Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Engineering methods for determining hot-spot temperature, thermal stability, and cooling requirements in power capacitor banks 📌 Scope: IEC TR 61917:1998 provides guidance on temperature measurement methods for power capacitors used in reactive power compensation, harmonic filtering, and power factor correction…
A comprehensive engineering analysis of the magneto-optical MiniDisc standard and its recording/playback system 📌 Scope: IEC 61909:2000 specifies the mechanical, electrical, and optical characteristics of the MiniDisc (MD) system — a 64 mm magneto-optical disc format for digital audio recording,…
Engineering analysis of Radiation Dose Structured Reports (RDSR) for radiography and radioscopy systems 📌 Scope: IEC 61910-1:2014 specifies requirements for radiation dose documentation in medical X-ray imaging. It defines a standardized structured report format — the Radiation Dose Structured Report…
Engineering principles for main control room design, human-system interface, and operator performance in nuclear facilities 📌 Scope: IEC TR 61911:2003 provides technical guidance on the design, evaluation, and validation of control rooms for nuclear power plants. It addresses human factors…
Engineering guide to over-current protective device coordination for electrical distribution systems 📌 Scope: IEC TR 61912-2:2009 provides technical guidance on selectivity (discrimination) between over-current protective devices (OCPDs) in low-voltage electrical installations. It covers selectivity between circuit-breakers, fuses, motor protection relays,…
Standard: IEC 61904-2000 | Category: Nuclear Instrumentation | Published: 2000 💡 IEC 61904 addresses the specific requirements for CAMAC modules used in nuclear spectroscopy — analog-to-digital converters (ADCs), multichannel analyzers (MCAs), and histogramming memory modules that form the core of…
Standard: IEC PAS 61906-2005 | Category: Nuclear Instrumentation (Publicly Available Specification) | Published: 2005 💡 As a Publicly Available Specification (PAS), IEC PAS 61906 addresses a critical gap in the CAMAC ecosystem: the management of firmware in microprocessor-based and FPGA-based…
Standard: IEC 61907-2009 | Category: Network Dependability | Published: 2009 💡 IEC 61907 provides a comprehensive framework for specifying, analyzing, and verifying the dependability of communication networks — covering everything from backbone fiber infrastructure to wireless access networks and industrial…
Standard: IEC TR 61908-2004 | Category: Nuclear Instrumentation (Technical Report) | Published: 2004 💡 The CAMAC Serial Highway extends the reach of CAMAC systems from a single room (parallel branch highway, 50 m) to plant-wide or even site-wide distances (several…
Standard: IEC TS 61895-1999 | Category: Nuclear Instrumentation (Technical Specification) | Published: 1999 💡 As a Technical Specification, IEC TS 61895 provides intermediate-stage standardization for CAMAC auxiliary controllers and branch highway interfaces — components that extend the basic CAMAC crate…