admin

💡 Standard Context: IEC 61261 “Medical electrical equipment — Dosimeters with ionization chambers for radiotherapy” is one of the most critical radiation dosimetry standards in radiotherapy. It specifies performance requirements, calibration methods, and usage protocols for cavity ionization chamber dosimeters…

💡 Standard Background: IEC 61262 “Medical electrical equipment — Characteristics of electro-optical X-ray image intensifiers” defines performance characteristic definitions and measurement methods for X-ray image intensifiers (XRII), including conversion factor, luminance distribution, contrast ratio, resolution, and modulation transfer function (MTF).…

💡 Standard Scope: IEC 61263 “Medical electrical equipment — Characteristics of gamma ray imaging detectors” specifies performance measurement methods for scintillation detector assemblies used in Anger-type gamma cameras and SPECT systems, including energy resolution, spatial resolution, uniformity, and count rate…

💡 Standard Scope: IEC 61264 “Medical electrical equipment — Characteristics of detectors for gamma ray imaging — System characteristics” is the companion standard to IEC 61263, specifying performance measurement methods for the complete gamma camera/SPECT system including collimators. It covers…

💡 Standard Background: IEC 61265 “Electroacoustics — Instruments for measurement of aircraft noise” is a specialized instrument standard for aircraft noise measurement. It specifies additional requirements for sound level meters and integrating-average sound level meters used in aircraft noise measurement,…

💡 Historical Note: IEC 61255 “Household Electric Heating Pads” has been withdrawn and fully superseded by IEC 60335-2-17 “Safety of Household Appliances — Particular Requirements for Heating Pads, Electric Blankets and Similar Flexible Heating Appliances.” This article examines the standard…

💡 Core Purpose: IEC 61256 specifies performance requirements, test methods, and acceptance criteria for installed monitoring assemblies used to detect radioactive contamination on personnel exiting controlled areas in nuclear facilities, radiological laboratories, and medical establishments. These instruments constitute a critical…

💡 Standard Scope: IEC 61258 “Medical electrical equipment — Radiotherapy simulators” is the core international standard for radiotherapy simulation and localization equipment. It specifies requirements for mechanical precision, radiation beam characteristics, image quality, and safety systems, ensuring consistency between simulation…

💡 Standard Overview: IEC 61260 “Electroacoustics — Octave-band and fractional-octave-band filters” is one of the most fundamental and important standards in acoustics and vibration measurement. It specifies performance requirements, test methods, and acceptance criteria for bandpass filter banks used in…

The long-term endurance of electrical insulating materials under AC voltage stress is a core determinant of power equipment service life. Whereas IEC 61244 (thermal ageing) addresses temperature-driven degradation, IEC 61251 specifically targets voltage stress-induced ageing mechanisms — including partial discharge…