Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5938-96 serves as a foundational guide outlining the general principles for determining the tensile properties of a wide range of plastic materials. It provides the framework for standardization © 2026 TNLab — This article is a technical interpretation forā¦
This standard specifies requirements for multipurpose test specimens used for testing plastics, particularly for injection or compression molding materials. It is identical to ISO 3167 and provides a standardized approach for evaluating material properties. 📐 Scope and Specimen Types Thisā¦
ASTM D5934-02 defines a standardized procedure for determining the flexural modulus of elasticity in rigid and semi-rigid plastic specimens. By employing a controlled rate of loading with three-point bending geometry, this test method isolates the linear elastic region of theā¦
ASTM D5935 – 96 defines a standardized framework for generating and presenting comparable single-point property data for plastic materials. Technically equivalent to ISO 10350, this practice consolidates the specific test conditions from various material standards into a single, coherent specificationā¦
ASTM D5933-19 is a standard specification for 2 5/8-inch and 4-inch diameter metal shear plates used in wood construction. It standardizes dimensions and materials to ensure quality and reliability in connections. This specification is referenced in design and purchase documentsā¦
ASTM D5931-20 provides a standardized methodology for determining the density or relative density of glycols, glycerin, heat transfer fluids, engine coolant concentrates, and aqueous engine coolants using a digital density meter. Density is a fundamental physical property essential for characterizingā¦
ASTM D5932-20 provides a standardized method for the determination of airborne 2,4- and 2,6-Toluene Diisocyanate (TDI) monomers in workplace and ambient atmospheres. This method utilizes a selective derivatization technique with 9-(N-Methylaminomethyl) Anthracene (MAMA) for the collection and subsequent analysis ofā¦
The ASTM D5930-17 standard specifies the transient line-source technique for measuring thermal conductivity of plastics. This method, which has no known ISO equivalent, is applicable over a temperature range from –40 to 400°C and covers materials with thermal conductivity fromā¦
🧪 Scope and Application of D5929–18 The ASTM D5929 – 18 standard, Standard Test Method for Determining Biodegradability of Materials Exposed to Source-Separated Organic Municipal Solid Waste Mesophilic Composting Conditions by Respirometry, defines a controlled laboratory procedure for evaluating theā¦
📐 Scope and Standard Structure ASTM D5927-24 provides a standard classification system for thermoplastic polyester (TPES) materials intended for injection molding and extrusion. This standard is explicitly based on ISO test methods, promoting international consistency in material specification. It coversā¦