Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
A technical guide to IEC 62068:2013 – screening tests, endurance testing, and partial discharge evaluation for insulation systems under impulse stress IEC 62068:2013 provides a general test methodology for evaluating the electrical endurance of insulating materials and systems subjected to…
Designing Safe Machines with SIL-Based Performance Requirements Introduction and Scope IEC 62061 is the machinery-sector-specific functional safety standard derived from the generic IEC 61508 framework. Officially titled “Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic…
Improving IEC 60112 Through Multi-Laboratory Testing of Insulating Materials Introduction and Scope IEC TR 62062:2002, titled “Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112,” documents a comprehensive inter-laboratory investigation into methods for determining…
A Blueprint for Intelligent Substation and Switchgear Modernization Introduction and Scope IEC TR 62063:1999, titled “High-voltage switchgear and controlgear – The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear,” is a forward-looking technical report that…
Key Insight: IEC TR 62064 bridges the theoretical gap between two critical shielding metrics — surface transfer impedance (ZT) and screening attenuation (as) — providing essential guidance for RF cable designers and EMC engineers working on coaxial cable performance above…
IEC 62057-1:2023 specifies the requirements for electrical test equipment used to verify the compliance of low-voltage switchgear and controlgear assemblies (LVSCA) with the IEC 61439 series. This is the essential companion standard for test laboratories, switchgear manufacturers, and certification bodies.…
Standard: IEC 62058-11 | Full title: Electricity metering equipment — Acceptance inspection — Part 11: General acceptance inspection methods | Scope: Lot-by-lot acceptance inspection of electricity metering equipment Introduction: Why a Dedicated Acceptance Standard? Electricity metering equipment — including smart…
Foundational dependability concepts for electricity metering equipment covering reliability, availability, maintainability and life cycle management IEC TR 62059-11, published in 2002 as a Technical Report, provides the foundational concepts and general framework for dependability management of electricity metering equipment. This…
A Comprehensive User Guide for Battery Monitoring Systems Introduction to Battery Monitoring IEC TR 62060:2001, titled “Secondary cells and batteries – Monitoring of lead acid stationary batteries – User guide,” is a fundamental technical report that provides comprehensive guidance on…
IEC 62052-11:2020 is the cornerstone standard that defines the general requirements, test conditions, and performance criteria for all alternating current electricity metering equipment. Whether you are designing a smart meter for a utility grid or specifying acceptance tests for a…