes | Piston burettes | 2002/2009 |
| BS EN ISO 08655-4 | Dilutors | Dilutors | 2002/2009 |
| BS EN ISO 08655-5 | Dispensers | Dispensers | 2002/2009 |
| BS EN ISO 08655-6 | Volumetric apparatus — Requirements for user | User requirements and calibration advice | 2002/2009 |
| BS EN ISO 08655-7 | Non-radioactive volumetric apparatus (alternate) | Alternate non-radioactive volumetric apparatus | 2005/2009 |
In analytical chemistry, clinical diagnostics, pharmaceutical and life-science laboratories, the 08655 series is the basis for pipette selection, acceptance and routine QC. Laboratories determine the required range and accuracy class per the part requirements and check the manufacturer’s declared MPE at procurement. Equipment management verifies and periodically calibrates pipettes by the gravimetric method and keeps calibration records. Operators follow the user recommendations to standardise pipetting actions and reduce human error.
Multi-channel pipettes (8-, 12-channel etc.) are widely used in ELISA, PCR reaction setup and other high-throughput applications, where channel-to-channel consistency is critical. The standard constrains this through precision requirements, ensuring uniform dispensing across microplate wells.