Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Digitizer Performance Characterisation, Sampling Techniques and Measurement Uncertainty for High-Speed Transient Recording Scope: IEC TR 61321-1:1994 provides guidance on the selection, calibration, and use of transient data recording systems for capturing fast electrical transients such as lightning impulses, switching surges,…
A Comprehensive Technical Guide for Machine Designers and Safety Engineers Key Standard: IEC 61310-2:2007 specifies requirements for the indication, marking and actuation of machinery. It ensures that operators receive clear, unambiguous safety information through visual, audible and tactile means, and…
Principles, Shielding Design, and System-Level Protection for Critical Infrastructure Scope: IEC 61312-1:1995 provides fundamental principles for protection against lightning electromagnetic impulse (LEMP). It covers the physical phenomena of LEMP generation, coupling mechanisms into power and signal lines, and a systematic…
Comprehensive Guide to Fibre Optic Fan-Out Classification, Testing and Application Scope: IEC 61314-1-1:2011 defines performance requirements for fibre optic fan-out devices — components that break out individual fibres from a multi-fibre ribbon or loose-tube cable into discrete single-fibre cables with…
Measurement Standards, Uncertainty Analysis and Laboratory Best Practices Scope: IEC 61315:2005 specifies calibration procedures for fibre optic power meters used to measure optical power in fibre optic systems. It covers calibration methods, reference standards, measurement uncertainty evaluation, and reporting requirements.…
Tip: IEC 61306 defines a microprocessor bus standard specifically designed for nuclear instrumentation applications. It addresses the unique requirements of real-time data acquisition in nuclear environments, including deterministic timing, radiation-tolerant bus drivers, and fail-safe communication protocols for safety-critical monitoring systems.…
Tip: IEC 61307 provides standardised test methods for determining the performance characteristics of industrial microwave heating equipment. Published in 2011, this standard is essential for manufacturers, users, and testing laboratories involved in industrial microwave systems operating at ISM frequencies of…
Tip: IEC 61308 establishes standardised test methods for high-frequency (HF) dielectric heating equipment operating at ISM frequencies typically between 10 MHz and 50 MHz. Unlike microwave heating (IEC 61307, 915 MHz / 2.45 GHz), HF dielectric heating uses longer wavelengths…
Tip: IEC 61309 provides standardised test methods for evaluating the performance of household deep-fat fryers. Published in 1995, this standard enables consumers and manufacturers to compare the cooking performance, energy efficiency, and temperature control characteristics of different fryer designs under…
Tip: IEC 61302 provides a standardised framework for evaluating the thermal endurance of electrical insulating materials using both isothermal and cyclic ageing methods. Understanding this standard is essential for engineers designing insulation systems for motors, transformers, generators, and switchgear that…