BS EN ISO 08434 — Metallic Tube Connections for Fluid Power and General Use Series

Metallic tube connections for fluid power and general use (ISO 8434 series)

🔩 BS EN ISO 8434 is a British Standard published by BSI implementing the European Standard EN ISO 8434. It specifies metallic tube connections for fluid power systems (e.g. hydraulic and pneumatic) and general industrial use. The series covers connection types, dimensions, materials, performance requirements and test methods. The most representative types are the 24° compression fittings and the 24° cone connectors with O-ring weld-on nipples. The series spans several parts; this article focuses on two of them.

💡 The 24° compression fitting is one of the most widely used tube connection types in hydraulic and fluid power systems: it seals on a cone, is compact, and is easy to assemble and disassemble, making it common in construction machinery, machine tools, metallurgy and marine equipment.

1. Series Structure and Scope 📌

The BS EN ISO 8434 series falls under ICS 23.100.30 (pipe couplings for fluid power systems). The two parts discussed here are:

PartStandard No.Connection TypeTypical Application
Part 1BS EN ISO 8434-1:1998 (incl. amendment)24° compression fittingsSteel tube connection in hydraulic and pneumatic systems
Part 4BS EN ISO 8434-4:200024° cone connectors with O-ring weld-on nipplesHigh-pressure, high-reliability tube connections

UK participation was entrusted to BSI Technical Committee MCE/18, “Fluid power systems and components”. Part 1 is identical to ISO 8434-1:1994 and was originally BS ISO 8434-1:1994, renumbered to BS EN ISO 8434-1:1998 after implementation of the European Standard; Part 4 is identical to ISO 8434-4:1995.

2. Structure and Principle of 24° Compression Fittings 🔍

A 24° compression fitting mainly comprises a fitting body, a compression ring (ferrule) and a nut. Its working principle is:

  • Insert the metallic tube into the fitting body so the tube end rests on the conical seating face;
  • Tighten the nut, which drives the ferrule along the fitting body’s 24° cone;
  • The ferrule deforms under pressure and its cutting edge bites into the tube outer wall, forming a reliable mechanical connection and seal;
  • Simultaneously the tube end forms a metal-to-metal seal with the conical seating face, preventing fluid leakage.

Key features of this fitting:

  • Reliable sealing: cone metal seal, resistant to high pressure and vibration;
  • Easy assembly: no welding required, convenient for on-site installation and maintenance;
  • Applicable tube: mainly cold-drawn seamless steel tube, also some stainless steel tubes;
  • High standardisation: dimensions, threads and ferrule sizes are standardised for interchangeability.
⚠️ The quality of the ferrule bite directly determines joint sealing performance. If the ferrule bites too shallowly, the joint may loosen and leak under high pressure or vibration; too deep may damage the tube wall. Assemble to the specified torque or assembly procedure.

3. 24° Cone Connectors with O-Ring Weld-On Nipples 🔧

24° cone connectors with O-ring weld-on nipples (Part 4) introduce an O-ring on top of the 24° cone seal. Their structural features are:

  • O-ring seal: an O-ring is fitted at the cone mating face to provide an elastic seal, further improving sealing reliability;
  • Weld-on connection: the connector body is welded to the steel tube, suited to permanent installation and high sealing class;
  • High-pressure suitability: suited to fluid power systems with high pressure, frequent vibration and large temperature changes.

This type is often used in:

  • Main-line connections of high-pressure hydraulic systems;
  • Equipment with strict sealing requirements (e.g. metallurgical, mining, marine machinery);
  • Piping systems requiring resistance to vibration and shock.

4. Dimensions, Materials and Performance Requirements 📏

The Standard specifies key dimensions for each fitting type, including:

  • Nominal size: expressed by the mating tube outer diameter (e.g. 6, 8, 10, 12, 16, 20, 25, 30, 38 mm);
  • Thread size: normally metric, matched with the fitting body and nut;
  • Cone angle: the 24° cone is the core geometric element of the sealing connection;
  • Tolerances: ensure interchangeability and assembly accuracy.

For materials, fitting bodies and ferrules are typically carbon steel or stainless steel; O-rings use oil-resistant rubber (e.g. NBR) or fluoroelastomer (FKM), selected according to the working medium, temperature and pressure. Performance requirements generally include leak testing, pressure testing, vibration testing and impulse testing.

💡 Material selection key: the fitting must match system working pressure, medium type and working temperature. For high pressure, high temperature or corrosive media, choose high-strength stainless steel and the corresponding medium-compatible O-ring material to avoid leakage or failure.

5. Engineering Practice Applications 🛠️

  • 🔍 Selection workflow: determine tube outer diameter and working pressure → choose fitting type (compression or weld-on) → match fitting body, ferrule, nut and O-ring material → assemble to the standard dimensions.
  • 🔧 Installation control: use the correct tooling for compression fittings and assemble to the specified torque or turns; for weld-on fittings, ensure weld quality and clean weld slag.
  • 📊 Sealing test: after installation, carry out pressure and leak testing and confirm no leakage before service; test pressure should not exceed system design pressure.
  • 📋 Traceability: fittings should carry material identification and batch information; request material certificates from suppliers for traceability.

6. Frequently Asked Questions ❓

❓ Q: What is the difference between 24° compression fittings and 24° cone connectors with O-ring?
A: Compression fittings rely on the ferrule biting into the tube wall for connection and sealing; cone connectors with O-ring rely on a 24° cone fit plus an O-ring elastic seal and use a weld-on structure, giving a higher sealing class for high-pressure, high-reliability service.
❓ Q: What should be noted when installing compression fittings?
A: Ensure the tube end is square and deburred, insert fully before tightening the nut, and assemble to the specified torque or turns to avoid over-tightening (tube damage) or under-tightening (leakage).
❓ Q: How should O-ring material be selected?
A: Select according to working medium (mineral oil, water, gas), temperature range and pressure class. NBR is common for mineral oil; FKM for high temperature or strongly corrosive service, checking medium compatibility.
🔍 Q: Why has the 24° cone become a mainstream sealing structure?
A: The 24° cone forms a line-contact metal seal under small preload, giving high sealing pressure and reliable sealing while remaining compact and easy to assemble — hence its wide use in fluid power systems.
🔒
正在加载下载地址,请稍候 10 秒

Leave a Reply

Your email address will not be published. Required fields are marked *