BS EN 60598 — Luminaires General Requirements and Tests Standard Series

Luminaires — Part 1 General requirements and tests (EN 60598 / IEC 60598 family, 19 documents)
⚠️ Most of the 19 documents in this series are scanned copies (SCAN>0) and cannot be read line by line. This article is written from publicly available domain knowledge; always refer to the official BSI (British Standards Institution) published edition for exact requirements.

💡 BS EN 60598 is the British Standards Institution (BSI) adoption of the European standard EN 60598 (Luminaires), which is identical to or derived from the International Electrotechnical Commission standard IEC 60598. The series defines the safety requirements and tests for luminaires (except the separate light source) and is the core harmonised standard for luminaire products under the EU Low Voltage Directive (LVD 2014/35/EU) and CE marking. It is maintained by BSI Technical Committee CPL/34 (Lamps and Related Equipment), subcommittee CPL/34/4 (Luminaires), and classified under ICS 29.140.40 (Luminaires).

1. Series Overview 📌

BS EN 60598 adopts the “Part 1 general + Part 2 particular” structure: Part 1 (2015, General requirements and tests) is derived from IEC 60598-1:2014 and sets the common classification, marking, construction, external/internal wiring, earthing, protection against electric shock, durability and thermal tests, and ingress protection (IP) for all luminaires; Part 2-x gives additional particular safety requirements for each specific application (e.g. portable luminaires for children, aquarium luminaires, emergency lighting, recessed luminaires, road and street lighting, stage luminaires). BS EN 60598-1:2015 supersedes BS EN 60598-1:2008, with the old edition withdrawn in October 2017.

💡 Value: EN 60598, together with EN IEC 62031 (LED modules) and EN 61347 (lamp controlgear), forms the modern lighting product safety system; for LED luminaires the thermal, insulation and shock-protection requirements of Part 1 are especially critical.

2. Structure of the Series and Technical Highlights 📚

Part / DocumentLuminaire TypeTopic
BS EN 60598-1 (2015)General requirements and testsClassification, marking, construction, wiring, earthing, IP, thermal, durability
BS EN 60598-2-2 (2012)Recessed luminairesHeat dissipation and fire separation in structures
BS EN 60598-2-3 (2003+A1)Road and street lightingOutdoor road lighting safety
BS EN 60598-2-4 (1997)Portable general purposeHand-held / movable luminaire construction
BS EN 60598-2-5 (2015)FloodlightsFloodlighting and heat dissipation
BS EN 60598-2-6 (1995)Luminaires with built-in transformerBuilt-in supply safety
BS EN 60598-2-7 (1997)Portable garden luminairesGarden luminaire damp proofing
BS EN 60598-2-8 (2013)HandlampsHand-held lighting protection
BS EN 60598-2-10 (2003)Portable luminaires for childrenChild safety, material flammability, construction
BS EN 60598-2-11 (2013)Aquarium luminairesDamp-proof, splash-proof, electrical isolation
BS EN 60598-2-12 (2013)Mains voltage low-position luminaires (desk type)Table luminaire stability and temperature rise
BS EN 60598-2-13 (2006+A1)Ground-recessed / in-ground luminairesGarden in-ground luminaires
BS EN 60598-2-14 (2009)Cold-cathode and LED module luminairesNeon / cold-cathode and LED modules
BS EN 60598-2-18 (1994+A1)Swimming-pool and similar luminairesUnderwater / poolside shock protection
BS EN 60598-2-20 (2015)Light chains (string lights)Small series-wired luminaire electrical safety
BS EN 60598-2-21 (2015)Luminaires with flexible cable suspension systemTrack lighting connection safety
BS EN 60598-2-22 (2014)Emergency lighting luminairesEmergency evacuation lighting
BS EN 60598-2-24 (2013)Luminaires with restricted surface temperatureExplosion-protected / temperature-limited luminaires
BS EN 60598-2-25 (1995)Luminaires for hospitals and health careHealth-care environment lighting

3. Key Technical Requirements 🔧

3.1 General safety requirements (Part 1)

Part 1 classifies luminaires by electric shock protection (Class 0/I/II/III), IP degree, and their relationship to the mounting surface and combustible material, and specifies adequate creepage and clearance distances, reliable earthing (Class I), external/internal conductor selection, electric shock protection, plus durability, humidity, insulation resistance and high-voltage tests, and temperature rise and thermal tests.

3.2 Temperature rise and thermal tests

Under normal and abnormal conditions the temperature rise of each part must not exceed the limit permitted for the material and insulation, especially for insulation, enclosure, accessible parts and internal wiring; LED luminaires must focus on the thermal management of the driver and LED module.

3.3 Particular requirements for special luminaires

  • Portable for children (2-10): limits on material flammability, sharp edges, small parts and surface temperature to prevent injury;
  • Aquarium/pool (2-11/2-18): strengthened damp-proofing and shock-protection isolation (SELV Class III common);
  • Emergency (2-22): specifies emergency duration and changeover reliability;
  • Temperature-limited (2-24): limits surface temperature for dust/ gas hazardous locations.
✅ Compliance: to place luminaires on the EU/UK market, apply EN 60598-1 plus the relevant 2-x part for type testing and electrical safety assessment, meet the LVD essential requirements and affix the CE mark; LED/electronic controlgear also need EN 61347 compliance and EMC.

4. Engineering Practice and Application 🛠️

  • 🏗️ Design selection: determine the IP degree and shock-protection class from the installation environment (indoor/outdoor/damp/hazardous) and match the corresponding 2-x part.
  • 🔧 Installation: follow Part 1 wiring and earthing; recessed luminaires must keep thermal/insulation clearance from combustible ceilings.
  • 🧪 Acceptance: sample-check insulation resistance, earthing continuity, withstand voltage and temperature rise, and verify IP and marking consistency.
  • 🛡️ Special sites: use the dedicated 2-x luminaires for hospitals, pools and dusty environments to avoid accidents from misusing ordinary luminaires.

5. Frequently Asked Questions ❓

❓ Q: What is the relationship between Part 1 and Part 2?
A: Part 1 sets the general safety requirements for all luminaires, and Part 2-x adds particular requirements for each application; assessing a luminaire must satisfy both Part 1 and its corresponding 2-x.
❓ Q: Which requirements matter most for LED luminaires?
A: Beyond general shock protection and insulation, LED luminaires must focus on thermal management (driver and module temperature rise), heatsink design, and controlgear compliance (EN 61347).
❓ Q: Why are children’s luminaires separately specified?
A: Children may touch, bite or knock over luminaires; 2-10 specifically limits material flammability, surface temperature, sharp edges and small parts to reduce injury risk.
❓ Q: Does the scanned version affect engineering use?
A: This article is a scanned-version write-up from public knowledge; exact temperature limits and creepage distances should follow the official BSI edition. Certification and acceptance must reference the genuine standard.
🔒
正在加载下载地址,请稍候 10 秒

Leave a Reply

Your email address will not be published. Required fields are marked *