Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5818-22 provides a standardized framework for the exposure and retrieval of geosynthetic samples from full-scale test sections. This practice is essential for evaluating the impact of installation techniques on the physical integrity and performance of geosynthetic materials. By comparing…
The ASTM D5817-20 standard specifies practices for reducing, blending, and drying gross samples of pelleted carbon black to prepare them for subsequent testing. This standard is essential for ensuring that test samples are representative and that measured characteristics are consistent…
ASTM D5815-95 (Reapproved 2001) defines a liquid chromatographic (LC) procedure designed for the separation and quantitation of phenolic antioxidants and erucamide slip additives in Linear Low-Density Polyethylene (LLDPE). The method relies on solvent extraction followed by reverse phase chromatography with…
🧪 Significance of the STSA Method ASTM D5816-99 defines the standard test methods for determining the external surface area of carbon black. This is achieved through the Statistical Thickness Surface Area (STSA) method. Unlike total surface area measurements, the STSA…
ASTM D5814-23 is a standard practice for determining contamination in recycled poly(ethylene terephthalate) (PET) flakes and chips using a plaque test. The method involves melting a representative sample into a transparent wafer or plaque, which is then examined for visual…
The ASTM D5812-96 (Reapproved 2002) standard, an American National Standard, defines the test method for the determination of organochlorine pesticides in water by capillary column gas chromatography. This rigorous method requires significant analyst expertise and emphasizes the importance of proper…
📐 Scope and Application of D5813-04 ASTM D5813-04 (Reapproved 2018) provides the standardized specification for Cured-In-Place Thermosetting Resin Pipe (CIPP) systems. This specification governs pipe with equivalent diameters ranging from 4 through 132 inches (100 to 3353 mm). The primary…
🧪 Test Method Overview and Scope The ASTM D5811-20 standard defines a rigorous procedure for the determination of radioactive Strontium-90 (⁹⁰Sr) in environmental water samples, including non-process and effluent waters. The method is validated for achieving a detection threshold of…
ASTM D581/D581M-12 defines the specifications for continuous glass filament greige braided tubular sleeving. This sleeving is widely utilized as electrical insulation as well as in structural and mechanical applications. The standard provides a comprehensive classification system for these essential industrial…
📐 Scope and Applicability of the Spiking Guide The ASTM D5810-96 (Reapproved 2021) standard provides a comprehensive guide for the general technique of “spiking” materials into aqueous samples. This guide is designed to assist analysts in preparing spiked samples for…