Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
As the number of plug-in electric vehicles (PEVs) grows, standardized test procedures are essential to ensure chargers operate reliably without degrading grid power quality. SAE J2894/2-2015 provides these procedures, establishing a common framework for measuring harmonic distortion, power factor, voltageā¦
SAE J2896 provides comprehensive test methods for evaluating the comfort performance of motor vehicle seats. Updated in 2012, this recommended practice supersedes earlier measurements in SAE J782 and incorporates modern technology and terminology. It is essential for engineers involved inā¦
With the rise of electric parking brakes (EPBs) in modern vehicles, controlling actuation noise has become a critical factor in passenger comfort and brand perception. Until recently, there was no industry-wide standard for measuring EPB noise at the component level,ā¦
SAE J2282-2011, now stabilized, provides essential test methods, requirements, and guidelines for Distributed Lighting Systems (DLS) in motor vehicles. These systems transmit light from a remote source to one or more lighting functions, covering headlamps, fog lamps, auxiliary lamps, andā¦
Accurate friction measurement is essential in accident reconstruction to estimate vehicle speeds and stopping distances. SAE J2505 (Revised August 2010) establishes recommended practices for determining the frictional drag factor using either the braking distance method or accelerometer-based techniques. This guideā¦
The SAE J2730 standard (revised January 2021) provides a recommended practice for conducting dynamic cleat tests on pneumatic tires. This test method measures the high-frequency forces and moments generated when a rolling tire impacts a cleat, either perpendicular to theā¦
As electric vehicles continue to evolve, standardized performance testing of battery modules becomes essential for ensuring reliability and consistency. SAE J1798/1 (issued August 2020) provides a dedicated framework for evaluating lead-acid and nickel-metal hydride (NiMH) battery modules used in electricā¦
SAE J1998-2008 is a key standard that specifies dimensional features for rectangular piston rings of types R (straight-faced), B (barrel-faced), and M (taper-faced) with narrow ring width. Originally developed for reciprocating internal combustion engines up to 90 mm diameter (cast iron)ā¦
Understanding SAE J2100’s Role in Bonded Assembly Validation SAE J2100-2021, stabilized in January 2021, provides a set of recommended practices for simulating environmental aging of bonded assemblies used in automotive applications. Developed from original equipment manufacturer (OEM) requirements (General Motors,ā¦
SAE J1347 provides a standardized framework for specifying Manifold Absolute Pressure (MAP) transducers and similar pressure sensors used in automotive systems. By following this guide, engineers can create concise, complete specifications that reduce design time, procurement lead time, and costs.ā¦