Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5578-04 (Reapproved 2015) provides a standardized method for determining ethylene oxide (ETO) in workplace atmospheres using hydrogen bromide (HBr) derivatization. This method is essential for monitoring occupational exposure to ETO, a high-volume industrial chemical used in manufacturing and sterilization.ā¦
📐 Scope and Terminology Framework ASTM D5576-00(2021) outlines a comprehensive standard practice for utilizing infrared spectrophotometry (FT-IR) to characterize the molecular architecture of polyolefins and polyolefin copolymers. The standard’s primary focus, as defined in Section 1.1, is the identification andā¦
📋 Scope and Application ASTM D5577-19 is a Standard Guide that provides a comprehensive overview of techniques for the separation and identification of contaminants in recycled plastic flakes or pellets. The document specifically targets post-consumer plastics and addresses a wideā¦
📐 Scope and Classification System The ASTM D5575-18 classification system is designed for thermoplastic compositions based on vinylidene fluoride (VDF) polymers modified with other fluorinated monomers, including hexafluoropropylene (HFP), tetrafluoroethylene (TFE), and chlorotrifluoroethylene (CTFE). These materials are typically supplied asā¦
📐 Scope and Applicability ASTM D5574‑94 (Reapproved 2021) provides standard test methods for establishing allowable mechanical properties of wood‑bonding adhesives for structural joints. These methods are modeled after Practice D245 and cover the determination of allowable shear stress, tensile stress, andā¦
ASTM D5572-95 (Reapproved 2019) establishes the performance requirements for adhesives used in finger joints within nonstructural lumber products, including interior and exterior mouldings, window and door components, and bonded-lumber panels. This specification provides a rigorous framework for classifying adhesives basedā¦
ASTM D5573 – 99 (Reapproved 2019) establishes a standard practice for classifying, identifying, and characterizing the failure modes observed in adhesively bonded fiber-reinforced-plastic (FRP) joints. Originally developed using glass fibers in a thermoset-polyester-resin matrix (sheet-molding compound, or SMC), the practiceā¦
ASTM D5571-22 specifies a standardized test method for determining the environmental stress crack resistance (ESCR) of plastic tight-head drums with a rated capacity not exceeding 60 gal (227 L). Serving as a crucial indicator of field performance, this method evaluatesā¦
ASTM D5570/D5570M-10 (Reapproved 2022) is a standardized test method under the jurisdiction of ASTM Committee D10 on Packaging. It prescribes a procedure to determine the water resistance of an adhesive or tape as measured by the amount of tape orā¦
ASTM D5569–94 provides a standardized test method for evaluating the static flow of electrical grade magnesium oxide (MgO) intended for use as insulation in sheathed heating elements. This method directly correlates with the powder’s angle of repose, a critical parameterā¦